High-breakdown-voltage AlInAs/GaInAs junction-modulated HEMT's(JHEMT's) with regrown ohmic contacts by MOCVD

A technology for increasing both the two-terminal gate-drain breakdown and subsequently the three-terminal-off-state breakdown of AlInAs/GaInAs high-electron-mobility transistors (HEMTs) to record values without substantial impact on other parameters is presented. The breakdown in these structures is dependent on the multiplication of electrons injected from the source (channel current) and the gate (gate leakage) into the channel. In addition, holes are generated by high fields at the drain and are injected back into the gate and source electrodes. These phenomena can be suppressed by increasing the gate barrier height and alleviating the fields at the drain. Both have been achieved by incorporating a p⁺-2DEG junction as the gate that modulates the 2DEG gas and by utilizing selective regrowth of the source and drain regions by MOCVD. The 1-μm-gate-length devices fabricated have two-terminal gate-drain and three-terminal-off-state breakdown voltages of 31 V and 28 V, respectively     

On the use of Buchberger criteria in G2V algorithm for calculating Gröbner bases

It has been experimentally demonstrated by Faugère that his F₅ algorithm is the fastest algorithm for calculating Gröbner bases. Computational efficiency of F₅ is due to not only applying linear algebra but also using the new F₅ criterion for revealing useless zero reductions. At the ISSAC 2010 conference, Gao, Guan, and Volny presented G²V, a new version of the F₅ algorithm, which is simpler than the original version of the algorithm. However, the incremental structure of G²V used in the algorithm for applying the F₅ criterion is a serious obstacle from the point of view of application of Buchberger’s second criterion. In this paper, a modification of the G²V algorithm is presented, which makes it possible to use both Buchberger criteria. To experimentally study computational effect of the proposed modification, we implemented the modified algorithm in Maple. Results of comparison of G²V and its modified version on a number of test examples are presented.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.     

高速数据转换器接口

数据转换器的复杂性随着采样频率及精度的提高而增加。高性能的数据转换器规格的设定必须遵循严格的输入条件,以实现器件预期性能的最大化。一个颇具挑战性的输入条件是:对ADC输入模拟信号进行测量、驱动和接口连接。本文将探讨一些对高速ADC进行有效接口连接的技术,从而使ADC实现性能最佳化。     

Study of Physically Transient Insulating Materials as a Potential Platform for Transient Electronics and Bioelectronics

Controlled degradation and transiency of materials is of significant importance in the design and fabrication of degradable and transient biomedical and electronic devices and platforms. Here, the synthesis of programmable biodegradable and transient insulating polymer films is reported, which have sufficient physical and chemical properties to be used as substrates for the construction of transient electronics. The composite structure can be used as a means to control the dissolution and transiency rate of the polymer composite film. Experimental and computational studies demonstrate that the addition of gelatin or sucrose to a PVA polymer matrix can be used as a means to program and either slow or enhance the transiency of the composite. The dissolution of the polymer composites are fitted with inverse exponential functions of different time constants; the lower time constants are an indication of faster transiency of the polymer composite. The addition of gelatin results in larger time constants, whereas the addition of sucrose generally results in smaller time constants.     

New method in design and manufacturing of fluid-filled multi-layered spherical pressure vessels

Multi-layered spherical pressure vessels were manufactured through the application of the integral hydro-bulge forming (IHBF) method. A spherical pressure vessel consisting of five layers of AISI 1018 steel was manufactured. The thickness of each layer was approximately 1.6 mm and each layer was separated by a fluid filled gap from the next layer. The process showed a linear relationship between the number of layers and the maximum pressure that the vessel can support before leaking (burst pressure). The IHBF method promises to be less costly and more effective in the manufacturing of thick multi-layered vessels in comparison with the conventional practice of manufacturing such vessels. In this paper the procedure of manufacturing the vessels, the welding technique and the results of the forming process will be presented.     

An efficient data dissemination model for wireless sensor networks

Wireless Networks - In a wireless sensor network, one of the most important constraints on sensor nodes is their power source, which is a battery. Sensor nodes carry a limited and generally...     

Development of a triangular-plate MEMS tunable capacitor with linear capacitance-voltage response

This paper introduces a modified structure for parallel-plate-based MEMS tunable capacitors. The capacitor has triangular electrodes with geometric and structural asymmetry, which enhances its performance. The device structure is also equipped with a set of cantilever beams between capacitor’s electrodes, called middle beams. These beams provide extra stiffness as tuning voltage increases and delay the pull-in which results in a higher tunability. They also reduce the high sensitivity of the capacitance to the voltage change and linearize the C-V response. An analytical model is developed to optimize the capacitor’s dimensions for maximum linearity of the response. Numerical simulations demonstrate tunabilities over 150% where more than 2/3 of which is highly linear. Capacitors fabricated with PolyMUMPs verify that the design technique proposed in this paper can improve the linearity of the device and increase the maximum tunability. The proposed design has a simple geometry and is fabricated using three structural layers, and therefore, it can be easily integrated in tunable filters or other RF circuits.     

Advanced Functional Structure‐Based Sensing and Imaging Strategies for Cancer Detection: Possibilities,Opportunities, Challenges,and Prospects

Cancer is the second most common cause of death in the world. The principal limitations thus far encountered in the clinical practice of probing cancer are diverse and include low sensitivity, time consumption, bulkiness, and cost. In this respect, nanomaterial (NM)‐based sensing techniques are recognized as a superior alternative to efficiently resolve such limitations. A better understanding of NM‐based sensing platforms is thus important so that these novel avenues can easily be explored for clinical applications. These platforms have the merits of high sensitivity, high specificity, rapid response, and easy‐to‐read signals. This review offers a comprehensive survey of NM‐based advanced cancer‐sensing techniques and will help the scientific community establish optimum sensing strategies based on an accurate assessment of the interactions between cancer biomarkers and NM‐based platforms.     

On the necessary and sufficient requirement of a CIOQ switch to emulate an Output Queued switch

There has been much interest to emulate the behavior of Output Queued switches. The early result of such attempts was reported by Prabhakar and McKeown using the CIOQ switches with speedup factor of 4. Subsequently, Stoica and Zhang and independently Chuang et al. showed that a speedup of 2 in conjunction with their scheduling schemes would be sufficient for CIOQ switches to emulate Output Queued switches.Additionally, Chuang et al. showed that in “Average Sense” a speedup of 2?1/N is necessary and sufficient for CIOQ to emulate Output Queued switch behavior.Our paper reports that in the “Strict Sense” a speedup of 2 is both necessary and sufficient. We show this requirement using examples for 2x2 and 3x3 switches. Then, with a constructed traffic pattern, it is proved that in the “Strict Sense” a speedup of 2 is necessary to emulate the behavior of an Output Queued switch for any switch size N.Combining this result with the previous scheduling schemes, we conclude that in the “Strict Sense”, a speedup of 2 is the necessary and sufficient condition to emulate the behavior of an Output Queued switch, using a CIOQ switch.Additionally, easing the assumptions and allowing the packet segmentation, it is shown that the speedup requirement to emulate the behavior of an Output Queued switch can be reduced to values even smaller than 2?1/N. For this case a lower bound of 3/2 and an upper bound of 2 is proved.