3-D face recognition method based on optimum 3-D image measurement technology

Most face recognition systems employ 2-D color or gray-scale images. However, face recognition based on 2-D images is adversely affected by 3-D movement, variable lighting, and the use of cosmetics. 3-D image measurement technology has the potential to overcome these limitations of face recognition based on 2-D images since it can perform geometric analysis. We propose a method that is capable of recognizing a person from a 3-D facial image obtained using a 3-D shape measurement system by employing a technique that optimizes the intensity-modulation pattern projection. This face recognition method is based on the iterative closest point algorithm. It is robust to changes in reflectivity and color. Since the 3-D facial information can be registered, this method can estimate rotations and translations to compensate for different positions or directions. In order to prove the validity of the proposed technique, a verification experiment was conducted which used 105 sample 3-D images obtained from 15 subjects. It achieved a detection rate of 96% when heads were turned at an angle of 20° or less relative to the camera.     

Application of the solid polymer electrolyte (SPE) method to organic electrochemistry—III. Kolbe type reactions on Pt-SPE

The feasibility of a solid polymer electrolyte (SPE) method for Kolbe type reactions was investigated by using Pt-SPE composed with Nafion 415 and platinum. The Kolbe reaction of acetic acid proceeded effectively on one side and both sides Pt-SPE composites. The lower current efficiency was observed on the latter than on the former. Neat acetic acid could also be electrolysed on both sides SPE though the cell voltage was fairly high.A methanolic solution of monomethyl adipate was electrolysed to give dimethyl sebacate on both sides Pt-SPE according to the Brown-Walker reaction. The current efficiency and the terminal voltage increased with the concentration of monomethyl adipate. Pt-SPE behaved as an active electrode of a high roughness factor, eg about 6, for the Kolbe reaction of acetate.     

Investigation of the effect of surface phosphate ester dispersant on viscosity by coarse-grain modeling of BaTiO slurry

To understand the role of phosphate ester dispersant, we investigated the rheology of a BaTiO slurry. For the model case, a coarse-grain molecular dynamics (CGMD) simulation was performed with the butyral polymer didodecyl hydrogen phosphate (DHP) in the toluene/ethanol solvent. By systematically analyzing the effect of DHP from an atomic-scale first principle and from all-atom MD to microscale CGMD simulation, we investigated how the adsorption of a DHP dispersant on a BaTiO surface affects the microstructure rheology of a BaTiO slurry. The first-principle and all-atom MD simulation suggests that DHP molecules prefer to locate near the BaTiO surface. CGMD simulation shows a reduction in viscosity with an increase in dispersants, suggesting that the dispersant population near the BaTiO surface plays a key role in controlling the rheology of the BaTiO slurry. In this study, we propose an approach for understanding the BaTiO slurry with molecular-level simulations, which would be a useful tool for efficient optimization of slurry preparation.     

Stabilization of β-Bi2O3 by Sb2O3 Doping

The metastable β form of bismuth sesquioxide was obtained by doping antimony oxide. The solubility of antimony was 4 to 10 at. %in β specimens, where more than 75% of the antimony atoms were valenced at 5+.     

Nonlinear control for rotational movement of cart-pendulum system using homoclinic orbit

In this paper, we deal with the control method for rotational movements of a pendulum using a separatrix. We design a controller that attains a homoclinic motion or a heteroclinic motion of the pendulum and the asymptotic stability of the cart by using a kind of forwarding control design. First, we derive a controller that converges to a homoclinic orbit via a Lyapunov function of the pendulum subsystem. Next, we give a nonlinear stabilizing controller via another Lyapunov function of the cart subsystem. Moreover, using the third Lyapunov function and adding a complementary control input, we guarantee that the pendulum converges to the homoclinic orbit and the cart is stabilized. Finally, the simulation and the experiment using the rapid controller prototyping system based on MATLAB/Simulink are performed to demonstrate the forward upward circling and the giant swing of the pendulum.     

Multiple uses of Essential Oil and By-Products from Various Parts of the Yakushima Native Cedar (Cryptomeria Japonica)

This article presents multiple potential uses of the Yakushima native cedar (Cryptomeria japonica), known in Japan as the Yaku-sugi tree. The Yaku-sugi was divided into four parts: leaves, branches with leaves, branches, and stems. We obtained the essential oil, hydrosol, distillation residue, and distillation wastewater from the trees. Essential oil and hydrosol were determined to be volatile organic compounds. All samples were screened for the following bioactivities: antioxidative, antibacterial, and anti-melanogenesis activities. Freeze-dried distillation residue was tested to assess whether it had a deodorizing effect. The main component of the leaf essential oil was found to be monoterpenes. In contrast, the stem essential oil mainly contained sesquiterpenes. In terms of bioactivities, the leaf essential oil showed antibacterial activity and the stem essential oil showed anti-melanogenesis activity. Distillation residue and wastewater showed many activities, including antioxidant, antibacterial, and anti-melanogenesis activities. Moreover, the residue had a deodorizing effect against ammonia.     

Superstructure-based design and operation for biomass utilization networks

This paper is providing a design and evaluation methodology for biomass utilization networks (B-NETs) planning in local areas. The methodology is an effort to integrate various exertions of many researchers as well as stakeholders in the biomass field including process technologies, local area classification and renewable energy mechanisms to design and evaluate B-NETs. The proposed design methodology has three steps: classification, problem formulation and suggesting solution methods. The core part of planning the B-NETs utilization methodology is the superstructure that is a super class model for the processes of biomass utilization networks that has to be built for the local area. The biomass utilization superstructure (BUSS) relates the biomass resources to their products, available processes, and possible future processes of utilization in static manner. Although the local area BUSS is static in nature, it shows the decision makers what kinds of B-NETs are, or can be, available in their area. It is important to note that for each super class process there exists a number of elemental technologies, or what we call unit process (UP), that can perform the job under the same condition with different processing constraint. To support the design and operation process a technological information infrastructure (TII) needs to be built to work as an information pool and simulation tool. With the support of TII and the BUSS different scenarios can be synthesized, analyzed and compared. Scenarios development enables the designer to check processing alternatives as well as biomass promotion mechanisms that fit the concerns of various stakeholders. The results of the methodology application can be given in the form of suggestions of a specific network class(es) or scenarios that can be applied in a class of localities with the same characteristics. Following to methodology configuration, a proposal for optimization methods is discussed and a case study for comparing biomass network scenarios in mountainous city is introduced.     

A promising application for broadband ISDN: Hypermedia teleconference

The optimum BISDN teleconference service for business, called hypermedia teleconference, is designed based on research into typical business activities and ATM, the most promising BISDN architecture. Service characteristics are determined by analysing the daily work practices of a large set of businessmen. It is shown that communication tasks occupy 44 per cent of the working day. The analysis further shows that some 60 per cent of all communication tasks could be performed through an advanced digital teleconference service. Hypermedia teleconference is designed to satisfy the needs of business through personal communication terminals and ATM public networks. The terminals effectively allocate the BISDN's high-speed transmission capability between a number of subchannels that realize distributed multipoint connection links and multimedia paths. The terminals use a new variable-bit-rate ATM codec created to realize high quality video. Users can easily create full featured teleconferences without a centralized connection facility. Terminals allow the synergistic combination of video, voice, telewriting, telepointing and document transmission services.     

Mechanochemical block copolymerization in heterogeneous systems of the solid poly(vinyl chloride) with styrene by ultrasonic irradiation

Summary Mechanochemical block copolymerization in heterogeneous systems of the solid poly(vinyl chloride)-styrene-sodium dodecyl sulfate aqueous solutions has been studied by ultrasonic irradiation at 65 °C. The block copolymerization of styrene was initiated by free radicals produced from the poly(vinyl chloride) particles by ultrasonic waves. The initial rate of the block copolymerization Rp was given by Rp α [Styrene] [Sodium dodecyl sulfate]^1/2. Both copolymer and homopolymer were obtained. For example, when 2.506 g of the poly(vinyl chloride) particles, 24.23 g of styrene, and 54.00 g of sodium dodecyl sulfate aqueous solution (0.500 wt%) were added in the reaction system, the weight proportions of the block copolymer and polystyrene after 60 min were approximately 50 and 20%.