IMPINGING JET DRYER

In coating and gravure printing, an impinging jet nozzle with high thermal efficiency for drying of coated film was developed.

Trial production 0f 40 kinds of nozzle enables to develop a high-performance impinging jet nozzle with heat transfer coefficient 1.5 times larger than that of current slit nozzle, through measurement of heat transfer coefficient, visualizations of air flow and heat transfer, and measuremenu of jet velocity and turbulence distribution. The purpose of the trial production was to expand a range of high heat transfer and promote turbulence compared with the current nozzle.

Paying attention to mass transfer within gravure ink coated film, drying characteristic of the film was analyzed by numerical solution of a set of equations governing the drying process in which concentration dependencies 0f the diffusion coefficient and the equilibrium vapor pressure were considered.

Applying these analyses. an industrial scale dryer with excellent drying efficiency has finally been developed.     

Microstructure and superconducting properties of rapidly-quenched copper-based alloys containing immiscible lead and bismuth elements

Copper-based superconducting alloys including finely dispersed f c c lead or h c p (Pb- Bi) particles in f c c copper matrix have been obtained by rapid quenching (Cu-M)_100-x Pb_x and (Cu-M)_100-x (Pb_0.6Bi_{0.4 x} (M = aluminium, silicon or tin;x < 10 at%) alloys containing immiscible elements such as lead and bismuth. The particle size and interparticle distance were about 30 to 130 nm and 20 to 200 nm for had particles and about 30 to 60 nm and 30 to 150 nm for (Pb- Bi) particles. The transition temperature,T _c, was in the range of 3.2 to 5.5 K for the Cu-M-Pb alloys and 6.2 to 6.3 K for the Cu-M-Pb-Bi alloys. Critical magnetic field,H _c2, and critical current density,J _c, for the later alloys were 0.47 to 0.93T at 4.2 K and 1.1 × 10⁵ to 2.7 × 10⁵ Am^–2 at zero applied field and 4.21 K. The mechanism of the appearance of such a soft-type superconductivity for the rapidly quenched copper-based alloys was discussed, and inferred to be due to the formation of a percolation path of a superconducting lead or Pb-Bi phase along the grain boundaries, sub-boundaries and/or tangled dislocations where the lead or Pb-Bi phase precipitated preferentially, rather than the proximity effect based on lead or Pb-Bi particles.     

Sterols ofKalanchoe pinnata: First report of the isolation of both C-24 epimers of 24-alkyl-Δ25-sterols from a higher plant

Eighteen sterols were isolated from the aerial parts ofKalanchoe pinnata (Crassulaceae) including four novel sterols,viz. (24R)-stigmasta-5,25-dien-3β-ol (24-epiclerosterol), (24R)-5α-stigmasta-7,25-dien-3β-ol, 5α-stigmast-24-en-3β-ol, and 25-methyl-5α-ergost-24(28)-en-3β-ol. 24-Epiclerosterol and its Δ⁷-analog occur together with their 24S/β-epimers in the same plant making this the first report of the isolation of both C-24 epimers of Δ²⁵-unsaturated 24-alkylsterols from a non-marine organism. Iodine-catalyzed isomerization of stigmasta-5,24-dien-3β-ol (24-ethyldesmosterol), the main sterol ofK. pinnata, yielded 24-epiclerosterol among other products.     

Synthesis, structure and mechanical properties of Zr-Cu-based bulk metallic glass composites

The unusual glass-forming ability(GFA) of the Zr_(48)Cu_(36)Ag_8Al_8 alloy and the high ductility of the Zr_(48)Cu_(36)Ag_8Al_8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a diameter of 25 mm was successfully synthesized using copper mold casting for the Zr_(48)Cu_(36)Ag_8Al_8 alloy.High GFA of this alloy was found to be related to a large supercooled liquid region and a quaternary eutectic point with low melting temperature.The bulk metallic glass...     

Ultrahigh performance of Ti-based glassy alloy tube sensor for Coriolis mass flowmeter

Bulk metallic glasses （BMGs） have potential applications for both structural and functional components owing to their good mechanical properties. With the aim of demonstrating great engineering value of BMGs, a direct melt-forming technique based on suction casting for the production of glassy alloy tubes was developed. The fabrication, structure, geometry, properties and sensor performance of the tubes were examined. The results show that the Coriolis mass flowmeters using the Ti-based glassy alloy sensor tube exhibit excellent measurement sensitivity, viz. 28.5 times higher than that of the conventional flowmeter manufactured using stainless steel （SUS316） tube.     

Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass

Mechanical deformation of Pd₄₀Ni₄₀P₂₀ was characterized in compression over a wide strain rate range (3.3×10⁻⁵ to 2×10³ s⁻¹) at room temperature. The compression sample fractured with a shear plane inclined 42 degree with respect to the loading axis, in contrast to 56 degree for the case of tension. This suggests the yielding of the material deviates from the classical von Mises yield criterion, but follows the Mohr-Coulomb yield criterion. Fracture stress as well as strain was found to decrease with increasing applied strain rate. The compressive stress (1.74 GPa) was also found to be higher than the tensile fracture stress at a quasi-static strain rate. Close examination of the stress–strain curves revealed that localized shear might have occurred at a compressive stress of about 1.4 GPa, much lower than the “apparent” yield stress of 1.74 GPa. However, the stress of 1.4 GPa for shear band initiation is almost the same as the fracture stress measured at a dynamic strain rate of 5×10² s⁻¹. These results suggested that the fracture of a bulk metallic glass is sensitive to the applied loading rate.     

Mobility and Localization of Carriers in a Quasi-One-Dimensional Electron System over Liquid Helium

The properties of a quasi-one-dimensional (Q1D) electron system on liquid helium are considered and the experiments on the carrier transport are presented. It has been shown that the electron mobility changes from high values close to that for bulk helium to very small values as a function of the Q1D channel width. Such a behaviour of is connected to a gradual transition from the regime of the quasi-free movement of the carriers in a Q1D system to the conditions of strong localization of the electrons. In the last case depends on temperature exponentially with the activation energy of a few degrees. It is predicted that in Q1D channels in regime of the localization two optical plasmon branches can exist. One of them (a high frequency branch) is connected with the oscillations of electrons in potential wells and another one has lower frequency and is due to the oscillations of dimples, which are created by localized electrons on the liquid helium surface, in the potential wells. Possible new experiments on study of magnetotransport, plasma oscillations and phase diagram of ordered-disordered states in a Q1D electron system of a finite length over liquid helium are proposed and discussed.     

Lyapunov function-based obstacle avoidance scheme for a two-wheeled mobile robot

An obstacle avoidance scheme of a two-wheeled mobile robot is shown by selecting an appropriate Lya- punov function. When considering the obstacle, the Lyapunov function may have some local minima. A method which erases the local minima is proposed by using a function which covers the minima with a plane surface. The effectiveness of the proposed method is verified by numerical simulations.