Thermal Stability of Polymer Additives: Comparison of Decomposition Models Including Oxidative Pyrolysis

The thermo‐oxidative stability of widely used polymer additives has been investigated. A comparative analytical approach with classic and innovative decomposition models for polymer additives was conducted and the results supported using quantum‐chemical calculations. Unique pyrolysis products of the analytes were compiled utilizing pyrolysis online coupled to gas chromatography followed by mass spectrometric detection (Pyr‐GC–MS). The pyrolysis was either performed under inert conditions or in an oxygen‐containing atmosphere. Squalane was applied as polymer‐mimicking liquid next to low density polyethylene (LDPE) and polyamide 6 (PA 6) as matrices for 10 selected additives. The additives included in this study range from antioxidants and plasticizers to processing aids. These were selected to address a range of application in consumer products and to cover different chemical classes. The toxicological relevance of additives and potential breakdown products was considered. Consequently, degradation of sterically hindered antioxidants, diarylamines, and a trimellitic acid derivative was investigated. The findings were used to predict the behavior of consumer products made of polymeric materials entailing additives. The level of Antioxidant 2246 [2‐tert‐butyl‐6‐[(3‐tert‐butyl‐2‐hydroxy‐5‐methylphenyl)methyl]‐4‐methylphenol] and one of its predicted decomposition products was determined in baby bottle nipples made of natural rubber [2‐tert‐butyl‐4‐methylphenol] utilizing the complementary technique of gas chromatography coupled to tandem mass spectrometry (GC–MS/MS). This study provides a comprehensive characterization of important polymer additives and enables the prioritization of degradation products for further risk assessment. J. VINYL ADDIT. TECHNOL., 25:E12–E27, 2019. © 2018 The Authors. Journal of Vinyl and Additive Technology published by Wiley Periodicals, Inc. on behalf of Society of Plastics Engineers     

Scalability and performance of an agent‐based network management middleware

Rapid growth of computer network sizes and uses necessitate analysis of network application middleware in terms of its scalability as well as performance. In this paper we analyze a distributed network management middleware based on agents that can be dispatched to locations where they can execute close to the managed nodes. The described middleware operates between the network protocol layer and the application layer and uses standard TCP protocol and SNMP probes to interface the network. By aggregating requests from many users into a single agent, our system allows multiple managers to probe problem areas with minimal management traffic overhead. We discuss and quantify the benefits of the described middleware by implementing real‐time network managers using our system. The main result of this paper is a comparison of scalability and efficiency of our agent‐based management middleware and traditional SNMP‐based data collection. To this end, we measured traffic in both real and simulated networks. In the latter case, we designed, used and described here a method of separating simulated application flow into separate subflows to simplify design of simulations. Copyright © 2004 John Wiley & Sons, Ltd.     

HoxA is a transcriptional regulator for expression of the hup structural genes in free-living Bradyrhizobium japonicum

A chromosomally integrated Bradyrhizobium japonicum hoxA mutant is unable to oxidize hydrogen in free-living conditions. Derepressing conditions that induce hydrogenase activity in free-living, wild-type B. japonicum cells cannot induce expression of the hydrogenase structural genes in the hoxA mutant. The DNA-binding capacity of HoxA at the hup promoter region was studied by means of gel retardation. Both heterotrophically growing cells and cells induced to express hydrogenase activity contain a protein that specifically binds to the hup promoter region. Crude protein extracts isolated from a B. japonicum hoxA mutant do not contain this binding compound. The HoxA protein was overexpressed in E. coli and isolated in the form of a maltose-binding protein (MBP)-HoxA fusion. The MBP-HoxA hybrid protein specifically bound to a 50 bp region of the hupSL promoter known to be important for regulation of hupSL expression.     

On the computation of conjugacy classes of Chevalley groups

In this paper an algorithm is presented to determine the number of semisimple conjugacy classes for a given centralizertype for the Chevalley groupsSL _n(q) andSU _n(q). Moreover we give the exact number of regular semisimple classes of this groups and a summary of results on the generic classnumber of exceptional Chevalley groups of adjoint type.The first author acknowledges financial support by a grant of the Deutsche Forschungsgemeinschaft     

Hilfsmittel zum Auffinden einer ersten Gestalt beim methodischen Konstruieren: Gestaltbeeinflussung durch die Verwendung physikalischer Effekte

Zusammenfassung Ziel des Teilvorhabens, über das hier berichtet wird, was es, für eine Auswahl von physikalischen Effekten eine Zuordnung von gestaltbeeinflussenden Merkmalen auf sehr abstrakter Ebene zu erreichen und damit eine n?here Charakterisierung der Wirkfl?chen und Wirkr?ume zu erreichen die zur Umsetzung eines physikalischen Effektes notwendig sind. Die hieraus resultierenden Ergebnisse sind dem Abschlu?bericht zu entnehmen [1]. Weiterführende Themen, die basierend auf den vorliegenden Erkenntnissen bearbeitet werden, haben zum Ziel, die wesentlichen und entscheidenden Parameter einer Konstruktionsaufgabe zu erkennen und zukünftig zielgerichtet L?sungsvarianten zu erstellen, um somit für eine Neukonstruktion sinnvolle L?sungsfelder sehr frühzeitig abzugrenzen.     

ACAT inhibitors derived from hetero-Diels-Alder cycloadducts of thioaldehydes

Acyl-CoA:cholesterol acyltransferase (ACAT) is the enzyme largely responsible for intracellular cholesterol esterification. A systemic inhibitor of ACAT is believed to be able to slow or even reverse the atherosclerotic process. Towards that goal, a series of cyclic sulfides, derived from the hetero-Diels-Alder reaction of thioaldehydes with 1,3-dienes, and bearing carboxamide substituents, were prepared and evaluated for in vitro (in several tissues and species) and ex vivo ACAT inhibition. Minor changes in subsequent structure were found to have a significant effect in optimization of the biological activity of this series of compounds.     

Minimum spanning trees made easier via multi-objective optimization

Many real-world problems are multi-objective optimization problems and evolutionary algorithms are quite successful on such problems. Since the task is to compute or approximate the Pareto front, multi-objective optimization problems are considered as more difficult than single-objective problems. One should not forget that the fitness vector with respect to more than one objective contains more information that in principle can direct the search of evolutionary algorithms. Therefore, it is possible that a single-objective problem can be solved more efficiently via a generalized multi-objective model of the problem. That this is indeed the case is proved by investigating the computation of minimum spanning trees.This work was supported by the Deutsche Forschungsgemeinschaft (DFG) as part of the Collaborative Research Center Computational Intelligence (SFB 531) and by the German-Israeli Foundation (GIF) in the project Robustness Aspects of Algorithms.     

Microcalorimetry for characterization of film formation and cure of coatings and adhesives

A new microcalorimeter with eight parallel channels using robust, low cost sensors for characterization of coatings and adhesives is described and first experiments on coatings and adhesives are presented. The calorimetric sensors are based on thin glass plates (20 mm × 20 mm, thickness 150 μm) with heater and thermocouple sputtered on the surfaces (calorimetric active area of about 9 mm²). The setup allows heating and cooling experiments as well as isothermal measurements in the temperature-modulated mode with up to eight sensors in parallel. The measured quantities are the real (C^′_p) and imaginary part (C^″_p) of the complex heat capacity (), the related absolute value of the heat capacity () and the heat flow . An industrial computer (NI PXI system) with specific software for calibration and data recording controls the electronic components. Sensors can be embedded in a temperature controlled oven (heating and cooling by Peltier elements) or alternatively in a climatic cabinet with controlled temperature and humidity.

The method has been applied successfully to monitoring of film formation of aqueous polymer dispersions (styrene-acrylate copolymer) and curing of coatings.     

XPS investigation on AISI 420 stainless steel corrosion in oil and gas well environments

The corrosion behaviour of 13Cr-martensitic stainless steel (AISI 420) was investigated in CO₂-H₂S-Cl^– environments typical of oil and gas wells under different CO₂ and H₂S partial pressures. The corrosion tests indicated that the AISI 420 steel was highly corrosion resistant to CO₂-induced phenomena (general corrosion and carbonate S.C.C.), while in the H₂S environment a high S.S.C.C. (Sulphide Stress Corrosion Cracking) susceptibility and high corrosion rates were found. Moreover, CO₂ in CO₂-H₂S-Cl^– systems inhibited general corrosion and S.S.C.C. phenomena by favouring the formation of a protective film. By means of X-ray photoelectron spectroscopy (XPS) the chemical nature of the films grown on AISI 420 in different environmental conditions was investigated and the following statements were drawn out: