Random poly(ε‐caprolactone‐L‐alanine) by direct melt copolymerization

A series of random polyesteramides (PEAs) with a range of molar composition from 90/10 to 50/50 were synthesized by direct melt polycondensation of ε‐caprolactone and l ‐alanine. Their structure was fully characterized by Fourier transform IR and NMR spectroscopy. The resulting copolymers are completely amorphous with the exception of PEA‐90/10 which possesses a semicrystalline structure. These PEAs present increasing glass transition temperatures at increasing l ‐alanine contents and exhibit fairly good thermal stability with 10% mass loss temperatures reaching 315 °C. © 2020 Society of Industrial Chemistry     

Synthesis,structural and morphological characteristics,magnetic and optical properties of Co doped ZnO nanoparticles

Zn_1−xCo_xO (x==0.05, 0.10, 0.15) nanoparticles have been synthesized by an alternative wet-chemical synthesis route using the SimAdd technique. The as-obtained powders were investigated by FT-IR spectroscopy, X-ray diffraction and thermal analysis correlated with evolved gas analysis (TG–DTA–FT-IR) in order to determine their chemical nature, crystalline structure and to establish the decomposition sequences. The precipitates are generally amorphous, but low-intensity reflection peaks assigned both to the zinc oxalate dihydrate, and zinc hydroxide can be observed in the recorded patterns, indicating that hydroxy-oxalate precipitates were obtained. The structure, morphology and magnetic properties of the thermally treated samples have been investigated by X-ray diffraction, FT-IR, HRTEM, SAED, UV–vis and EPR. XRD studies reveal a hexagonal wurtzite-type structure for all Zn_1−xCo_xO samples. TEM investigations show particle size between 28 and 37 nm, with spherical and polyhedral shapes and with tendency to form aggregates. The presence of a Co₃O₄ secondary phase was evidenced by XRD, UV–vis and EPR for the Zn_0.85Co_0.15O sample. The ferromagnetic behavior of the samples was revealed. The paper highlights that by varying the cobalt concentration it is possible to modulate the structural, morphological, optical and magnetic properties.     

Novel Design of Neuropeptide-Based Drugs with β-Sheet Breaking Potential in Amyloid-Beta Cascade: Molecular and Structural Deciphers

Our work discusses the investigation of 75 peptide-based drugs with the potential ability to break the β-sheet structures of amyloid-beta peptides from senile plaques. Hence, this study offers a unique insight into the design of neuropeptide-based drugs with β-sheet breaker potential in the amyloid-beta cascade for Alzheimer’s disease (AD). We started with five peptides (¹⁵QKLVFF²⁰, ¹⁶KLVFF²⁰, ¹⁷LVFF²⁰, ¹⁶KLVF¹⁹ and ¹⁵QKLV¹⁸), to which 14 different organic acids were attached at the N-terminal. It was necessary to evaluate the physiochemical features of these sequences due to the biological correlation with our proposal. Hence, the preliminary analysis of different pharmacological features provided the necessary data to select the peptides with the best biocompatibility for administration purposes. Our approaches demonstrated that the peptides ¹⁷LVFF²⁰, NA-¹⁷LVFF²⁰, ¹⁶KLVF¹⁹ and NA-¹⁶KLVF¹⁹ (NA-nicotinic acid) have the ability to interfere with fibril formation and hence improve the neuro and cognitive functions. Moreover, the peptide conjugate NA-¹⁶KLVF¹⁹ possesses attractive pharmacological properties, demonstrated by in silico and in vitro studies. Tandem mass spectrometry showed no fragmentation for the spectra of ¹⁶KLVF¹⁹. Such important results suggest that under the action of protease, the peptide cleavage does not occur at all. Additionally, circular dichroism confirmed docking simulations and showed that NA-¹⁶KLVF¹⁹ may improve the β-sheet breaker mechanism, and thus the entanglement process of amyloid-beta peptides can be more effective.     

Superhydrophobic properties of cotton fabrics functionalized with ZnO by electroless deposition

Cotton fabrics were coated with arrays of ZnO hexagonal prisms using an electroless (catalytic/autocatalytic) deposition process. A typical three step method, similar to those used for electroless deposition of metals on insulating substrates, consisting of pre-activation, activation and deposition steps was employed. The low-dimensional ZnO particles were grown from an aqueous solution containing zinc nitrate as source of zinc ions and dimethylamineborane as reducing agent. The as-obtained ZnO-coated cotton fabrics were characterized from the point of view of structure by X-ray diffraction (XRD) and morphology by scanning electron microscopy (SEM). The XRD studies demonstrate that the ZnO particles have a hexagonal wurtzite crystalline structure. The SEM observations prove that the cotton fibers are homogeneously covered by hexagonal prisms which have uniform base size of approximately 500 nm and height of 1 μm. Optical spectroscopy measurements show that the functionalization with ZnO strongly decreases the transmittance in the UV–vis region of the cotton fabrics. An important characteristic is that the ZnO-functionalized cotton fabrics exhibit superhydrophobicity, with water contact angles exceeding 150°. The technique described is highly reproducible, easy scalable and cheap, allowing a wide range of applications.     

Secondary data — the Poor Relative of Business Continuity

Cable & Wireless Plc acquired Exodus on the 1st February 2002.You think you’ve got BCP covered because you take regular backups and store them safely off site and perhaps even encrypt them … Think again. There is a whole plethora of devices and programs that facilitate your users accessing that data after you have dutifully restored it from your backup medium of choice. These facilitators contain secondary data and this data needs backing up and security measures as well, otherwise your primary data will resemble a newly restored vintage car: great looks, but no leaded gasoline available to run on.     

Increase of regression speed of combustion through oxidizer doping

This paper presents an innovative method to increase the regression speed of a solid fuel grain by using oxidizer doping. The results obtained on a propulsion application showing the performance parameters as an output of a numerical model are provided. Two models are given that predict the regression speed increase for embedding wires and for oxidizer doping with a factor of ～2 to 3. Also, it is shown that this increase of the regression speed by using a low oxidizer doping percentage, which is based on the assumption that at a higher doping rate the combustion instabilities, can lead to detonations. Next, a thermochemical model for the combustion within the oxidizer doping model is afforded. For this model, the burn is assumed to take place around the surface of each of the oxidizer particles, being composed of two different burning processes: one is the burning on the surface of the solid fuel grain and the other is the burning between the solid fuel and the solid oxidizer. For a non-doped fuel grain, the burning takes place only on the surface of the fuel grain. Finally, a potential application of such propulsion units to small satellite launchers is presented, and a case study of such a vehicle intended to place a 50 kg payload on a low earth orbit (300 to 500 km altitude) is described. The modelling proposed is based on the assumption that the use of solid methane makes this launcher environmentally friendly.     

Properties of anodic oxides grown on a hafnium–tantalum–titanium thin film library

A ternary thin film combinatorial materials library of the valve metal system Hf–Ta–Ti obtained by co-sputtering was studied. The microstructural and crystallographic analysis of the obtained compositions revealed a crystalline and textured surface, with the exception of compositions with Ta concentration above 48 at.% which are amorphous and show a flat surface. Electrochemical anodization of the composition spread thin films was used for analysing the growth of the mixed surface oxides. Oxide formation factors, obtained from the potentiodynamic anodization curves, as well as the dielectric constants and electrical resistances, obtained from electrochemical impedance spectroscopy, were mapped along two dimensions of the library using a scanning droplet cell microscope. The semiconducting properties of the anodic oxides were mapped using Mott–Schottky analysis. The degree of oxide mixing was analysed qualitatively using x-ray photoelectron spectroscopy depth profiling. A quantitative analysis of the surface oxides was performed and correlated to the as-deposited metal thin film compositions. In the concurrent transport of the three metal cations during oxide growth a clear speed order of Ti > Hf > Ta was proven.     

Corrosion behavior of Cu–SiO<Subscript>2</Subscript> nanocomposite coatings obtained by electrodeposition in the presence of cetyl trimethyl ammonium bromide

Copper silica composite coatings are an attractive alternative to chromium and nickel coatings in order to avoid environmental problems and for application in electrical devices. However, co-deposition of SiO₂ particles with metals occurs to a rather limited extent, generally under 1%, due to the hydrophilicity of SiO₂, which makes the incorporation of particles in a metallic matrix difficult. To overcome this drawback, the influence of cetyl trimethyl ammonium bromide (CTAB) on the deposition and corrosion behavior of Cu–SiO₂ coatings on steel has been studied. It was established that CTAB plays a beneficial role in SiO₂ suspension stabilization, promotes the co-deposition of nanoparticles in the copper matrix and improves the deposit morphology and structure. Consequently, a higher corrosion resistance of Cu–SiO₂ deposits obtained in the presence of CTAB was noticed. The most important effect was observed in the case when CTAB was used in concentration of 10⁻³ M in the electroplating bath.