Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

Mixture ratio modeling of dynamic systems

Any knowledge extraction relies (possibly implicitly) on a hypothesis about the modelled-data dependence. The extracted knowledge ultimately serves to a decision-making (DM). DM always faces uncertainty and this makes probabilistic modelling adequate. The inspected black-box modeling deals with “universal” approximators of the relevant probabilistic model. Finite mixtures with components in the exponential family are often exploited. Their attractiveness stems from their flexibility, the cluster interpretability of components and the existence of algorithms for processing high-dimensional data streams. They are even used in dynamic cases with mutually dependent data records while regression and auto-regression mixture components serve to the dependence modeling. These dynamic models, however, mostly assume data-independent component weights, that is, memoryless transitions between dynamic mixture components. Such mixtures are not universal approximators of dynamic probabilistic models. Formally, this follows from the fact that the set of finite probabilistic mixtures is not closed with respect to the conditioning, which is the key estimation and predictive operation. The paper overcomes this drawback by using ratios of finite mixtures as universally approximating dynamic parametric models. The paper motivates them, elaborates their approximate Bayesian recursive estimation and reveals their application potential.     

Imaging of two-dimensional unsaturated moisture flows in uncracked and cracked cement-based materials using electrical capacitance tomography

The development of visualizing tools to monitor unsaturated moisture flow in cement-based materials is of great importance, as most degradation processes in cement-based materials are connected to and take place in the presence moisture. This paper investigates the ability of electrical capacitance tomography (ECT) to image two-dimensional (2D) unsaturated moisture flow in cement-based materials. In ECT, the electrical permittivity distribution within an object is reconstructed based on measured capacitances between electrodes attached on the object’s surface. In a series of experiments, mortar specimens with and without discrete cracks were imaged with ECT during a 2D moisture ingress. The results show that ECT is able to monitor the evolution of the moisture flow, and to approximate the shape and position of the moisture front. These findings indicate that ECT is a viable method for monitoring and visualizing 2D unsaturated moisture flow in cement-based materials in the presence and absence of discrete cracks.     

Temperament in Childhood Predicts Body Mass in Adulthood: The Cardiovascular Risk in Young Finns Study.

This study examined associations of temperament at ages 6 to 12 with body-mass index (BMI) and waist circumference (WC) at ages 24 to 30 years. The participants were 619 men and women derived from the population-based Cardiovascular Risk in Young Finns Study. Temperament was operationalized as (negative) emotionality, sociability, and activity. High emotionality predicted increased BMI, independently of WC, and independently of childhood and adulthood risk factors for adult obesity. None of the temperament dimensions had any associations with WC after controlling for BMI. The findings suggest that temperamental difficulty in childhood may be a useful risk indicator for general body mass in adulthood, and the mechanisms relating temperament with body mass should be further explored. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Multivariate Analysis of Finnish Dialect Data An Overview of Lexical Variation

During the process of writing a comprehensive dictionary ofFinnish dialects, a large set of maps describing the regionaldistribution of the dialect words have been compiled in electronicform. In this article, we set out to analyse this corpus ofdata in order to gain new insight on the variation of Finnishdialects. We use a wide range of multivariate data analysismethods, including principal components analysis, independentcomponents analysis, clustering, and multidimensional scaling.We explain how to preprocess the data to overcome the problemof uneven sampling caused by the way the data has been collected.We discuss the results obtained by these methods and comparethem to the traditional view of Finnish dialect groups.     

A survey of nitrate and nitrite content of fruit and vegetables grown in Slovenia during 1996-2002

Monitoring of nitrate (NO₃^-) and nitrite (NO₂^-) content in agricultural products in Slovenia has been carried out since 1996. The results of monitoring over the period 1996-2002 are presented. During this time 924 samples of 14 different agricultural products (potato, lettuce, apples, carrot, silage maize, cabbage, grapes, peaches, string beans, cereals, pears, cucumbers, strawberries and tomato) were analysed. The samples were taken at the time of maturity directly from growing sites and they were analysed using segmented flow analysis. The average nitrate contents were the highest in lettuce (1074 mg kg^-1), cabbage (881 mg kg^-1), string beans (298 mg kg^-1) and carrot (264 mg kg^-1), and they were moderately high in potato (158 mg kg^-1), silage maize (122 mg kg^-1), strawberries (94 mg kg^-1), cucumbers (93 mg kg^-1) and cereals (49 mg kg^-1). Low nitrate contents (below 6 mg kg^-1) were found in fruit (grapes, peaches, apples and pears) and tomato. With the exception of cereals (8.9 mg kg^-1), apples (1.5 mg kg^-1), potato (1.2 mg kg^-1) and pears (1.0 mg kg^-1) the content of nitrites did not exceed 0.5 mg kg^-1. It may be concluded that the results of the monitoring were in most cases similar to the results of investigations obtained in other countries.     

Einsatz von alternativen Reaktionsmedien für eine umweltverträglichere chemische Produktion

Use of alternative reaction media for an environmentally safer chemical production. The way in which a chemical reaction is carried out and the composition of the reaction mixture diotate the degree of difficulty of downstream processing operations, not only in terms of energy consumption but also with respect to environmental pollution. A specific environmental protection that is an integral part of the production process must therefore begin with the examination of the chemical rection step. Restructuring a process from a reaction engineering point of view includes two important aspects of which the technical implementation has not yet been systematically examined and which therefore should promise a significant potential for innovation. These are the integration of modern separation operations in the chemical reactor with the aim of shifting the chemical equilibrium and the choice of an alternative reaction medium; although the latter also serves the same purpose, it can bring about a significant reduction in environmental pollution. This aspect is the focus of this paper, in which the advantages of molten salts, supercritical fluids and microemulsions as alternative reaction media are discussed.     

Parallelizable split-operator propagator for treating Coriolis-coupled quantum dynamics

We show that the split-operator propagator of Feit and Fleck can be converted into a form that is easy to parallelize for a quantum system with Coriolis-coupled quantum dynamics. The angular kinetic energy part of the propagator is replaced by the Crank-Nicholson approximation, which makes the entire propagator tridiagonal in the quantum number Ω (the projection of the total angular momentum quantum number J onto the intermolecular axis). We demonstrate that the modified propagator is numerically stable and accurate, provided that the Crank-Nicholson approximation is applied to the entire angular kinetic energy operator.     

Modification of phenol–formaldehyde resol resins by lignin,starch, and urea

Lignin‐based chemicals, starch, and urea were used as modifiers for phenol–formaldehyde resol resins. The effects of the addition stage of the modifiers used in the synthesis of the resins and the type of modification reagent on the structures of the resins and their molar masses and reactivities were investigated. The modifications with corn starch and lignin promoted condensation; this was verified by increased molar masses and high ratios of methylene bridges to the sum of free ortho and para aromatic groups with respect to the corresponding reference resin without a modification reagent. The later the modifier was added to the resin condensation mixture, the more methylene bridges were formed with respect to the amounts of free ortho and para aromatic groups. In addition, when urea or wheat starch was added in the later condensation stage, the final condensation also reached high stages. The modifications with lignosulfonate and starch, as well as the early addition of urea, enhanced p–p′ bridge structures. The lowest condensation stage and, therefore, the highest reactivity were found when wheat starch was added with the starting reagents. The curing heat of the wheat‐starch‐modified resins decreased according to the deferred addition point of starch. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 582–588, 2003