Influence of Cu<Superscript>2+</Superscript> ions on structural and magnetic properties of NiZn ferrites

The paper is devoted to the preparation of NiZn ferrite with small substitutions of copper by means of ceramic technology. The influence of small Cu substitution on the microstructural and magnetic properties of NiZn ferrites have been analysed by means of various experimental methods and interpreted from the point of view of preparation technology optimisation and possible applications of such materials. A strong correlation between the substituent content and resulting properties has been observed, thus allowing preparation of material with the properties tailored for any particular application.     

Autoxidation of Hydrocarbons: From Chemistry to Catalysis

This contribution summarizes our recent efforts to unravel the radical chemistry of autoxidations. Abstraction of the weakly bonded αH-atom of the primary hydroperoxide product by chain carrying peroxyl radicals is identified as the source of major end products such as alcohol and ketone/aldehyde. In the case of cyclohexane autoxidation, this reaction is even responsible for the majority of ring-opened by-products. In a second part, different approaches to autoxidation catalysis are discussed, ranging from transition metal ion catalysis to organocatalysis with immobilized N-hydroxyphthalimide.     

Taste recognition threshold concentrations of styrene in oil-in-water emulsions and yoghurts

Taste recognition threshold concentrations (TRTC) of styrene were determined in samples of oil-in-water emulsions (30–300 g kg^?1 oil) and yoghurts (1–30 g kg^?1 fat), spiked with styrene. The observed TRTC increased linearly with increasing fat content and ranged from 0–3 to 2–1 mg kg^?1 for the emulsions and from 36 to 171 g kg^?1 for the yoghurts. Styrene equilibrium partition coefficients between emulsions and their respective vapour phases were determined. The concentrations of styrene in the continuous aqueous phase of the emulsions and yoghurts were calculated at the TRTC. The styrene concentrations in the continuous phase had constant values of about 15 g kg^?1 indicating that perception of styrene for oil-in–water emulsions is determined by the aqueous phase of the emulsion. The concentrations of styrene in the vapor phases above the emulsions and yoghurts were also calculated and were found to be constant at the TRTC. This relationship probably resulted from the equilibrium of distribution of styrene between the respective phases. Commercial yoghurt packed in polystyrene beakers contained styrene levels in the range 2–11 g kg^?1, much lower then the TRTC reported.     

Fast Recognition of Fibonacci Cubes

Fibonacci cubes are induced subgraphs of hypercubes based on Fibonacci strings. They were introduced to represent interconnection networks as an alternative to the hypercube networks. We derive a characterization of Fibonacci cubes founded on the concept of resonance graphs. The characterization is the basis for an algorithm which recognizes these graphs in O(mlog n) time. A. Vesel supported by the Ministry of Science of Slovenia under the grant 0101-P-297.     

Correction to: “SPOCU”: scaled polynomial constant unit activation function

Neural Computing and Applications - Addendum on SPOCU fitting and Erratum.     

Further study on the one-pot synthesis of (E)-2-nonenal from castor oil

A one-step procedure is described for the synthesis of (E)-2-nonenal from commercial castor oil by ozonolysis in methanol, followed by reduction of the ozonide products with dimethyl sulfide and exposure of the resulting intermediate product to dilute sulfuric acid. The developed process allows the production of the aldehyde with a yield of 80% at a purity of 95%. The method has advantages over all those reported earlier, because of inexpensive raw material and reducing agent, recycling of the solvent and its unusual simplicity.     

Property-composition relationships for diesel and kerosene fuels

A range of 18 diesel fuels and 21 kerosene fuels from mainly Australian petroleum and synthetic fuel sources, including coal, shale and peat, was investigated. Compositional details were defined as the weight per cent abundances of n-alkanes, branched plus cyclic saturates, single-ring aromatics, doublering aromatics and polynuclear aromatics, using both h.p.l.c. and ¹³C n.m.r. techniques. Relationships between fuel composition and a range of fuel properties were sought. Simple linear relationships between property values and compositional data were used. Explicit correlative expressions were derived using multiple linear regression analysis, with the coefficient of multiple determination, R², indicating the quality of the fit between observed and calculated property values. In most cases good correlations were achieved. For diesels the properties investigated, with R² values in parentheses, were: inverse specific gravity (0.99); ¹³C n.m.r. aromaticity (0.99); ¹H n.m.r. aromaticity (0.88); cetane index (0.97); aniline point (0.96); diesel index (0.98); and FIA-measured aromatics content (0.77). For kerosenes the properties, with R² values in parentheses, were: ¹³C n.m.r. aromaticity (0.98); ¹H n.m.r. aromaticity (0.97); smoke point (0.88); and FIA-measured aromatics content (0.94). The results are shown to be of value in assessing the potential and limitations of hydrotreating as a process for upgrading synfuels.     

Cross-property connections for copper–graphite composites

Copper–graphite composite materials in the range of 0–10 vol% of carbon phase were prepared from the mixture of copper and graphite powders by hot isostatic pressing. The microstructure, mechanical (tensile strength, elongation to fracture) and physical (electrical and thermal conductivity) properties of composite samples were investigated, and the cross-property connections were calculated. It was shown that electrical and thermal conductivity cross-property (Lorenz number) is almost constant and increases only slightly (no more than 10 % increase was observed). This implies that in the investigated composition range the Lorenz number of a copper–graphite composite system behaves according to Franz–Wiedemann law for pure metals at constant temperature. On the contrary, the conductivity to tensile strength cross-property connections showed significant linear increase (over 200 % in the investigated composition range) for both electrical conductivity and thermal conductivity of composite materials. The cross-property connections of conductivity to the elongation to fracture exhibit a nonlinear dependence on the volume fraction of graphite.     

Online bin stretching with three bins

Online bin stretching is a semi-online variant of bin packing in which the algorithm has to use the same number of bins as an optimal packing, but is allowed to slightly overpack the bins. The goal is to minimize the amount of overpacking, i.e., the maximum size packed into any bin. We give an algorithm for online bin stretching with a stretching factor of \(11/8 = 1.375\) for three bins. Additionally, we present a lower bound of \(45/33 = 1.\overline{36}\) for online bin stretching on three bins and a lower bound of 19/14 for four and five bins that were discovered using a computer search.