Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Performance evaluation of an importance sampling technique in a Jackson network

Importance sampling is a technique that is commonly used to speed up Monte Carlo simulation of rare events. However, little is known regarding the design of efficient importance sampling algorithms in the context of queueing networks. The standard approach, which simulates the system using an a priori fixed change of measure suggested by large deviation analysis, has been shown to fail in even the simplest network settings. Estimating probabilities associated with rare events has been a topic of great importance in queueing theory, and in applied probability at large. In this article, we analyse the performance of an importance sampling estimator for a rare event probability in a Jackson network. This article carries out strict deadlines to a two-node Jackson network with feedback whose arrival and service rates are modulated by an exogenous finite state Markov process. We have estimated the probability of network blocking for various sets of parameters, and also the probability of missing the deadline of customers for different loads and deadlines. We have finally shown that the probability of total population overflow may be affected by various deadline values, service rates and arrival rates.     

Second Sound Measurements Near the Tricritical Point in 3He-4He Mixtures

In this paper we discuss a pulsed second sound experiment, aimed at determining accurately the critical exponent , and the predicted logarithmic correction to scaling, for the superfluid density along a tricritical path in the ³ He- ⁴ He phase diagram. We present an accurate estimate for the limits for closest approach to the tricritical point, as set by gravitationally induced sample inhomogeneities and finite size effects, and discuss some of the complications associated with measurements close to the tricritical point.     

Application of ion-engineered Persian Gulf seawater in EOR:effects of different ions on interfacial tension,contact angle,zeta potential,and oil recovery

In this study,we initially performed interfacial tension(IFT)tests to investigate the potential of using the Persian Gulf sea-water(PGSW)as smart water with dif...     

Wettability alteration and retention of mixed polymer-grafted silica nanoparticles onto oil-wet porous medium

Enhanced oil recovery(EOR)processes are applied to recover trapped or residual oil in the reservoir rocks after primary and secondary recovery methods.Changing ...     

Task scheduling mechanisms in cloud computing: A systematic review

Today, cloud computing has developed as one of the important emergent technologies in communication and Internet. It offers on demand, pay per use access to infrastructure, platforms, and applications. Due to the increase in its popularity, the huge number of requests need to be handled in an efficient manner. Task scheduling as one of the challenges in the cloud computing supports the requests for assigning a particular resource so as to perform effectively. In the resource management, task scheduling is performed where there is the dependency between tasks. Many approaches and case studies have been developed for the scheduling of these tasks. Up to now, a systematic literature review (SLR) has not been presented to discover and evaluate the task scheduling approaches in the cloud computing environment. To overcome, this paper presents an SLR‐based analysis on the task scheduling approaches that classify into (a) single cloud environments that evaluate cost‐aware, energy‐aware, multi‐objective, and QoS‐aware approaches in task scheduling; (b) multicloud environment that evaluates cost‐aware, multi‐objective, and QoS‐aware task scheduling; and (c) mobile cloud environment that is energy‐aware and QoS‐aware task scheduling. The analytical discussions are provided to show the advantages and limitations of the existing approaches.     

High speed,low power VLSI CMOS vision sensor for geometric centre object tracking

In this article an object tracking CMOS sensor is presented. The architecture incorporates photo detection devices and pixel level processing elements for capturing and processing the image data and extracting the object's coordinates. The edges of the image scene are extracted by in-pixel edge detectors and the region (object) of interest, selected by the user, is segmented using a switch network. Coordinates of the desired region are obtained by extracting the geometric centre of the region. Tracking of the selected object is then performed by automatic reselection of the region using the updated coordinates. The proposed design presents less sensitivity to threshold adjustments than binarisation techniques. The sensor has been designed as a 64 × 64 pixel VLSI CMOS chip in the 0.35 μm standard CMOS technology. The proposed structure is analysed with regard to its operation in the presence of mismatches and noise. Features of the sensor are reported and compared with some previous object tracking designs. Because the power dissipation is small, the chip is ideal for low-power applications.     

Synthesis hydrophilic hybrid nanoparticles and its application in wettability alteration of oil-wet carbonate rock reservoir

In this study, synthesized SiO₂/ZnO hybrid nanoparticles were used to change the wettability of carbonate rock from highly oil-wet to strongly water-wet state. The SiO₂/ZnO nanoparticles were synthesized by modified sol-gel method. In this method, TEOS was used to increase the functional groups on the surface of the ZnO nanoparticles to produce highly hydrophilic nanoparticles. The contact angle measurements were conducted on the rock surface before and after nano-treatment. The contact angle of oil droplet with the rock changed from 0° to 150°, 161°, 164° and 170° after impregnation the rock with 0.01, 0.033, 0.07 and 0.33 wt.% nanofluids.     

Pulsed Laser Deposition of Photoresponsive Two‐Dimensional GaSe Nanosheet Networks

Synthesis of functional metal chalcogenide (GaSe) nanosheet networks by stoichiometric transfer of laser‐vaporized material from bulk GaSe targets is presented. Uniform coverage of interconnected, crystalline, and photoresponsive GaSe nanosheets in both in‐plane and out‐of‐plane orientations are achieved under different ablation conditions. The propagation of the laser‐vaporized material is characterized by in situ ICCD‐imaging. High (1 Torr) Ar background gas pressure is found to be crucial for the stoichiometric growth of GaSe nanosheet networks. Individual 1–3 layer GaSe triangular nanosheets of ≈200 nm domain size are formed within 30 laser pulses, coalescing to form nanosheet networks in as few as 100 laser pulses. The thickness of the deposited networks increases linearly with pulse number, adding layers in a two‐dimensional (2D) growth mode. GaSe nanosheet networks show p‐type semiconducting characteristics with mobilities reaching as high as 0.1 cm²V^?1s^?1. Spectrally‐resolved photoresponsivities and external quantum efficiencies range from 0.4 AW^?1 and 100% at 700 nm, to 1.4 AW^?1 and 600% at 240 nm, respectively. Pulsed laser deposition under these conditions appears to provide a versatile and rapid approach to stoichiometrically transfer and deposit functional networks of 2D nanosheets with digital thickness control and uniformity for a variety of applications.