Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

The impact of roasting on the ochratoxin A content of coffee

Roasting coffee led to a drop in the ochratoxin A (OTA) concentration, as measured by the reference method, especially for dark type roasts. The way the beverage was prepared also affected the OTA content, which could paradoxically be higher than that of the initial roasted coffee. Assays on the thermal stability of pure OTA showed that it ought to be found in larger quantities in roasted coffee. This suggested that OTA was masked by reactions with the substrate during roasting. The absence of OTA in green coffee is therefore the best guarantee of safety.     

Modelling diffusion and adsorption of As species in Fe/GAC adsorbent beds

BACKGROUND: Arsenic decontamination of drinking water by adsorption is a simple and robust operation. When designing packed bed adsorbers for arsenic, the main problems are the slow diffusion kinetics of As in microporous media and the lack of simple equations for predicting the performance of the equipment. Commercial iron‐doped granular activated carbon adsorbents (Fe/GAC) for groundwater arsenic abatement were studied in this work. Basic parameters for arsenate (As^V) adsorption were measured and their performance at larger scale was simulated with an approximate analytical model. RESULTS: In the 0–300 µg_As L^?1 range, the As^V adsorption isotherm on Fe/GAC was found to be approximately linear. Assuming Henry's law for adsorption and homogeneous surface diffusion with constant diffusivity for intrapellet mass transfer, an approximate model for flow and adsorption of arsenate inside packed bed adsorbers was developed, and reduced to an analytic compact solution using the quasi‐lognormal distribution (Q‐LND) approximation. The use of this model with fitted and reported parameters enabled the approximate simulation of industrial adsorbers and home point‐of‐use filters. Results show that industrial adsorbers meet the breakthrough condition with incomplete utilization of the adsorbent unless convenient process configurations are used. In point‐of‐use systems with short residence times intraparticle diffusion would drastically reduce the adsorbent performance. CONCLUSION: Assuming linear adsorption of As^V over Fe/GAC, an analytical approximate solution for flow and adsorption in packed beds can be obtained. The model seems to represent correctly the main features of industrial and home filters, however, more experimental data is necessary for scale‐up purposes. Copyright © 2011 Society of Chemical Industry     

Polyaniline‐modified cellulose nanofibrils as reinforcement of a smart polyurethane

Segmented polyurethanes exhibiting shape memory properties were modified by the addition of polyaniline (PANI)‐coated cellulose nanofibrils (CNFs). The two‐phase structure of the polymer is responsible for the material's ability to ‘remember’ and autonomously recover its original shape after being deformed in response to an external thermal stimulus. PANI was grown on the surface of the CNFs via in situ polymerization. Modified nanocrystals were added to the segmented polyurethane in concentrations ranging from 0 to 15 wt%. The changes in the material properties associated with the percolation of the coated fibrils appear at higher concentrations than previously observed for non‐modified CNFs, which suggests that fibril agglomeration is occurring due to the PANI coating. The shape memory behavior of the composites is maintained at about the same level as that of the unfilled polyurethane only up to 4 wt% of fibrils. At higher concentrations, the rigidity of the nanofibrils as well as their interaction with the hard‐segment phase and the increasing difficulty of dispersing them in the polymer collaborate to produce early breakage of the specimens when stretched at temperatures above the melting point of the soft segments. Copyright © 2010 Society of Chemical Industry     

Can Brazil replace 5% of the 2025 gasoline world demand with ethanol?

Increasing use of petroleum, coupled with concern for global warming, demands the development and institution of CO₂ reducing, non-fossil fuel-based alternative energy-generating strategies. Ethanol is a potential alternative, particularly when produced in a sustainable way as is envisioned for sugarcane in Brazil. We consider the expansion of sugarcane-derived ethanol to displace 5% of projected gasoline use worldwide in 2025. With existing technology, 21 million hectares of land will be required to produce the necessary ethanol. This is less than 7% of current Brazilian agricultural land and equivalent to current soybean land use. New production lands come from pasture made available through improving pasture management in the cattle industry. With the continued introduction of new cane varieties (annual yield increases of about 1.6%) and new ethanol production technologies, namely the hydrolysis of bagasse to sugars for ethanol production and sugarcane trash collection providing renewable process energy production, this could reduce these modest land requirements by 29–38%.     

Mental health professionals' adaptive responses to racial microaggressions: An exploratory study.

This study examines adaptive responses that mental health professionals of color use to cope with racial microaggressions in their professional lives. Twenty-four mental health professionals from diverse ethnic backgrounds in the United States and Canada participated in focus groups discussing their experiences with racial microagressions and how they cope with them. Results of the analysis indicated that 8 primary coping themes illustrated strategies used by the participants. These include: identifying key issues in responding to racial microaggressions, self-care, spirituality, confrontation, support, documentation, mentoring, and collective organizing. Suggestions for mentoring professionals of color are offered. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nachgiebiger Elektrodenträger für Cochlea-Implantate mit fluidischer Aktuierung

The cochlear implant, consisting of a compliant electrode carrier (ET) and embedded electrodes with contact wires, is an auditory neuroprosthesis, which is surgically inserted into the inner ear (cochlea) in order to create an auditory impression in the hearing-impaired patients. For simplification of the insertion, a fluidically actuated electrode carrier with a changeable curvature is presented. The deformation of the ET is specifically manipulated by applying pressure to its interior and also by a non-stretchable thin fibre or stripe embedded in its wall. An analytical examination of scaling properties allows to use scaled structures for models and measurements. In order to determine the geometry of the ET, a model-based synthesis – FE method combined with analytical modelling – is carried out. The synthesis resulted in a conical shape of the ET with a cylindrical cavity closed at one end and a fiber running parallel to the cavity. Experimental studies on a measuring geometry show a maximum deviation of 0,6 bar at a maximum internal pressure of 6 bar. The investigations show that the proposed synthesis method is suitable for the development of surgical instruments with adjustable curvature.     

Waterpipe smoking: construction and validation of the Lebanon Waterpipe Dependence Scale (LWDS-11).

Waterpipe smoking is becoming fashionable in Lebanon, but no studies have studied nicotine dependence related to waterpipe smoking. A score was constructed from 21 items and subsequently submitted to two factor analyses, which led to the extraction of four factors. Reliability and test-retest reproducibility were measured. Convergent construct validity and discriminant validity also were assessed for different smokers' samples. The Lebanon Waterpipe Dependence Scale-11 (LWDS-11) was composed of four subscales, the first representing nicotine dependence, the second negative reinforcement, the third psychological craving, and the fourth positive reinforcement. Internal consistency and test-retest reproducibility were adequate, and the subscales correlated adequately with measurements of nicotine metabolites, exhaled carbon monoxide levels, and the frequency of waterpipe smoking. The LWDS-11 discriminated between mild, moderate, and heavy waterpipe smokers, based on a threshold score of 10. Results were biologically and psychologically sound. This is the first scale to characterize waterpipe dependence. With further improvement and confirmation, it could become a useful clinical and epidemiological tool.     

Diosgenin quantification,characterisation and chemical composition in a tuber collection of Dioscorea spp. in the state of Jalisco,Mexico

Dioscorea spp. tubers are known commonly as camote de cerro to the state of Jalisco, México. Besides its use as food, it contains diosgenin, a raw material used widely for synthesising steroid hormones. The purpose of the present research was to determine diosgenin contents by gas chromatography‐mass spectrometry (GC‐MS), as well as physical and chemical characteristics of sixty Dioscorea spp. accessions cultivated in mesh shade coming from eleven localities in the state of Jalisco. Extraction protocol for diosgenin was maceration combined with ethanol 80%. Significant statistical differences for diosgenin content were found between accessions, finding levels between 0.02 and 0.16 mg kg^?1 in dry basis. Length, weight tuber, proportion pulp/skin, percentage of pulp and percentage of skin showed significant differences. Chemical composition based in fresh weight presented in moisture percentage a range of 71.93–83.26%, crude protein 1.42–1.74%, ashes 0.80–1.16%, lipid 0.13–0.17%, crude fibre 3.80–4.02% and total carbohydrates 13.97–25.44%. Results show that tubers from Jalisco can be an important source of nutrients for consumers.