Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

Miscibility of oligomeric poly(dimethyl siloxanes) with long-chain unbranched alkanes: 2. Unsymmetrical cloud point curves

Previously obtained cloud point curves for mixtures of oligomeric poly(dimethyl siloxanes) (weight fraction W₁) with oligomeric polyethylenes have been supplemented by the use of samples of higher molecular weight. Initial flat regions at low-medium W₁ as well as a slight shoulder at extremely high W₁ are now considered to be due to crystallization, since the temperatures at which they occur are the melting points of the oligoethylenes. The actual cloud point curves were of an unsymmetrical dome shape, the form of which could not be simulated by using a concentration-independent interaction parameter g in the Flory-Huggins equation. However, spinodals calculated by assuming a quadratic dependence of g on composition were of the same shape as the experimental cloud point curves. The critical compositions calculated on this basis were also close to the experimental ones.     

Characterising and exploiting workloads of highly interactive video-on-demand

This paper presents a detailed characterisation of user behaviour for a series of interactive video experiments over a 12 month period, in which we served popular sporting and musical content. In addition to generic VCR-like features, our custom-built video-on-demand application provides advanced interactivity features such as bookmarking. The dramatic impact of such functionality on how users consume content is studied and analysed. We discuss in detail how this user behaviour can be exploited by content distributors to improve user experience. Specifically, we study how simple dynamic bookmark placement and interactivity-aware content pre-fetching and replication can reduce the impact of highly interactive media on CDN performance.     

An atomic force microscope study of surface roughness of thin silicon films deposited on SiO/sub 2/

Atomic force microscope analysis, with a resolution of /spl lsim/1.1 nm, shows that peak-to-peak surface roughness (/spl Delta/h/sub p-p/) of amorphous silicon films thinner than /spl ap/50 nm on silicon dioxide can be controlled to better than 5 nm. Low-pressure, chemically-vapor-deposited silicon films on silicon dioxide initially show an approximately linear increase in the surface roughness due to growing nuclei as the deposition progresses, followed by a decrease in the surface roughness as growth nuclei coalesce. A simple model based on random nucleation and nuclei growth displays similar trends. Films deposited on rougher substrates show more surface roughness. Surface treatment during the predeposition cleaning process does not significantly affect /spl Delta/h/sub p-p/. As a means of producing smooth surfaces, films thinner than about 20 nm are first deposited more thickly than needed, and then etched back to the desired dimension; the use of a binary HNO/sub 3/ and HF etching process improves roughness control. Boron-ion implanted and subsequently crystallized 45-nm-thick Si films show significant smoothing with /spl Delta/h/sub p-p//spl ap/2.2 nm. Thin amorphous silicon films deposited by source evaporation are attractive because they can be deposited at room temperature, and have smoother surfaces (/spl Delta/h/sub p-p//spl ap/2.5 nm) than comparable films produced by chemical vapor deposition.     

Hybrid model of content extraction

We present a hybrid model for content extraction from HTML documents. The model operates on Document Object Model (DOM) tree of the corresponding HTML document. It evaluates each tree node and associated statistical features like link density and text distribution across the node to predict significance of the node towards overall content provided by the document. Once significance of the nodes is determined, the formatting characteristics like fonts, styles and the position of the nodes are evaluated to identify the nodes with similar formatting as compared to the significant nodes. The proposed hybrid model is derived from two different models, i.e., one is based on statistical features and other on formatting characteristics and achieved the best accuracy. We describe the validity of model with the help of experiments conducted on the standard data sets. The results revealed that the proposed model outperformed other existing content extraction models. We present a browser based implementation of the proposed model as proof of concept and compare the implementation strategy with various state of art implementations. We also discuss various applications of the proposed model with special emphasis on open source intelligence.     

Group SkSP-R sampling plan for accelerated life tests

This study presents a group skip-lot sampling plan using resampling (SkSP-R) for accelerated life tests. It is assumed that the lifetime of a product follows Weibull distribution with known shape parameter under the use condition, while the scale parameter can be obtained from acceleration factor. The plan parameters are determined through a non-linear optimisation problem for fixed values of producer’s risk and consumer’s risk. The advantages of the proposed plan over the existing one are explained with some practical examples.     

Production planning in automotive powertrain plants: a case study

Based on a real case study from the automotive industry, this paper deals with production planning in powertrain plants. We present an overview of the production planning process and propose a mixed integer linear programme to determine the production quantities of each product over a planning horizon of several days. Then, using real data of an engine assembly line, we simulate the performance obtained through the proposed model within a rolling horizon planning process. We perform multiple tests in order to evaluate the impact of two parameters involved in this process: planning frequency and frozen horizon length. Furthermore, in order to illustrate the value of improving coordination between engine plants and their customers, we evaluate the impact of the quality of demand information (orders and forecasts). We analyse the simulation results and provide insights and recommendations in order to achieve a good trade-off between service level, inventory, and planning stability.