Alumina-supported catalysts for propane oxidative dehydrogenation from mixed VXM(6−X)O19 (M=W, Mo) hexametalate precursors

γ-Al₂O₃ supported vanadium oxides were modified by tungsten and molybdenum oxides in order to improve dispersion and selectivity towards olefins in propane oxidative dehydrogenation (ODH). Both vanadium–tungsten and vanadium–molybdenum catalysts were obtained by adsorption of mixed isopolyanions (VW₅O₁₉⁵⁻, V₂W₄O₁₉⁴⁻, VMo₅O₁₉⁵⁻ and V₂Mo₄O₁₉⁴⁻) from aqueous solutions. The isopolyanion solutions were characterized by UV-Vis and ⁵¹V NMR spectroscopy. Vanadium, vanadium–tungsten and vanadium–molybdenum precursors and catalysts were also characterized by UV-Vis (diffuse reflectance) and solid state ⁵¹V NMR spectroscopy. An improved selectivity to propene in the presence of tungsten and molybdenum in VO_x/γ-Al₂O₃ was observed and attributed to dilution of vanadium by tungsten or molybdenum oxides on the γ-Al₂O₃ surface.     

The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

A rubber-modified thermoplastic where the morphology produced by phase-separation induced by polymerization disappears at high conversions

An unexpected experimental finding is reported where the primary morphology developed during polymerization-induced phase separation in a rubber-modified thermoplastic practically disappears at high conversions. This process was evidenced by light scattering (LS) and scanning electron microscopy (SEM) for a particular composition of solutions of polyisobutylene oligomers (PIB) in isobornylmethacrylate (IBoMA), during the free-radical polymerization of the monomer. The primary phase separation produced a dispersion of domains rich in PIB containing significant amounts of the monomer (IBoMA). Polymerization of the monomer in these domains occurred at high overall conversions producing the filling of dispersed domains with a PIBoMA-PIB blend that could not be distinguished from the matrix. Under these conditions the final material had the appearance of a homogeneous blend.     

Grouped Approach for the Design of H.264/AVC Motion Estimation Architectures

This letter presents a novel approach for organizing computational resources into groups within H.264/AVC motion estimation architectures, leading to reductions of up to 75% in the equivalent gate count with respect to state‐of‐the‐art designs.     

Time Decay of the Activity of the Reduction Reaction of NO by CO on a Pd/Al2O3 Catalyst

An experimental study is made of the time decay of activity of the CO–NO reaction on a Pd/Al₂O₃ looking at the effect on reaction order and apparent activation energy. The optimum kinetics parameters fitting the steady state data at moderate pressures are determined. The time decay curves are analyzed through various catalyst deactivation models.     

Photovoltaic characterization of amorphous hydrogenated and chlorinated silicon films

Hydrogenated and chlorinated silicon films were used to deposit Schottky barrier solar cells. Photovoltaic characterization, together with the results of electronic transport measurements, led to the conclusion that the presence of chlorine is detrimental to the properties of this kind of device.     

Minimum-energy state estimation for systems with perspective outputs

This paper addresses the state estimation of systems with perspective outputs. We derive a minimum-energy estimator which produces an estimate of the state that is "most compatible" with the dynamics, in the sense that it requires the least amount of noise energy to explain the measured outputs. Under suitable observability assumptions, the estimate converges globally asymptotically to the true value of the state in the absence of noise and disturbance. In the presence of noise, the estimate converges to a neighborhood of the true value of the state. These results are also extended to solve the estimation problem when the measured outputs are transmitted through a network. In that case, we assume that the measurements arrive at discrete-time instants, are time-delayed, noisy, and may not be complete. We show that the redesigned minimum-energy estimator preserves the same convergence properties. We apply these results to the estimation of position and orientation for a mobile robot that uses a monocular charged-coupled device (CCD) camera mounted on-board to observe the apparent motion of stationary points. In the context of our application, the estimator can deal directly with the usual problems associated with vision systems such as noise, latency and intermittency of observations. Experimental results are presented and discussed.     

Analysis and Design of Robust Controllers Using the Interval Diophantine Equation

In this paper the design of pole placement feedback controllers for interval plants is addressed within an Interval Analysis framework. Three main topics connected by the concept of interval Diophantine equation are treated: a relatively straightforward investigation about robust coprimeness of interval polynomials, a reliable computing approach for the design of pole placement controllers in the presence of inaccuracies of interval type, and the design of robust controllers with regional pole placement specifications. After explicitly characterizing a convex subset of robust controllers, the problem of designing non-fragile controllers is formulated as a design centering problem, which is then solved by a global optimization algorithm. Numerical examples illustrate the main characteristics of the approach proposed.This paper has been partially supported by grants from Conselho Nacional de Desenvolvimento Científico e Tecnológico–Brazil.     

High-electric-field effects and degradation of AlGaAs/GaAs power HFETs: a numerical study

This work presents a numerical study of high-field degradation and reliability issues of AlGaAs/GaAs power HFETs. A commercial two-dimensional drift–diffusion tool is used to investigate electric-field distributions, the effects of electron capture at the device surface under hot-carrier conditions, and the impact of drain recess scaling on such effects. Wherever experimental data are available for direct comparison, a good match is observed with our simulations. The main results of this study are (1) a validation of the hypothesis that attributes the main high-field degradation effects to electron capture over the gate–drain access region, and (2) design indications pointing out to the possibility of a reverse correlation between the gate–drain breakdown voltage and the device hot-carrier reliability.     

The multicultural perspective in therapy: A social constructionist approach.

Discusses the theoretical and clinical applications of the postmodern paradigm of social constructionism as a basis for counseling culturally different clients. Such applications avoid the trap of perpetuating the status-quo when working with minority and marginalized clientele. The main points of multiculturalism and social constructionism are summarized, and issues of mutual concern to both perspectives are examined. Applications to psychotherapy are explored, and the challenges of applying the social constructionist approach to culturally competent counseling are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)