Kinetic,thermodynamic parameters and in vitro digestion of tannase from Aspergillus tamarii URM 7115

Tannase is an enzyme used in various industries and produced by a large number of microorganisms. The aim of this study was to evaluate tannase production to determine the biochemical, kinetic, and thermodynamic properties and to simulate tannase in vitro digestion. The tannase-producing fungal strain was isolated from “jamun” leaves and identified as Aspergillus tamarii. Temperature at 26°C for 67?h was the best combination for maximum tannase activity (6.35-fold; initial activity in Plackett–Burman design—15.53?U/mL and average final activity in Doehlert design—98.68?U/mL). The crude extract of tannase was optimally active at 40°C, pH 5.5 and 6.5. Moreover, tannase was stimulated by Na⁺, Ca²⁺, Mg²⁺, and Mn²⁺. The half-life at 40°C lasted 247.55?min. The free energy of Gibbs, enthalpy, and entropy, at 40°C, was 81.47, 16.85, and ?0.21?kJ/mol?·?K, respectively. After total digestion, 123.95% of the original activity was retained. Results suggested that tannase from A. tamarii URM 7115 is an enzyme of interest for industrial applications, such as gallic acid production, additive for feed industry, and for beverage manufacturing, due to its catalytic and thermodynamic properties.     

On the stabilizing behavior of zirconia: A Combined experimental and theoretical study

Reactive zirconia powder was synthesized by the complexation of zirconium metal from zirconium hydroxide using a solution of 8-hydroxiquinoline. The kinetics of zirconia crystallization was followed by X-ray diffraction, scanning electron microscopy and surface area measured by the nitrogen adsorption/desorption technique. The results indicated that zirconia with a surface area as high as 100 m²/g can be obtained by this method after calcination at 500°C. Zirconia presents three polymorphic phases (monoclinic, tetragonal and cubic), which are reversibly interconversible. The cluster model Zr₄O₈ and Zr₄O₇ ⁺² was used for a theoretical study of the stabilization process. The ab initio RHF method was employed with the Gaussian94 program and the total energies and the energy gap of the different phases were calculated and compared with the experimental energy gap. The theoretical results show good reproducibility of the energy gap for zirconia.     

Probabilistic Wind Farms Generation Model for Reliability Studies Applied to Brazilian Sites

This paper presents a computer model for the probabilistic representation of wind farms generation for reliability studies, which can provide an annual estimation of energy production and calculate several performance indexes. The model combines the stochastic characteristics of wind speed with the operational information of the turbines, such as the failure and repair rates, representing the wind farm by a Markov process. The simulations are made with real time series of wind speed of several Brazilian regions and actual turbine models. The influence of some wind farm and installation site characteristics on the results are evaluated, such as the wind speed statistical clustering technique, the number and type of the turbines, and the failure and repair rates. The results obtained reproduce successfully the behavior of the components considered in the model     

Electrical Conductivity Measurement Through the Loaded Q Factor of a Resonant Cavity

We present a method for measuring the electrical conductivity of metallic materials that relies on the ratio of two loaded Q factors, Q_R/Q_X, with Q_R corresponding to a TE₀₁₁-mode reference cavity made of aluminum, and Q_X the Q that results upon replacing the aluminum plate with the one fabricated from the material to be examined. Electrical conductivity is mathematically inferred from the ratio Q_R/Q_X where the loaded Q factors are measured by using the transmission-type method. Within a 3.0 percent accuracy, conductivities determined at 8.7 GHz for electrolytic copper (5.6 times 10⁷ S/m) and brass (1.6 times 10⁷ S/m) show to be in good agreement with those reported in the literature.     

Nisin expression production from Lactococcus lactis in milk whey medium

BACKGROUND: Nisin is a commercially available bacteriocin produced by Lactococcus lactis ATCC 11454 and used as a natural agent in the biopreservation of food. In the current investigation, milk whey, a byproduct from dairy industries was used as a fermentation substrate for the production of nisin. Lactococcus lactis ATCC 11454 was developed in a rotary shaker (30 °C/36 h/100 rpm) using two different media with milk whey (i) without filtration, pH 6.8, adjusted with NaOH 2 mol L^?1 and without pH adjustment, both autoclaved at 121 °C for 30 min, and (ii) filtrated (1.20 µm and 0.22 µm membrane filter). These cultures were transferred five times using 5 mL aliquots of broth culture for every new volume of the respective media. RESULTS: The results showed that culture media composed of milk whey without filtration supplied L. lactis its adaptation needs better than filtrated milk whey. Nisin titers, in milk whey without filtration (pH adjusted), was 11120.13 mg L^?1 in the second transfer, and up to 1628‐fold higher than the filtrated milk whey, 6.83 mg.L^?1 obtained in the first^t transfer. CONCLUSIONS: Biological processing of milk byproducts (milk whey) can be considered a profitable alternative, generating high‐value bioproducts and contributing to decreasing river disposals by dairy industries. Copyright © 2008 Society of Chemical Industry     

Altered hippocampal kainate-receptor mRNA levels in temporal lobe epilepsy patients

This study determined whether hippocampal kainate (KA) receptor mRNA levels were increased or decreased in temporal lobe epilepsy patients compared with nonseizure autopsies. Hippocampal sclerosis (HS; n = 17), nonsclerosis (non-HS; n = 11), and autopsy hippocampi (n = 9) were studied for KA1-2 and GluR5-7 mRNA levels using semiquantitative in situ hybridization techniques, along with neuron densities. Compared with autopsy hippocampi, HS and non-HS cases showed decreased GluR5 and GluR6 hybridization densities per CA2 and/or CA3 pyramid. Furthermore, HS patients demonstrated increased KA2 and GluR5 hybridization densities per granule cell compared with autopsy hippocampi. These findings indicate that chronic temporal lobe seizures were associated with differential changes in hippocampal KA1-2 and GluR5-7 hybridization densities that vary by subfield and pathology group. In temporal lobe epilepsy patients, these results support the hypothesis that pyramidal cell GluR5 and GluR6 mRNA levels are decreased as a consequence of seizures, and in HS patients granule cell KA2 and GluR5 mRNA levels are increased in association with aberrant fascia dentata mossy fiber sprouting and/or hippocampal neuronal loss.     

A web-based platform for biosignal visualization and annotation

With the advent of wearable sensing and mobile technologies, biosignals have seen an increasingly growing number of application areas, leading to the collection of large volumes of data. One of the difficulties in dealing with these data sets, and in the development of automated machine learning systems which use them as input, is the lack of reliable ground truth information. In this paper we present a new web-based platform for visualization, retrieval and annotation of biosignals by non-technical users, aimed at improving the process of ground truth collection for biomedical applications. Moreover, a novel extendable and scalable data representation model and persistency framework is presented. The results of the experimental evaluation with possible users has further confirmed the potential of the presented framework.     

Simple approach for the plasma treatment of polymeric membranes and investigation of the aging effect

The modification of the surface characteristics after treatment with plasma in polymeric materials, such as the aging phenomenon, calls the attention of research in the area of nonthermal plasma technology. In this work, a direct treatment with dielectric-barrier discharge plasma was used on the surfaces of ultrafiltration membranes. The measurements of the contact angle with water, attenuated total reflectance accessory, zeta potential, atomic force microscopy and scanning electron microscopy-MEV were performed on the surfaces to verify changes after plasma treatment and to understand the occurrence and timing of the plasma aging effect. In the analysis of the membrane performance, hydraulic permeation and protein retention tests were performed. The results showed an improvement in wettability and hydrophilic properties in the post-treated membranes. The study of reversibility/aging of the post-plasma surface is important for research that deals with the modification of polymeric membranes. Changes in surface morphology, topography and wettability of the membranes were observed up to seven days after treatment, with a tendency to return to the initial characteristics of the membranes.     

Experience with model-based performance, reliability, and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture.