Performance engineering and topological design of metro WDM opticalnetworks using computer simulation

This paper demonstrates the use of computer simulation for topological design and performance engineering of transparent wavelength-division multiplexing metropolitan-area networks. Engineering of these networks involves the study of various transport-layer impairments such as amplifier noise, component ripple, chirp/dispersion, optical crosstalk, waveform distortion due to filter concatenation, fiber nonlinearities, and polarization effects. A computer simulation methodology composed of three main simulation steps is derived and implemented. This methodology obtains performance estimations by applying efficient wavelength-domain simulations on the entire network topology, followed by time-/frequency-domain simulations on selected paths of the network and finally Q-budgeting on an identified worst case path. The above technique provides an efficient tool for topological design and network performance engineering. Accurate simulation models are presented for each of the performance impairments, and the computer simulation methodology is used for the design and engineering of a number of actual metro network architectures     

Mössbauer spectroscopic studies of Fe-substituted YIG

Compositional dependence of hyperfine parameters, determined through Mössbauer spectral analysis has been studied for Y_3−xFe_5+xO₁₂ (x = 0.0, 0.1, 0.3 and 0.5) garnet system at 300 K. The Mössbauer spectra have been fitted with three sextets in the ferrimagnetic state corresponding to Fe³⁺ ions at tetrahedral (d), octahedral (a) and dodecahedral (c) sites of the crystal structure. It is observed that isormershift, quadrupole shift and hyperfine field of d-site show no significant variation with Fe³⁺ concentration. The change in hyperfine fields of a- and c-sites with composition (x) has been explained on the basis of strength of exchange integrals, change in isomershift can be understood due to s-electron charge distribution and asymmetric displacement of oxygen ions surrounding the a- and c-sites seems to be responsible for observable quadrupole shift. The magneton number values obtained from magnetization and Mossbauer data are in agreement to those calculated using Neel's three sublattice model of ferrimagnetism.     

A rule-based fuzzy-logic approach for the measurement of manufacturing flexibility

Manufacturing flexibility is a difficult to quantify concept that defies universal definition. This paper presents a novel fuzzy-logic approach for measuring manufacturing flexibility that exploits linguistic variables for quantifying pertinent factors affecting commonly utilized flexibility types. Towards this end, we identify and measure the contribution of specified state variables towards the assumed flexibility types in order to compute an overall flexibility index for a generic manufacturing system. The suggested framework provides a convenient end user approach amenable to software implementation that is exemplified through the development of a prototypical software tool called “Flexibility Evaluator”.     

One-step oxidation of cyclohexane to adipic acid

Liquid-phase oxidation of cyclohexane with Co(III) catalyst and gaseous oxygen was found to be influenced by reaction temperature, catalyst concentration and the duration. Maximum adipic acid product selectivity (77%) with about 85% cyclohexane conversion was attained at 100°C using catalyst: cyclohexane molar ratio 0·08. Under these conditions more than 80% cyclohexane was converted in the first hour, although selectivity to adipic acid continued to increase for the next 5 h. Cyclohexyl acetate and cyclohexyl monoadipate were identified as important intermediates. This study supports the mechanism proposed by Schultz, J. G. D. and Opchenko, A., J. Org. Chem., 38 (21) (1973) 3729.     

Thermally stimulated discharge current studies in pure and fe-doped polystyrene films

Studies were made on the thermally stimulated discharge currents (TSDCs) in pure (undoped) and Fe-doped polystyrene films as a function of polarizing field, polarizing temperature and dopant concentration. While undoped films exhibited a single peak, doped films showed two peaks one at low temperatures and another at high temperatures. The low temperature peak, which exhibits a shift towards lower temperatures with increasing dopant concentration, is attributed to the relaxation of the main chain, while the high temperature peak, which shows a tendency to shift towards higher temperatures with dopant concentration, is due to space charge polarization. The TSDCs were higher for low dopant concentrations than their undoped counterparts, while for high concentrations of the dopant, the TSDCs decreased. Formation of charge transfer complexes at low dopant concentrations and molecular aggregates at higher dopant concentrations are suggested as the possible reasons for this behaviour.     

Characterization of poly(vinyl alcohol)/sodium bromide polymer electrolytes for electrochemical cell applications

Sodium‐ion conducting polymer electrolytes based on poly(vinyl alcohol) complexed with sodium bromide were prepared with a solution‐casting technique. The structure of these films was determined with X‐ray diffraction, and the complexation of the salt with the polymer was confirmed with Fourier transform infrared spectroscopy studies. Electrical conductivity was measured with an alternating‐current impedance analyzer in the frequency range of 100 Hz to 1 MHz and in the temperature range of 303–373 K. It was observed that the magnitude of conductivity increased with the increase in the salt concentration as well as the temperature. The nature of the charge transport in these polymer electrolyte films was determined with both Wagner's polarization technique and the Watanabe technique. The dominant conducting species were found to be ions, particularly anions. Optical absorption studies were performed in the wavelength range of 200–600 nm, and the absorption edge, direct band gap, and indirect band gap values were evaluated. Electrochemical cells were fabricated, and their discharge characteristics were studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Functional copolymer of geraniol and acrylonitrile: Synthesis and characterization

The radical copolymerization of acyclic terpene namely geraniol [GER] with acrylonitrile [AN] in DMF at (70 ± 0.1)°C for 1 h, using benzoylperoxide (BPO) as an initiator has been carried out under inert atmosphere of nitrogen. The kinetic expression for reaction is R_p ∝ [BPO]^0.5 [AN]^1.0 [GER]^1.0. The IR spectrum of the copolymer shows bands at 3432 and at 2244 cm^?1 due to ? OH group of GER and ? CN group of AN, respectively. The ¹³C‐NMR spectrum shows peaks at 73–75 δ ppm and 116–120 δ ppm due to ? OH group of GER and ? CN group of AN, respectively. The thermogravimetric analysis and differential scanning calorimetry study shows that copolymer is thermally stable up to 407°C and has glass transition temperatures (T_g) 56°C. The reactivity ratios r₁ (AN) and r₂ (GER) have been calculated as 0.05 and 0.005, respectively. The Alfrey‐Price Q‐e parameter for GER has been calculated as 0.094 and ?2.0, respectively. The molecular weights of the copolymers have been evaluated by gel‐permeation chromatography. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Application of Machine Learning Algorithms With and Without Principal Component Analysis for the Design of New Multiphase High Entropy Alloys

Metallurgical and Materials Transactions A - The design of high entropy alloys (HEAs) can be accelerated using machine learning (ML) algorithms. In the current study, the design parameter’s...