Investigation of the action of flame retardants in cellulose. I. Investigation of the flame retardant action of 2,2′-oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide) in cellulose

Pyrolysis experiments were performed in high vacuum and under reduced air pressure (100 Pa). The volatile products of pure cellulose and cellulose containing various amounts of flame retardant 2,2′-oxybis (5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide), i.e., Sandoflam 5060 of Sandoz AG, were studied by means of gas chromatography in combination with mass spectroscopy. The volatile products were characterized with infrared spectroscopy. The studied revealed that the incorporation of the flame retardant enhanced the water release and shifted the onset of this reaction to lower temperature. On the basis of these findings an explanation for the mechanism of flame retardancy in generated cellulose fibers modified with this particular flame retardant is attempted. From experiments with different residual air pressure the influence of oxygen on the primary processes of the pyrolytic degradation of cellulose is being discussed.     

Electrosynthesis and impedance studies on zinc selenide

Electrochemical impedance measurements have been used to characterize zinc selenide films prepared by electrochemical co-deposition at a platinum rotating disk electrode. Estimations of capacitance and polarization resistance of variously prepared electrodeposits have been carried out to determine charge carrier density and corrosion rates.     

Synthesis and characterisation of N-toluyl methacrylatoethyl carbamates,homopolymers and copolymers with methyl methacrylate

The paper describes the synthesis of N-2/4-toluyl methacrylatoethyl carbamates using 2/4-toluyl isocyanate and 2-hydroxyethyl methacrylate. Homopolymerisation and copolymerisation of these novel monomers with methyl methacrylate was carried out using benzoyl peroxide as an initiator and tetrahydrofuran as solvent. Photopolymerisation of N-4-toluyl methacrylatoethyl carbamate could be carried out without the use of photosensitiser. Structural characterisation of copolymers was done using ¹H-NMR. Thermal stability of copolymers was evaluated in a nitrogen atmosphere by dynamic thermogravimetry.     

Preparation,structural elucidation,molecular weight determination,and molecular recognition of first‐ and second‐tier dendrimer molecules

1,3,5‐Triglyceratetriazine [first tier (G₁)] and tri(1,3,5‐triglycerate) triazine [second tier (G₂)] dendrimers were prepared with 1,3,5‐trichlorotriazine and sodium glycerate in a 1 : 3 mass ratio in an ethanolic medium.G₁ and G₂ were amorphous, white, solid substances. Their structures were elucidated with IR, ¹H‐NMR, and ¹³C‐NMR, and their thermal stability was studied with thermogravimetric analysis. The activation energy was calculated with the Freeman–Carroll model. Densities, viscosities, and surface tensions for 0.01–0.08 mol/kg aqueous solutions increased at 0.01 mol/kg for sodium glycerate, 1,3,5‐trichlorotriazine, 1,3,5‐triazine triglycerate chloride, G₁, and G₂. These values were measured at 298.15 K. The apparent molal volume, reduced viscosity, and inherent viscosity were calculated from the densities and viscosities, respectively. The data were regressed for the limiting densities, limiting apparent molal volumes, intrinsic viscosities, limiting inherent viscosities, and limiting surface tensions for solute–solvent interactions. The positive limiting apparent molal volume values were noted in the order of G₂ > 1,3,5‐triazine triglycerate chloride > G₁ > 1,3,5‐trichlorotriazine > sodium glycerate, with weaker hydrophilic intermolecular interactions of G₂. The higher intrinsic viscosity and limiting inherent viscosity values for G₂ implied stronger G₂–H₂O hydrophilic interactions, and the higher limiting apparent molal volume of G₂ indicated slightly higher dynamic conformational changes in comparison with G₁, with stronger structural activities. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Network and device-level impacts: performance and reliability of active I/O storage systems

Distributed active storage architectures are designed to offload user-level processing to the peripheral from the host servers. In this paper, we report preliminary investigation on performance and fault recovery designs, as impacted by emerging storage interconnect protocols and state-of-the-art storage devices. Empirical results obtained using validated device-level and interconnect data demonstrate the significance of the said parameters on the overall system performance and reliability.