Photon and vibration synergism on planar defects induced 2D-graphitic carbon nitride for ultrafast remediation of dyes and antibiotic ampicillin

Journal of Materials Science - Hybrid oxidation methodologies (HOMs) and active site enrichment of 2D nanocatalyst through defects induction are ubiquitously used for generating adequate reactive...     

Effect of spheroidized microstructure on the impact toughness and electrochemical performance of a high-carbon steel

The influence of cementite spheroidization on the impact toughness and electrochemical properties of a high-carbon steel has been thoroughly investigated in this study. Heavy warm rolling, followed by 2 h of annealing, has resulted in near-complete spheroidization, leading to a microstructure consisting of nano-cementite globules dispersed in the ultrafine-grained ferritic matrix. The Charpy impact test exhibited superior impact toughness with increased spheroidization. It is validated by the presence of abundant dimples in the fractographs of spheroidized specimens, in contrast to the as-received one that experienced a brittle failure due to its lamellar pearlitic structure. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) carried out in a 3.5% NaCl solution revealed that the corrosion resistance of the alloy gets improved with the increase in the degree of spheroidization. This is attributed to the lower susceptibility of the spheroidized specimen to microgalvanic corrosion owing to the minimum area of contact between nano-spheroidized cementite and ferrite, as elucidated with the help of EIS results aided by equivalent electrical circuit model.     

Design and performance study of phase‐locked loop using fractional‐order loop filter

The present work reports the realization of an analog fractional‐order phase‐locked loop (FPLL) using a fractional capacitor. The expressions for bandwidth, capture range, and lock range of the FPLL have been derived analytically and then compared with the experimental observations using LM565 IC. It has been observed that bandwidth and capture range can be extended by using FPLL. It has also been found that FPLL can provide faster response and lower phase error at the time of switching compared to its integer‐order counterpart. Copyright © 2014 John Wiley & Sons, Ltd.     

A review on the synthesis of in situ aluminum based composites by thermal,mechanical and mechanical–thermal activation of chemical reactions

The aim of the present paper is to review the recent progress in the synthesis of in situ particle reinforced aluminum composites using thermal, mechanical and combined mechanical-thermal activation of aluminothermic reduction reactions. The combination of combustion synthesis (CS) and mechanosynthesis (MS) is the most recent development in the processing of advanced materials like micro and nano aluminum based composites. The combined mechanical thermal synthesis (MTS) has widened the possibilities for both CS and MS. MTS holds great potential for commercial viability and offers exciting processing route for the synthesis of advanced materials. Enhanced reaction kinetics and extended concentration limits in MTS are demonstrated by illustrating the synthesis of aluminum based nanocomposite involving Al–CeO₂.     

Mössbauer Study of the Influence of Fe-Si-N Liquid in the Synthesis of β-Si3N4 from Silica

Mössbauer spectra of the products obtained by carbothermal reduction and distribution of silica in the presence of iron in the temperatures range 1200^o to 1540^o were studied. The preponderance of β- Si₃N₄ over the α form at a higher reaction temperature were assumed to be related to the formation of an Fe-Si-N liquid. The liquid did not alter its composition with the variation of reduction-temprature, Iron had no effect on the reaction mechanism below 1300^oC.     

Design and characterization of asymetrical super-lattice Si/4H-SiC pin photo diode array: a potential opto-sensor for future applications in bio-medical domain

Microsystem Technologies - Photo-sensors are integral part of different bio-medical diagnostic equipment. Each type of bio-molecules possess unique spectral fingerprint in visible wavelength region...     

Synthesis of AlPO4 Molecular Sieves with AFI and AEL Structures by Dry-Gel Conversion Method and Catalytic Application of Their SAPO Counterparts on Isopropylation of Biphenyl

AlPO₄-5 and AlPO₄-11 were synthesized by dry-gel conversion (DGC) method. Steam-assisted conversion (SAC) and vapor-phase transport (VPT) techniques were applied for this purpose. The synthesis was successful in presence of a certain minimum amount of external bulk water, without which the crystallization failed. Crystallization by VPT method was slower than corresponding SAC and HTS method. SAPO analogs of the samples, SAPO-5 and SAPO-11 were also synthesized by DGC method. Samples made by DGC methods had higher yield than the conventional hydrothermal synthesis (HTS); otherwise the samples showed similar characteristics as that made by HTS. XRD, SEM and N₂-adsorption results showed high crystallinity and purity of the samples made by DGC, and ²⁷Al MAS NMR spectra indicated the tetrahedral framework nature of Al. SAPO-5 and SAPO-11 were tested for their catalytic activity in isopropylation of biphenyl, and in terms of conversion and selectivity, SAPO-5 was found to be suitable for this application.     

Numerical simulations of drop impact and spreading on horizontal and inclined surfaces

The phenomenon of drop spreading is important to several process engineering applications. In the present work, numerical simulations of the dynamics of drop impact and spreading on horizontal and inclined surfaces were carried out using the volume of fluid (VOF) method. For the horizontal surfaces, the dynamics of impact and spreading of glycerin drops on wax and glass surfaces was investigated for which the experimental measurements were available [Šikalo, Š., Tropea, C., Ganic, E.N., 2005a. Dynamic wetting angle of a spreading droplet. Experimental Thermal and Fluid Science 29, 795-802; Šikalo, Š., Tropea, C., Ganic, E.N., 2005b. Impact of droplets onto inclined surfaces. Journal of Colloid and Interface Science 286, 661-669]. The influence of surface wetting characteristics was investigated by using static contact angle (SCA) and dynamic contact angle (DCA) models. The dynamics of drop impact and spreading on inclined surfaces and the different regimes of drop impact and spreading process were also investigated. In particular, the effects of surface inclination, surface wetting characteristics, liquid properties and impact velocity on the dynamics of drop impact and spreading were investigated numerically and the results were verified experimentally. It was found that the SCA model can predict the drop impact and spreading behavior in quantitative agreement with the experiments for less wettable surfaces (SCA>90^°). However, for more wettable surfaces (SCA<90^°), the DCA observed at initial contact times were order of magnitude higher than SCA values and therefore the DCA model is needed for the accurate prediction of the spreading behavior.