Entrepreneurship in an Unstable Environment: The Experience of the Occupied Territories

The research aims at exploring the relationship between small business enterprises and their environments through an empirical investigation of the methods and strategies adopted by a number of industrial firms operating in the West Bank and the Gaza Strip in response to the exigencies and challenges of the uprising in the occupied territories in order to survive. Though the problems faced by the industrial sector as a result of the unique situation in the areas are almost unparalleled in other parts of the world, it has been possible to gain fresh insight into the dynamics of the environmental factors and their impact on organizational structure and function. Despite innumerable obstacles, the industrial sector has achieved a reasonable degree of growth.     

An assessment of the θ-projection method for the representation and extrapolation of creep data for a 1%Cr, 12%Mo, 14%V steel tested at 565°C

Constant stress creep data for a wrought 1%Cr, $\text{1}\text{2}\text{\%}\text{Mo}$, $\text{1}\text{4}\text{\%}\text{V}$ steel obtained from six tests carried out at 565°C have been fitted and extrapolated using the θ-projection method. Creep curves for high stresses were fitted well, but curves extrapolated to stress levels below those used in the θ-projection did not represent well the available data for primary-secondary creep. To enable a satisfactory extrapolation of results, it was found necessary to redefine the failure condition to be less sensitive to the shape of the latter sections of the tertiary creep curve. This was achieved by defining lifetime as the point on the curve at which the strain rate reached a fixed multiple of the creep rate at half the rupture time. The extrapolated data compare well with the results of tests carried out independently on a cast 1%Cr, $\text{1}\text{2}\text{\%}\text{Mo}$, $\text{1}\text{4}\text{\%}\text{V}$ steel. The extrapolation procedure not only predicts the ‘knee’ in the log stress-log lifetime curve but allows extrapolation of lifetimes by over a factor of thirty. In addition, acceptable predictions have been made of constant load experimental data.     

Chromosome comparison between populations of the collared peccary, Tayassu tajacu, raised in captivity

The collared peccary (Tayassu tajacu) is widely distributed over the American continent, being found from the south of the USA to the north of Argentina. In Brazil, it is spread all over the country, being one of the potential species to be raised in captivity. Therefore, the cytogenetic techniques could be a potential tool for reproductive monitoring of animals raised in captivity, mainly when destined for commercial purposes. This study had the objective of determining the chromosome number of two populations raised in captivity and characterizing them by GTG banding. For this purpose, an analysis was made of mitotic metaphases obtained from lymphocyte cultures made from blood samples of 11 animals, six of which from the Northeast and five from the North of Brazil. The results of this analysis showed the same karyotype pattern for the species (2n=30 chromosomes and NF=48), besides corresponding to the South American pattern of the species, i.e., without a translocation between autosomes 1 and 8, chromosome X acrocentric, and no differences were found between the two populations studied. However, chromosomal polymorphisms were observed compared to data from the literature on populations from North and South America.     

The mechanical properties of epoxy resins

Crack propagation in a series of epoxy resins described in Part 1 has been studied as a function of testing rate and temperature. It has been found that crack propagation is continuous at low temperatures but that as the temperature is raised the mode of propagation becomes unstable (stick/slip). Features on the fracture surfaces at the crack arrest lines have been shown to be of the same dimensions as those expected for a Dugdale plastic zone. It has been suggested that the slip process takes place by slow growth of a crack through the plastic zone followed by rapid propagation through virgin material. It has been shown that the stick/slip behaviour is due to blunting of the crack which is controlled by the yield behaviour of the resin. A unique fracture criterion has been shown to be applicable to epoxy resins which is that a critical stress of the order of three times the yield stress must be achieved at a critical distance ahead of the crack. Electron microscope replicas of the fracture surfaces have been obtained and an underlying nodular structure can be resolved. However, no direct correlation between the nodule size and fracture properties has been found.     

Crack propagation in and fractography of epoxy resins

The relationship between the stability of crack propagation in, and the fracture surface appearance of, DGEBA epoxy resins cured with TETA has been investigated using a linear elastic fracture mechanics approach. In particular, the effect of varying the amount of curing agent and curing conditions and altering external variables such as testing rate, temperature and environment have been studied. Under certain conditions, propagation is found to be stable and fracture surfaces have a smooth appearance. Under other conditions the cracks propagate in an unstable stick-slip manner. In this case, arrest lines can be seen on the fracture surfaces and their intensity and roughness increases with the magnitude of the crack jumps. The roughness of the fracture surfaces has been measured using a Talysurf and this has been shown to be due principally to deviation of the cracks from the original fracture plane rather than any gross plastic deformation.     

Role of miRNAs in Human T Cell Leukemia Virus Type 1 Induced T Cell Leukemia: A Literature Review and Bioinformatics Approach

Human T cell leukemia virus type 1 (HTLV-1) was identified as the first pathogenic human retrovirus and is estimated to infect 5 to 10 million individuals worldwide. Unlike other retroviruses, there is no effective therapy to prevent the onset of the most alarming diseases caused by HTLV-1, and the more severe cases manifest as the malignant phenotype of adult T cell leukemia (ATL). MicroRNA (miRNA) dysfunction is a common feature of leukemogenesis, and it is no different in ATL cases. Therefore, we sought to analyze studies that reported deregulated miRNA expression in HTLV-1 infected cells and patients’ samples to understand how this deregulation could induce malignancy. Through in silico analysis, we identified 12 miRNAs that stood out in the prediction of targets, and we performed functional annotation of the genes linked to these 12 miRNAs that appeared to have a major biological interaction. A total of 90 genes were enriched in 14 KEGG pathways with significant values, including TP53, WNT, MAPK, TGF-β, and Ras signaling pathways. These miRNAs and gene interactions are discussed in further detail for elucidation of how they may act as probable drivers for ATL onset, and while our data provide solid starting points for comprehension of miRNAs’ roles in HTLV-1 infection, continuous effort in oncologic research is still needed to improve our understanding of HTLV-1 induced leukemia.     

Tuning fuzzy PD and PI controllers using reinforcement learning

In this paper, we propose a new auto-tuning fuzzy PD and PI controllers using reinforcement Q-learning (QL) algorithm for SISO (single-input single-output) and TITO (two-input two-output) systems. We first, investigate the design parameters and settings of a typical class of Fuzzy PD (FPD) and Fuzzy PI (FPI) controllers: zero-order Takagi–Sugeno controllers with equidistant triangular membership functions for inputs, equidistant singleton membership functions for output, Larsen’s implication method, and average sum defuzzification method. Secondly, the analytical structures of these typical fuzzy PD and PI controllers are compared to their classical counterpart PD and PI controllers. Finally, the effectiveness of the proposed method is proven through simulation examples.     

AODVCS,a new bio-inspired routing protocol based on cuckoo search algorithm for mobile ad hoc networks

Mobile ad hoc networks (MANETs) are becoming an emerging technology that offer several advantages to users in terms of cost and ease of use. A MANET is a collection of mobile nodes connected by wireless links that form a temporary network topology that operates without a base station and centralized administration. Routing is a method through which information is forwarded from a transmitter to a specific recipient. Routing is a strategy that guarantees, at any time, the connection between any two nodes in a network. In this work, we propose a novel routing protocol inspired by the cuckoo search method. Our routing protocol is implemented using Network simulator 2. We chose Random WayPoint model as our mobility model. To validate our work, we opted for the comparison with the routing protocol ad hoc on-demand distance vector, destination sequence distance vector and the bio-inspired routing protocol AntHocNet in terms of the quality of service parameters: packet delivery ratio and end-to-end delay (E2ED).     

Performance of Layered Steered Space–Time Codes in Wireless Systems

Layered Steered Space–Time Codes (LSSTC) is a recently proposed multiple-input multiple-output (MIMO) system that combines the benefits of vertical Bell Labs space–time (VBLAST) scheme, space–time block codes (STBC) and beamforming. In this paper, we derive the error performance and capacity of a single-user LSSTC system. The analysis is general enough to any layer ordering and modulation schemes used. In addition, the derived analysis is general for any LSSTC structure in which layers may have different number of antenna arrays and may be assigned power according to any power allocation. Furthermore, we analytically investigate the tradeoff between the main parameters of the LSSTC system, i.e., diversity, multiplexing and beamforming. Our results give recursive expressions for the probability of error for LSSTC which showed nearly perfect match to the simulation results. Results have also revealed the possibility of designing an adaptive system in which it was shown that combining beamforming, STBC, and VBLAST has better performance than VBLAST at high SNR range.