Optimization of downhole pump setting depths in liquid-dominated geothermal systems: A case study on the Balcova-Narlidere field,Turkey

Downhole pumps are being used increasingly more often in low-enthalpy geothermal wells. The depth at which these pumps are installed depends on the physical and chemical characteristics of the geothermal fluid, the production flow rate, and the reservoir pressure and permeability. In this study we have investigated the factors affecting pump setting depths in low-temperature, liquid-dominated geothermal systems and defined the relationship between flow rate and pressure drawdown based on multi-rate test results. The methodology proposed was applied to the Balcova-Narlidere geothermal field, Turkey. It was found that the most important parameters for determining the capacity and setting depth of a downhole pump were flow performance, non-condensable gas concentration, and temperature. The implementation of the methodology is illustrated.     

Mechanical behaviour of SiC fibre-reinforced titanium/titanium aluminide hybrid composites

The viability of developing an SiC fibre-reinforced titanium/titanium aluminide hybrid matrix composite was explored. The hybrid composites are expected to be used at temperatures beyond those attainable in conventional titanium matrix composites while improving the damage tolerance of the titanium aluminide matrix composites. The room-temperature mechanical characteristics studied were tensile strength, fracture toughness, low-cycle fatigue life and fatigue crack growth rate. The mechanisms of damage initiation and propagation under various loading conditions were also characterized. The directions for developing a satisfactory composite with hybrid titanium/titanium aluminide matrix are also addressed.     

Synthesis and characterization of novel polyacrylate-clay sol-gel materials

Organo-functional silanes which were able to form chemical bonds with kaolinite and could also have an affinity to the materials of concern here, were studied by the sol-gel process. Polymethacrylate with trialkoxy silyl functional groups were prepared, hydrolysed and co-condensed with kaolinite. The progress of the hydrolysis, which proceeded very slowly, was followed by Karl-Fischer titration. Thermal behavior was investigated by differential thermal analysis. The extent of the reaction leading to network formation was qualitatively followed by Fourier transform-infrared spectroscopy and X-ray diffraction. Free-radical polymerization was carried out ultrasonically in the presence of a catalyst. Trimethoxy silane end-capped silane was found to be covalently bonded to kaolinite. The copolymers, with various amounts of kaolinite, were then hydrolysed and co-condensed in the presence of a catalyst to yield sol-gel materials which have a controllable combination of properties of both the polymer and kaolinite.     

Methacrylate-functionalized POSS influence on cross-linking and mechanical properties of styrene-butadiene rubber

Iranian Polymer Journal - The addition of methacrylate-functional polyhedral oligomeric silsesquioxane (MA-POSS) nanoparticles to styrene-butadiene rubber (SBR) composites was evaluated in terms of...     

Corrosion behavior of tempered dual-phase steel embedded in concrete

Dual-phase(DP) steels with different martensite contents were obtained by appropriate heat treatment of an SAE1010 structural carbon steel,which was cheap and widely used in the construction industry. The corrosion behavior of DP steels in con-crete was investigated under various tempering conditions. Intercritical annealing heat treatment was applied to the reinforcing steel to obtain DP steels with different contents of martensite. These DP steels were tempered at 200,300,and 400°C for 45 min and then coo...     

Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys

In this systematic study, dispersion-strengthening effect of the Cu–25.91Mn (wt.%), Cu–26.62Mn–8.99Al (wt.%), Cu–22.17Mn–12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature in different periods and cooled with different cooling rates. After processes, microanalysis of the samples were interpreted by using scanning electron microscope (SEM) and weight percentages of the elements of the occurrence phases in the samples obtained by using electron dispersion spectroscopy (EDS) technique. Additionally, some characteristic properties of the heat treated samples with different conditions of Cu–Mn, Cu–Mn–Al, Cu–Mn–Zn ingot alloys were also discussed.     

A study of ergonomics factors in washbasin design

A 4-week UNESCO-sponsored mission to the Department of Architecture, Karadeniz Technical University in Eastern Turkey, gave an opportunity to apply ergonomics techniques to some aspects of that country's domestic washbasin design. The study was intended to provide experience in questionnaire design and administration, in the application of psycho-physical methods, and to highlight the importance of determining user characteristics and preferences with regard to the built environment. A field study elicited information on dimensions and positioning of existing wash-basins and ancillary equipment and the opinions of users as to the suitability of these features in relation to the activities performed. A laboratory study, using an adjustable rig permitting variation in the heights of basin, taps and mirror/shelf, followed. The data obtained on preferred heights of these items led to the conclusions that basin height should be increased to between 95 and 100 cm to satisfy the majority of users; tap height above the basin should be reduced to about 11 cm; the shelf and lower edge of a mirror sited above the basin should be 136 cm above the floor; and a clear space of 110 cm should be available between the front of the basin and a wall or other obstruction. Suggestions on other design aspects of the bathroom, resulting from the study, are discussed.     

Investigation of the Equivalence of National Dew-Point Temperature Realizations in the ?50?°C to +?20?°C Range

In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4?years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from ?50?°C to +20?°C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008?°C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025?°C at ?50?°C and 0.010?°C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.     

Power‐law conductivity in polythiophene/copper(II) acetylacetonate composites

This paper reports the charge transport mechanism of polythiophene (PT) matrix composites having various concentrations of copper(II) acetylacetonate. Characterization and structural analyses of the samples were carried out via Fourier transform infrared spectroscopy, atomic absorption spectroscopy, differential scanning calorimetry, thermogravimetric analysis and scanning electron microscopy (SEM). The alternating current electrical properties were investigated as a function of temperature. The change of free energy of adsorption calculated from the Langmuir adsorption isotherm showed that metal ions were electrostatically adsorbed onto polymer chains. Significant morphological changes were observed from SEM images of PT depending on doping process which in turn affected the thermal degradation of PT. The charge transport mechanism determined from a power law showed that there was one frequency‐dependent conductivity region for PT, while there were two regions for the composites in contrast to studies reported in the literature. © 2013 Society of Chemical Industry     

Preparation and properties of selective polyurethane films and their use for the development of biomedical dopamine sensor

Polyurethane films were synthesized by 3,4-divanillyltetrahydrofuran and different diisocyanates. These prepared polyurethanes were characterized by FT-IR, DSC, DTA, and TGA techniques. For the amperometric applications, synthesized polyurethanes exhibited suitable T_g (°C), good thermal stability and good adhesive properties. In addition, because of their interesting film properties, attempts were made to prepare dopamine-sensing electrode. For this reason, selectivity of film-coated electrodes obtained from the chemically prepared polyurethanes toward electroactive and nonelectroactive species were examined by means of DPV technique. From the electrochemical results obtained, it has been demonstrated that the PU-1-coated electrode can be used for the development of biomedical sensor.