Molten salt synthesis of MAX phases in the Ti-Al-C system

The molten salt method was used to synthesise the MAX phase compounds Ti₂AlC and Ti₃AlC₂ from elemental powders. Between 900–1000?°C, Ti₂AlC was formed alongside ancillary phases TiC and TiAl, which decreased in abundance with increasing synthesis temperature. Changing the stoichiometry and increasing the synthesis temperature to 1300?°C resulted in formation of Ti₃AlC₂ alongside Ti₂AlC and TiC. The type of salt flux used had little effect on the product formation. The reaction pathway for Ti₂AlC was determined to be the initial formation of TiC_1-x templating on the graphite and titanium aluminides.     

Spinal abscess of Haemophilus paraphrophilus. A case report

STUDY DESIGN: A case of paraspinal abscess formation from Haemophilus paraphrophilus is presented. OBJECTIVES: To describe a case of paraspinal abscess formation from H. paraphrophilus, a fastidious commensal organism of the mouth and pharynx. A precise bacteriologic identification can be difficult; techniques for such identification are discussed. SUMMARY OF BACKGROUND DATA: Spinal abscess caused by H. paraphrophilus is unusual and can be very difficult to diagnose. METHODS: The etiology, clinical presentation, technical examinations, and treatment are reviewed. RESULTS: Prolonged antibiotic treatment was curative, although surgery was considered. CONCLUSIONS: Bacteriologic diagnoses in these rare infections are difficult. Antibiotic therapy was curative in the patient described.     

Managing your process hazards as a means of conforming to ohsa requirements

There is considerable evidence that improper changes have directly caused or through the “domino sequence” led to many of the major accidents that have occurred in the chemical process industry and related industries that use hazardous chemicals and technology. Central Government has recognised the importance of careful management of change(MOC) for ensuring the safety of chemical operations and the quality of manufactured goods by the proposed adding of the Major Hazardous Installation Regulation to the OHSA (Act 85 of 1993).

The concept and the need to properly manage change are not new; many companies have adopted MOC procedures. It is common practice nowadays to perform detailed risk assessments on any new or intended project to ensure safety and reliability of the project. Yet, incidents and near misses attributable to inadequate management of changes on existing systems and processes continue to occur. To improve the performance of MOC systems throughout industry, managers need advice on how to better institutionalise MOC systems within their companies and plants.

The purpose of this paper is to define the important features of MOC systems and to assist in the implementation and management of process hazards. MOC systems help ensure that changes to design and operation of company facilities will not adversely affect employees, the public, or the environment. This document outlines a process that can be used for designing, developing, installing, operating, and maintaining MOC systems at individual company sites.

This paper is intended for an audience ranging from plant and corporate managers of process safety to workers who have differing levels of knowledge about the principles of safely managing change. It is primarily designed to equip people responsible for MOC systems with new ideas for implementing and improving MOC systems. It was indeed a privilege to have met the personnel of JBF Associates, Inc. and Process Safety Institute in Knoxville, Tennessee, USA, without whose lectures and study material (including the book “Managing process changes”) this paper would never have seen the light. They have succeeded in putting me firmly on the “process safety road”.     

Calibrating screens for continuous colour displays

This paper focuses on two issues that are important to those who use colour monitors for research in vision. One is concerned with the measurement and calibration of colour screens. To this end the luminance and chromaticity readings of a tri-filter colorimeter and a spectroradiometer are compared (both commonly used to calibrate screens). The second is concerned with screen interactions, whereby colours can be distorted from their expected or calculated values by the colours displayed in neighbouring areas. This issue is crucial for those who use measurements of the light emitted from the red, green and blue phosphors of a monitor in isolation to specify other colours on screen, particularly in the research areas of colour contrast and colour constancy, since the specified colours may not actually be displayed. Finally, an alternative calibration method is described that uses an iterative measurement procedure to obtain screen specifications that are accurate regardless of the display complexity, so that researchers can be confident that the required colours are actually displayed on the screen.     

Evaluation of Serum Volume Losses During Long-Term Storage

Aliquots of serum collected in a large case-control study of cervical cancer were stored at −70°C for up to 4 years during implementation of the study. When 500 μL serum aliquots were thawed in preparation for carotenoid and vitamin A assays, volumes were noticeably variable and fell below 500 μL in the majority of the samples. We were concerned about evaporation/sublimation during storage of the samples because loss of water would concentrate the analytes of interest. We evaluated the use of density and sodium ion concentration measurements to confirm its occurrence. We found that serum density was an unreliable indicator of extent of volume loss since the anticipated increases in density due to evaporation were of the same magnitude as inter-individual variation in serum density. In contrast, Na⁺ concentration is tightly regulated and would rise if water had been lost from the samples. In a representative sample of serum aliquots from the case-control study, 24 of 25 vials contained less than 500 μL of serum. The mean sodium ion concentration (138.1 ± 3.6 mmol/L) was within the normal range for human serum of 136–145 mmol/L, and no correlation was observed between serum volume and Na⁺ concentration. These results strongly suggest that the observed low volumes were not due to evaporative losses. Instead, the variably low volumes of serum aliquots were probably due to pipetting errors in the initial aliquotting resulting from the use of air-displacement pipettes.     

Using transistors to linearise biochemistry

A fundamental relationship exists between diffusion characteristics within semiconductors and Nernstian equilibrium in biological systems. In a transistor operating in weak inversion the potential difference between terminals governs electron concentration in an exponential way according to the Boltzmann distribution of charged particles while in a biochemical cell the potential difference across a membrane is governed by ionic concentration in a logarithmic way according to the Nernst equation. These two nonlinear physical phenomena form an interaction that potentially leads to linearisation and subsequent modelling of or interaction with biological systems by integrated semiconductor devices. To demonstrate the authors' hypothesis a silicon transistor-based biosensor is considered. This natural bridge between biochemistry and semiconductor silicon chips will enable the potential mass production of portable biochemical devices for the consumer market     

Serum concentrations of cancer antigen 125, placental alkaline phosphatase, cancer-associated serum antigen and free beta human chorionic gonadotrophin as prognostic markers for epithelial ovarian cancer

OBJECTIVE: To investigate the prognostic significance of elevated levels of cancer antigen 125 (CA125), placental alkaline phosphatase (PLAP), free beta human chorionic gonadotrophin (hCG) and cancer-associated serum antigen (CASA) in women with primary epithelial ovarian carcinoma. DESIGN: A two year follow up study of survival. SETTING: A tertiary care gynaecological oncology unit. PARTICIPANTS: One hundred and eleven women with histologically confirmed epithelial ovarian cancer. MAIN OUTCOME MEASURES: Survival over a two year period. RESULTS: Stage corrected log-rank chi 2 tests demonstrated a significant effect on survival for all four tumour markers (CA125 P = 0.0142; PLAP P < 0.0001; CASA P = 0.0098; hCG P = 0.0002). This was confirmed when each variable was fitted together with disease stage in Cox proportional hazard models. When fitted as multiple variables in a Cox proportional hazard model, the addition of free beta-hCG and CASA to disease stage, PLAP concentrations and CA125 levels did not demonstrate further prognostic value. CONCLUSIONS: Levels of all four markers correlate with survival in patients with epithelial ovarian cancer. The combination of PLAP and CA125 concentrations together with disease stage may be used to predict survival but the addition of hCG and CASA levels do not give additional prognostic information.     

Preferred exocyclic-amino coordination of W(CO)5 on 2-aminopyrimidine and 4-aminopyrimidine vs. heterocyclic N-1 coordination for 2-aminopyridine

2-Aminopyrimidine (2-ampym) and 4-aminopyrimidine (4-ampym) coordinate to W(CO)₅ predominantly via the exocyclic amino group (>91% in 10 min photolysis) rather than to the endocyclic N-1 position as found for 2-aminopyridine (2-ampy). Photolysis of W(CO)₆ in acetone in the presence of these ligands forms amino-bound [W(CO)₅(2-ampym)] and [W(CO)₅(4-ampym)] complexes. Secondary photolysis generates 18% (1.0 h photolysis) [W(CO)₄(2-ampym)] or [W(CO)₄(4-ampym)], chelated via the exocyclic amine and the adjacent endocyclic position (N-1 and N-3, respectively). Only ca. 10% of the more unhindered N-1-bound W(CO)₅(4-ampym) was detected compared to virtually complete coordination via the exocyclic amino group for [W(CO)₅(2-ampym)]. M 94 calculations show that the W(CO)₅ coordination to the exocyclic donor is favored by 98.8 and 95.6 kcal/mol over the adjacent endocyclic position in the 2-ampym and 4-ampym complexes, respectively. Calculated W–N bond lengths by the M 94 methods gave exo-amine W–N bond distances of 2.24 and 2.26 Å and theoretical adjacent endocyclic W–N bond distances of 2.37 and 2.35 Å (isomers not observed from photolysis) for the 2-ampym and 4-ampym complexes, respectively. A W–(N-1) bond of 2.28 Å for this isomer of [W(CO)₅(4-ampym)] was calculated. All W–N bonds are near the 2.18–2.33 Å range (mean of 2.27±0.06) for [W(CO)₅L] (L=pyridine, piperidine, glycine, 1-(2-py)-1,2,4-triazole, [W(CO)₅CN]⁻, 5-MeU⁻).     

A review of the unique features of HDL apoproteins

The human plasma high density lipoproteins (HDL) are a heterogeneous ensemble of five proteins associated with both neutral and polar lipids. The sequences of all five proteins are known. ApoA-I and apoA-II are the major protein components; apoC-I, apoC-II and apoC-III are the minor protein components. All these apoproteins spontaneously recombine with phospholipids to give stable lipid-protein complexes and freely exchange between the two major HDL subclasses, HDL₂ and HDL₃. In addition, ApoC-I, apoC-II, and apoC-III exchange between HDL and very low density lipoproteins. Furthermore, certain HDL apoproteins are activators for plasma enzymes that are important in lipid metabolism. ApoA-I and apoC-I activate lecithin/cholesterol acyltransferase; apoC-II is an activator of lipoprotein lipase. The regions of apoC-I and apoC-II that are involved in the activation of these enzymes have been localized with synthetic peptides. Studies of synthetic and native fragments of apoA-II, apoC-I, apoC-II, and apoC-III as well as model lipid-binding peptides have identified specific regions with structural features common to lipid-binding proteins. These special properties, which include helical potential, sequences with a critical amphipathic length, and high hydrophobicity of the nonpolar side of the amphipathic helix, are the determinants of HDL structure and metabolism.