Continuous hydrolysis of olive oil by lipase in microporous hydrophobic membrane bioreactor

Continuous hydrolysis of olive oil byCandida cylindracea’s lipase was studied in a microporous hydrophobic membrane bioreactor. Olive oil and buffer solution, fed continuously through two compartments partitioned by membrane, caused reaction at the interface of lipase-adsorbed membrane and buffer solution. Fatty acid was obtained in a single phase without being mixed with components of other phases. At all mean residence times, countercurrent flow mode was superior to cocurrent one. The lipase was adsorbed onto the membrane, and its adsorption was suggested to be partially specific from the experiments with enzymes having various levels of purity. The percent hydrolysis depended hyperbolically on the interfacial enzyme concentration. The hydrolysis seemed to be limited by diffusion of fat or fatty acid through the micropores of the membrane at higher interfacial enzyme concentrations. The lipase was stabilized significantly by glycerol added to the buffer solution. Satisfactory performance of the membrane bioreactor was obtained in a longterm continuous operation which lasted for 24 days by feeding buffer-glycerol (18.0%) solution over the adsorbed lipase. The operational half-life of the adsorbed enzyme was 15 days at 40 C.     

Superconductivity in SrTa2S5

A strontium tantalum sulfide, SrTa₂S₅, has a hexagonal structure with lattice constants of a =3.32 and c=24.1 Å. With decreasing temperature the electrical resistivity decreases monotonically and exhibits an abrupt superconducting transition at 3.16 K (midpoint). The diamagnetic susceptibility is observed below T_c. The magnetic susceptibility is nearly independent of temperature above T_c and shows Pauli paramagnetism.     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

Thermal challenges in next generation electronic systems - summary of panel presentations and discussions

The presentations made, as well as the discussions, in the panels at the workshop, Thermal Challenges in Next Generation Electronic Systems (THERMES), are summarized in this paper. The panels dealt with diverse topics including thermal management roadmaps, microscale cooling systems, numerical modeling from the component to system levels, hardware for future high performance and Internet computing architectures, and transport issues in the manufacturing of electronic packages. The focus of the panels was to identify barriers to further progress in each area that require the attention of the research community.     

Effects of Annealing on Dielectric Loss and Microstructure of Aluminum Nitride Ceramics

The effect of annealing on tan δ and microstructures of aluminum nitride (AlN) ceramics were explored. Yttria was added as a sintering additive to AlN powders, and the powders were pressureless-sintered at 1900°C for 2 h in a nitrogen flow atmosphere. In succession to sintering, AlN samples were annealed at 720, 970 and 1210°C for 2 and 4 h. Very low tan δ values between 2.6 and 6.0 × 10⁻⁴ at 28 GHz were obtained when the AlN samples were annealed for 4 h at all the annealing temperatures.     

In-situ monitoring of the stabilization with hydrogen of free radicals thermally induced from coal using high pressure e.s.r., d.t.a. and p.d.a. equipment

High temperature, high pressure e.s.r. measurements of the hydrogenation reaction of Taiheiyo coal in the presence of catalysts were carried out to understand the stabilization of thermally and/or catalytically induced free radicals. A decrease in free radical concentration with increasing temperature was observed for ZnCl₂ and SnCl₂ · 2H₂O catalysts at 10MPa under hydrogen gas. High pressure modified single-cell d.t.a. and p.d.a. equipment augmented the uniquely designed high temperature, high pressure e.s.r. cell. The hydrogenation reaction was monitored under the same experimental conditions as for e.s.r. From the results of the combination of high temperature, high pressure e.s.r. with high pressure d.t.a. and p.d.a., it was established that H₂ molecules can react efficiently with free radicals from coal molecules created by the presence of ZnCl₂ and SnCl₂ · 2H₂O catalysts.     

Face detection based on skin color likelihood

We propose a face detection method based on skin color likelihood via a boosting algorithm which emphasizes skin color information while deemphasizing non-skin color information. A stochastic model is adapted to compute the similarity between a color region and the skin color. Both Haar-like features and Local Binary Pattern (LBP) features are utilized to build a cascaded classifier. The boosted classifier is implemented based on skin color emphasis to localize the face region from a color image. Based on our experiments, the proposed method shows good tolerance to face pose variation and complex background with significant improvements over classical boosting-based classifiers in terms of total error rate performance.     

Effect of dispersity on the Tll (>Tg) transition in polystyrene

The presence of a high temperature (>T_g) relaxation in amorphous polystyrene has been investigated further. In the previous work,¹ the techniques of differential thermal analysis (DTA) and torsional braid analysis (TBA) were employed to study polystyrene as a function of “monodisperse” molecular weight. The occurrence of the T_ll transition appeared to be associated with the attainment of a critical viscosity level with also corresponded with a free volume level. An entanglement network developed at a critical value of molecular weight, M_c, giving a break in the T_ll-versus-M plots. The present work deals with the influence of dispersity on the T_ll transition, below and above M_c. A series of binary blends of “monodisperse” anionically polymerized polystyrenes with systematic changes in M?_n and heterogeneity index (M?_w/M?_n) was tested by TBA. The results show that when both components have molecular weights below M_c, single and average values of T_g and T_ll are observed which are linearly related to M?_n^?1, as predicted by free volume arguments. Although a single T_g is observed when one component has a molecular weight above and the other has a molecular weight below M_c, the components appear to undergo the T_ll relaxation independently. The results indicate that both the glass transition and the T_ll transition are basically governed by the same type of molecular motion but at different length ranges.     

Metal Dusting of Fe–Cr and Fe–Ni–Cr Alloys Under Cyclic Conditions

Metal dusting is the disintegration of alloys into carbon and metal particles during high-temperature exposure to carbon-bearing gases. Model Fe–Cr and Fe–Ni–Cr alloys were studied to test the hypothesis that M₃C formation is necessary for metal dusting to occur. The alloys were exposed to a 68% CO–26% H₂–6% H₂O gas mixture at 680°C (a_c=2.9) under thermal cycling conditions. Equilibrium calculations predicted the formation of M₃C at the surface of Fe–25Cr, but not Fe–60Cr. All compositions were expressed in w/o, weight percent. Alloys of Fe–25Cr with 2.5, 5, 10, and 25 w/o nickel additions were also exposed to the same conditions to study the role of nickel in destabilizing the precipitation of M₃C and, hence, altering the resistance to metal dusting. Metal dusting was observed on all the alloys except Fe–60Cr. For Fe–25Cr, Fe–25Cr–2.5Ni, and Fe–25Cr–5Ni, the carbonization and dusting process was localized, and its incidence decreased in Fe–25Cr–2.5Ni, consistent with the increased destabilization of M₃C precipitation. However, Fe–25Cr–10Ni and Fe–25Cr–25Ni both underwent extensive dusting in the absence of protective Cr₂O₃ formation. The carbon deposits formed consisted of carbon filaments, which contained particles at their tips. These were shown by electron diffraction to be exclusively Fe₃C in Fe–25Cr, Fe–25Cr–2.5Ni, and Fe–25Cr–5Ni, and a mixture of austenite and (Fe,Ni)₃C in Fe–25Cr–10Ni and Fe–25Cr–25Ni.     

Object tracking based on an online learning network with total error rate minimization

This paper presents a visual object tracking system which is tolerant to external imaging factors such as illumination, scale, rotation, occlusion and background changes. Specifically, an integration of an online version of total-error-rate minimization based projection network with an observation model of particle filter is proposed to effectively distinguish between the target object and the background. A re-weighting technique is proposed to stabilize the sampling of particle filter for stochastic propagation. For self-adaptation, an automatic updating scheme and extraction of training samples are proposed to adjust to system changes online. Our qualitative and quantitative experiments on 16 public video sequences show convincing performances in terms of tracking accuracy and computational efficiency over competing state-of-the-art algorithms.