Continuous hydrolysis of olive oil by lipase in microporous hydrophobic membrane bioreactor

Continuous hydrolysis of olive oil byCandida cylindracea’s lipase was studied in a microporous hydrophobic membrane bioreactor. Olive oil and buffer solution, fed continuously through two compartments partitioned by membrane, caused reaction at the interface of lipase-adsorbed membrane and buffer solution. Fatty acid was obtained in a single phase without being mixed with components of other phases. At all mean residence times, countercurrent flow mode was superior to cocurrent one. The lipase was adsorbed onto the membrane, and its adsorption was suggested to be partially specific from the experiments with enzymes having various levels of purity. The percent hydrolysis depended hyperbolically on the interfacial enzyme concentration. The hydrolysis seemed to be limited by diffusion of fat or fatty acid through the micropores of the membrane at higher interfacial enzyme concentrations. The lipase was stabilized significantly by glycerol added to the buffer solution. Satisfactory performance of the membrane bioreactor was obtained in a longterm continuous operation which lasted for 24 days by feeding buffer-glycerol (18.0%) solution over the adsorbed lipase. The operational half-life of the adsorbed enzyme was 15 days at 40 C.     

An automatic torque ripple compensation system for direct drive motors

A serious problem in motion control is the occurrence of torque ripple. Since a direct drive (DD) motor with a magnet rotor uses a rare-earth magnet, the torque ripple is more serious than that of conventional servomotors. This paper presents an auto-compensation of torque ripple using a software-implemented torque observer. The frequency and amplitude of torque ripple can be obtained in the controller by using the estimated torque from an observer, and the autonomous generation of a compensating current component for a torque ripple is possible. The proposed algorithm has been verified by experiments.     

Separation of di- and tripeptides with solvent extraction and an emulsion liquid membrane

The extraction equilibria of various di- and tripeptides with di-2-ethylhexylphosphoric acid (D2EHPA) were studied at low pH values. The complex extracted to organic phase consisted of one molecule of peptide and two molecules of D2EHPA dimer. The extraction constants of the peptides correlated well with the distribution coefficients of peptides between 1-octanol and water, which is a measure of hydrophobicity. The permeation rates of peptides through an emulsion liquid membrane were examined by using D2EHPA as a carrier, Span 80 as an emulsifier and kerosene as a diluent. The rates varied considerably with peptide type, depending upon the hydrophobicity.     

Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

Forming mental models in learning operating procedures for terminalequipment

People faced with an unfamiliar product or service tend to fall back on mental models based on analogical relationships with familiar products or services. Two experiments on the analogical relationships or metaphors that people might use when operating a communications terminal are described. In the first experiment, the role previously acquired operating knowledge has in determining the mental models people use when directory dialing with novel equipment is examined. In a second experiment, it is shown that an explicit appeal to an analogy between conventional mail and electronic mail can help users learn to use an electronic mail system, and make it easier for them to remember how to use the system as long as 90 days after initial exposure. It is concluded that the mental model is constructed only from the user's operating knowledge acquired as a result of past experiences, and the metaphor method is effective when the instructions are metaphorically taught     

Using precise data sets on farming and pesticide properties to verify a diffuse pollution hydrological model for predicting pesticide concentration.

Verification of a diffuse pollution model involves comparing results actually observed with those predicted by precise model inputs. Acquisition of precise model inputs is, however, problematic. In particular, when the target catchment is large and substantial estimation uncertainty exists, not only model verification but also prediction is difficult. Therefore, in this study, rice-farming data were collected for all paddy fields from all farmers in a catchment and pesticide adsorption and degradation rates in paddy field soil samples were measured to obtain precise model inputs. The model inputs successfully verified the model's capability to predict pesticide concentrations in river water. Sensitivity analyses of the model inputs elucidated the processes significantly affecting pesticide runoff from rice farms. Pesticide adsorption and degradation rates of the soil did not significantly affect pesticide concentrations, although pesticide discharge to river water accounted for less than 50% of the total quantity of pesticide applied to fields, possibly owing to pesticide adsorption and degradation. The timing of increases in pesticide concentrations in river water was affected mostly by the farming schedule, including the time of pesticide application and irrigation, and secondarily by rainfall events.     

A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.     

The Gmicro/500 superscalar microprocessor with branch buffers

The Gmicro/500, which features a RISC-like dual-pipeline structure for high-speed execution of basic instructions and represents a significant advance for the TRON architecture, is presented. Upwardly-object-compatible with earlier members of the Gmicro series, this microprocessor uses resident dedicated branch buffers to greatly enhance branch instruction execution speed. Its microprograms simultaneously use dual execution blocks to execute high-level language instructions effectively. Fabricated with a 0.6-μm CMOS technology on a 10.9-mm×16-mm die, the chip operates at 50/66 MHz and achieves a processing rate of 100/132 MIPS     

Studies on syntheses and permeabilities of special polymer membranes. XVI. Permeation and separation characteristics of aqueous polymer solutions for acrylonitrile-styrene copolymer membranes

The permeation and separation characteristics of aqueous polymer solutions using acrylonitrile-styrene copolymer membranes were investigated under various conditions. The membranes obtained from dimethyl sulfoxide solution of acrylonitrile-styrene copolymer have not a sufficient reproducibility and stability of permeation. These lacks were improved by adding ethylene glycol or glycerol to the casting solution and treating the membranes with pressure. The permeation and separation characteristics were influenced significantly by the additional amount of above additives, the heat treatment temperature, and the operating pressure. It was found that the concentration polarization of poly(vinyl alcohol) molecules onto the surface of the acrylonitrile-styrene copolymer membranes is smaller than that onto hydrophilic polymer membranes such as membranes of cellulose acetate, cellulose nitrate, and nylon 12, etc. Moreover, the acrylonitrile-styrene copolymer membranes show better performance for separation and concentrating of aqueous polymer solutions than hydrophilic membranes.