Lyme disease (Lyme borreliosis)

Unlike the peripheral nervous system (PNS), the mammalian central nervous system (CNS) clearly lacks the robust regenerative characteristics and capacity of the former. Despite this fact, two unique regions of the adult mammalian CNS possess such regenerative potential and are capable of active regeneration following injury or structural compromise. These unique areas are the olfactory system and the neurohypophyseal system of the endocrine hypothalamus. Furthermore, it has been clearly demonstrated that primordial neuroblasts regarded as stem cells emerge from the subependymal parenchyma of the walls and floor of the third cerebral ventricle, migrate to the ventricular surface and undergo compensatory synaptogenesis within one week following hypophysectomy. In situ hybridization studies have unequivocally demonstrated that the up-regulation of nitric oxide synthase (NOS) is essential for neural (axonal) regeneration and neuronal (stem cell) migration to occur. Moreover, neuronal migration is reliably inhibited following the administration of the NO antagonist, nitroarginine. The current investigation serves to confirm a remarkable degree of plasticity and regeneration in the adult mammalian neurohypophyseal system coupled with the emergence of primordial neuroblasts that undergo apparent differentiation, migration and compensatory synaptogenesis in response to the up-regulation of NO that occurs following the trauma of hypophysectomy. Evidence from the current investigation appears to confirm that specialized glia of the neurohypophyseal system, the so-called pituicyte, proliferate following hypophysectomy and may serve as a growth matrix or structural template that may target and direct regenerating Supraoptic (SON) and Paraventricular (PVN) axons toward endothelial primordia in the regenerating neural stem and lobe.     

Separation of di- and tripeptides with solvent extraction and an emulsion liquid membrane

The extraction equilibria of various di- and tripeptides with di-2-ethylhexylphosphoric acid (D2EHPA) were studied at low pH values. The complex extracted to organic phase consisted of one molecule of peptide and two molecules of D2EHPA dimer. The extraction constants of the peptides correlated well with the distribution coefficients of peptides between 1-octanol and water, which is a measure of hydrophobicity. The permeation rates of peptides through an emulsion liquid membrane were examined by using D2EHPA as a carrier, Span 80 as an emulsifier and kerosene as a diluent. The rates varied considerably with peptide type, depending upon the hydrophobicity.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.     

Synthesis and properties of N,N'-unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s

N,N'- Unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s (in which alkyl = methyl, ethyl, propyl, butyl, isobutyl, pentyl, hexyl and octyl) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with the appropriate alkyl-amines. The properties of these derivatives as pigments were tested and their thermal stability measured.     

Synthesis and properties of N-alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide)

N′-Alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide) (alkyl = isobutyl, pentyl, hexyl, octyl, etc.; aryl = phenyl, p-tolyl, p-methoxyphenyl, etc.) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with arylamines (aniline, p-toluidine, p-anisidine, o-phenylenediamine, etc.). The properties of these derivatives as pigments were tested, and also the thermal stability of 3,4:9,10-perylenebis(dicarboximide) derivatives was measured.     

Ozone Generator with Cylindrical Type of Rotating Electrode

An ozone generator using a rotating electrode to improve ozone generation efficiency is proposed. The ozone generator electrode unit consists of a rotating electrode and fixed electrode. The rotating electrode has the grounded 36 pieces of tungsten wires fixed in parallel to the rotation axis on the rotating cylinder surface. A dielectric electrode is used as a fixed electrode located on the inside of the tube of the electrode unit. The width of the apparent discharge gap is 1mm. Alternating current with a frequency of 50 Hz is applied to the electrode unit. The rotation speed can be adjusted from 0 rpm to 1200 rpm by a variable speed motor. Oxygen gas is used as the material gas. Higher ozone concentration and higher ozone generation efficiency are obtained compared with that when the rotation speed is 0 rpm. The gas temperature is measured at the inlet and outlet of the ozone generator, and the rotation speed for the cooling effect is most effective at about 500 rpm. The maximum generation efficiency is estimated to be 61 g/kWh at 800 rpm, and this value is twice as large as in the case of 0 rpm.     

Electrochemical formation of Sm-Co alloys by codeposition of Sm and Co in a molten LiCl-KCl-SmCl3-CoCl2 system

Electrocodeposition of Sm and Co on a Cu substrate was investigated in a molten LiCl-KCl-SmCl₃ (0.5 mol.%)-CoCl₂ (0.1 mol.%) system at 723 K. Phase of the deposited Sm-Co alloys could be controlled by electrolysis potential. SmCo₃ was formed on a Cu substrate by potentiostatic electrolysis in the potential range of 0.20-0.90 V (vs. Li⁺/Li). Sm₂Co₁₇ was obtained in the potential range of 0.90-1.50 V.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Emerging From the Cocoon? Revisiting the Tele‐Cocooning Hypothesis in the Smartphone Era

The tele‐cocooning hypothesis posits that mobile communication increases interaction with communication rich ties, while simultaneously weakening interaction with communication weak ties. In this study, we demonstrate how smartphones can be used to mitigate tele‐cocooning behavior by stimulating interaction with communication weak ties. Using a smartphone application to collect non‐identifying mobile communication log data, we conducted a field experiment with 193 Japanese participants. The treatment consisted of onscreen reminders designed to stimulate interaction with communication weak ties. The results indicate that the treatment promoted the activation of communication weak ties and the acquisition of information through those ties, suggesting that smartphones can be utilized to promote access to social capital.