Cytotoxic T lymphocyte activity after intravitreal inoculation of herpes simplex virus type I in mice

After inoculating mice with herpes simplex virus (HSV) by a corneal or intravitreal route, cytotoxic T lymphocyte (CTL) activity in the cervical lymph nodes and spleen was assayed. The spleen and cervical lymph nodes were removed at various points till 2 weeks after inoculation, and CTL activity was assayed in a groups: (A) mice intravitreally inoculated with HSV, and (B) mice with topical application of HSV. The reactivity of delayed type sensitivity was determined by the thickness of the mouse ear pinna on the 6th day in both groups. CTL activity in the spleen was at the same level in both groups. Up to 10 days after inoculation CTL activity in the cervical lymph nodes in group (A) was lower than in group (B). The reactivity of delayed type sensitivity in group (A) was lower than in group (B). These results indicate that an anterior chamber associated immune deviation (ACAID)-like phenomenon occurred after HSV inoculation into the vitreous cavity.     

Distance metric learning for graph structured data

Machine Learning - Graphs are versatile tools for representing structured data. As a result, a variety of machine learning methods have been studied for graph data analysis. Although many such...     

Molecular aggregation of PEEK with PES blends and the block copolymers composed of PEEK and PES components

Polymer blends of PEEK with PES were prepared by the solution blending method. Copolymers composed of PEEK and PES components were synthesized from these oligomers. The formation conditions exerted an influence over the molecular aggregation and the crystallization behaviors of the blend films and block copolymers which were examined by X-ray diffractometry and DSC analysis. As a result, phase-separation in the blend films was found when the formation temperature was high. The blend films formed at 340°C, quenched and annealed at 180°C, exhibited the same crystallization behavior as those of PEEK. In the case of the blend films formed at 300°C, the annealing of the films at 250°C was required to crystallize the blend films. The T_g of a copolymer with a PEEK component content of more than 50% tends to shift toward a higher temperature than the T_g of PEEK itself, and the T_m of the copolymer toward a lower temperature than that of PEEK ist.     

Preparation of porous carbons from thermoplastic precursors and their performance for electric double layer capacitors

Porous carbons with high surface area were successfully prepared from thermoplastic precursors, such as poly(vinyl alcohol) (PVA), hydroxyl propyl cellulose and poly(ethylene terephthalate), by the carbonization of a mixture with MgO at 900 °C in an inert atmosphere. After carbonization the MgO was dissolved out using a diluted sulfuric acid and the carbons formed were isolated. The mixing of the PVA carbon precursor with the MgO precursors (reagent grade MgO, magnesium acetate or citrate) was done either in powder form or in an aqueous solution. The BET surface area of the carbons obtained via solution mixing could reach a very high value, such as 2000 m²/g, without any activation process. The pore structure of the resultant carbons was found to depend strongly on the mixing method; the carbons prepared via solution mixing were rich in mesopores, but those produced via powder mixing were rich in micropores. The size of mesopores was found to be almost the same as that of the MgO particles, suggesting a way of controlling the mesopore size in the resultant carbons. Measurement of capacitance was carried out in 1 mol/L H₂SO₄ electrolyte. The porous carbon with a BET surface area of 1900 m²/g prepared at 900 °C through solution mixing of Mg acetate with PVA showed a fairly high EDLC capacitance, about 250 F/g with a current density of 20 mA/g and 210 F/g with 1000 mA/g. The rate performance was closely related to the mesoporous surface area.     

Microstructural Analysis and Photocatalytic Activity of Plasma-Sprayed Titania-Hydroxyapatite Coatings

Hydroxyapatite (HAp Ca₁₀(PO₄)₆(OH)₂) is known to be a biomaterial and an adsorbent for chromatography. In this study, HAp was agglomerated with anatase TiO₂ to manufacture thermal-spray powders to improve the adsorption activity of TiO₂, and then to improve its photocatalytic activity. The microstructures, compositions and photocatalytic activity of plasma-sprayed TiO₂, TiO₂-10%HAp, TiO₂-30%HAp, and HAp coatings were investigated. Due to the low thermal conductivity of HAp compound, not all HAp particles fully melted even under the arc current of 800 A. The addition of HAp inhibited the phase transformation of anatase TiO₂ to rutile. Under the arc current of 600 A, the anatase content in the TiO₂, TiO₂-10%HAp and TiO₂-30%HAp coatings was 11, 20 and 42%, respectively. With the increasing of the spraying distance from 70 to 110 mm, the anatase content in the TiO₂-30%HAp coatings decreased from 34 to 17% under arc current of 700 A. Furthermore, a slight decomposition of HAp to α-Ca₃(PO₄)₂ was found in the TiO₂-30%HAp coatings, it did not decompose to CaO and P₂O₅ according to the XRD and EDAX analysis. The addition of the secondary gas of helium had no significant influence on the melting state of the TiO₂-HAp feedstock powders. Moreover, the HAp in the TiO₂-10%HAp and TiO₂-30%HAp coatings had adsorption characteristic to acetaldehyde. The photocatalytic activity of TiO₂-10%HAp coating was highest among TiO₂, TiO₂-10%HAp, and TiO₂-30%HAp coatings sprayed under the arc current of 600 A for the optimum adsorption property and anatase content. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

500-fps face tracking system

In this paper, we propose a high-speed vision system that can be applied to real-time face tracking at 500 fps using GPU acceleration of a boosting-based face tracking algorithm. By assuming a small image displacement between frames, which is a property of high-frame rate vision, we develop an improved boosting-based face tracking algorithm for fast face tracking by enhancing the Viola–Jones face detector. In the improved algorithm, face detection can be efficiently accelerated by reducing the number of window searches for Haar-like features, and the tracked face pattern can be localized pixel-wise even when the window is sparsely scanned for a larger face pattern by introducing skin color extraction in the boosting-based face detector. The improved boosting-based face tracking algorithm is implemented on a GPU-based high-speed vision platform, and face tracking can be executed in real time at 500 fps for an 8-bit color image of 512 × 512 pixels. In order to verify the effectiveness of the developed face tracking system, we install it on a two-axis mechanical active vision system and perform several experiments for tracking face patterns.     

Temperature-controlled molecular dynamics study on velocity-dependent threshold behavior of dynamic nano-friction

Laws of dynamic nano-friction (i.e., continuous wearless friction) were searched for under steady spatial distributions of the local quasi-temperature, by molecular dynamics (MD) simulations. The temperature control of the non-conservative model was carried out by extending the isothermal MD method using the Nosé–Poincaré thermostat. The results suggested that the threshold phenomenon characterizes sliding-velocity dependence of the nano-frictional force between crystal lattices constituting a nano-electromechanical system (NEMS). This phenomenon was turned out to be a universal feature, whether heat transfer to the environment exists or not.     

Masking model for accurate colorimetric characterization of LCD

Abstract— A color management system (CMS) such as ICC profile or sRGB space have been proposed for color transformation and reproduction of cross media. In such a CMS, accurate colorimetric characterization of a display device plays a critical role in achieving device‐independent color reproduction. In the case of a CRT, colorimetric characterization based on a GOG model is accurate enough for this purpose. However, there is no effective counterpart in liquid‐crystal displays (LCDs) since the characterization of an LCD has many difficulties, such as channel interaction and non‐constancy of channel chromaticity. In this paper, a new method of display characterization is proposed which is applicable to the assessment of color reproduction of LCDs. The proposed method characterizes an electro‐optical transfer function considering both channel interaction and non‐constancy of channel chromaticity. Experimental results show that the proposed method is very effective in the colorimetry of LCDs.