Changes in the gaseous H2S barrier properties of damaged silicate coated nylon 6 films

The damage imposed on SiO _x deposited nylon 6 films as a result of abrasion with a cotton cloth and Gelboflex testing was examined by evaluating the rate at which copper plates, which were enveloped by the damaged films, were corroded by H₂S. Abrasion with a cotton cloth caused some micro-cracking of the SiO _x layer and the permeation rate of H₂S approached that of the uncoated nylon 6 film. Damage to the SiO _x layer by twisting and crushing progressed gradually with the number of Gelboflex test cycles and correspondingly the corrosion rate of the copper plates increased. Comparison of the corrosion rates of the copper plates kept in the pouches made of various commercial films with those obtained for the damaged SiO _x deposited nylon 6 films showed a clear relationship between the H₂ permeation rate of the films and the corrosion rate of the copper plates by H₂S.     

Continuous hydrolysis of olive oil by lipase in microporous hydrophobic membrane bioreactor

Continuous hydrolysis of olive oil byCandida cylindracea’s lipase was studied in a microporous hydrophobic membrane bioreactor. Olive oil and buffer solution, fed continuously through two compartments partitioned by membrane, caused reaction at the interface of lipase-adsorbed membrane and buffer solution. Fatty acid was obtained in a single phase without being mixed with components of other phases. At all mean residence times, countercurrent flow mode was superior to cocurrent one. The lipase was adsorbed onto the membrane, and its adsorption was suggested to be partially specific from the experiments with enzymes having various levels of purity. The percent hydrolysis depended hyperbolically on the interfacial enzyme concentration. The hydrolysis seemed to be limited by diffusion of fat or fatty acid through the micropores of the membrane at higher interfacial enzyme concentrations. The lipase was stabilized significantly by glycerol added to the buffer solution. Satisfactory performance of the membrane bioreactor was obtained in a longterm continuous operation which lasted for 24 days by feeding buffer-glycerol (18.0%) solution over the adsorbed lipase. The operational half-life of the adsorbed enzyme was 15 days at 40 C.     

Westernized food habits and concentrations of serum lipids in the Japanese

It has recently been reported that there exists a new 'RING-finger' protein family among the zinc-finger (Zf) proteins. Previously, we had isolated the mouse Mel-18 cDNA (mMel-18) encoding the nuclear RING-finger protein that exhibits an ability to bind to a nonspecific DNA column. Here, we have isolated and characterized the human Mel-18 cDNA (hMel-18) using the mMel-18 cDNA as a probe. The deduced hMel-18 protein contains 344 amino acids (38 kDa) with a RING-finger motif, a helix-loop-helix (HLH)-like structure and a Pro/Ser-rich region. The hMel-18 gene is conserved among vertebrates. Its mRNA is highly expressed in placenta, lung and kidney, but the level is low in liver, pancreas and skeletal muscle. Using in situ hybridization, we mapped hMel-18 to band q22 of chromosome 12. It is possible that the Mel-18/bmi-1 gene family represents a mammalian homologue of the Drosophila polycomb gene group.     

Finite element analysis of the transient motion of stratified viscous fluids under gravity

The present paper deals with the finite element analysis of two-dimensional two-layer density flows in a gravitational field. A fluid in each layer is replaced with a large number of discrete particles, and the motion and deformation of each layer is represented by moving those particles in a Lagrangian manner. The velocity distribution in the whole fluid region is given as the finite element solution of the Navier-Stokes equations and the equation of continuity. In the finite element calculation, free-slip conditions are used on solid wall boundaries because no-slip conditions may cause sticking of some particles to walls. Then, a new technique for the implementation of free-slip conditions on arbitrary curved boundaries is presented. As numerical examples, density flows in a rectangular closed container and Rayleigh-Taylor instability in the container with a circular cross-section have been computed.     

Metabolism of tetramethrin isomers in rat: IV. Tissues responsible for formation of reduced and hydrated metabolites

1. To identify the sites of formation of the reduced metabolites, 3-hydroxy-cyclohexane-1,2-dicarboximide (3-OH-HPI-1 and -2), 1,2-cyclohexanedicarboxylic acid (TCDA) and 1-hydroxy-1,2-cyclohexanedicarboxylic acid (1-OH-HPA), in rat treated with 14C-labelled (1RS, trans)-tetramethrin, [3,4,5,6-tetrahydrophthalimidomethyl (1RS, trans)-chrysanthemate], bile-duct cannulated animals were orally or intravenously administered 14C-labelled 3,4,5,6-tetrahydrophthalimide (TPI) or 3,4,5,6-tetrahydrophthalic acid (THPA), precursors of these metabolites, and bile, urine and faeces were collected for analysis. 2. 3-OH-HPI-1 and 3-OH-HPI-2, which are cis-form reduced metabolites, and 1-OH-HPA were detected in bile and urine samples of the bile-cannulated rat treated intravenously and orally with 14C-labelled TPI, indicating their formation in tissues or blood. TCDA, a trans-form reduced metabolite, was not detected in bile, urine or faeces of the bile-cannulated rat treated intravenously with 14C-THPA, but was found in the faeces after oral application, indicating formation in the gastrointestinal tract. 3. To clarify whether 1-OH-HPA is produced from THPA via TCDA (hydroxylation via reduction) or by direct addition of H2O to its double bond (hydration), rats were orally administered 14C-labelled TCDA, and metabolites in urine and faeces were analysed. The observed lack of 1-OH-HPA indicated formation by direct addition of H2O to the double-bond of THPA. 4. To specify which tissues form reduced and hydrated metabolites, in vitro metabolism studies were carried out. Reduction to the cis-form was found to take place in blood cells, reduction to the trans-form took place in the gastrointestinal tract contents, and hydration took place in the liver and the intestinal tract contents.     

Recent development in NRD-guide technology

Recent achievements in the field of the NRD-guide integrated circuits and antennas are reviewed. The main emphasis is placed on a new class of planar antennas which employ a leaky NRD-guide as the feed medium and can be contained in a common housing together with the NRD-guide integrated circuits.     

Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

Effect of strain rate on microstructural change in deformation of the ultrafine grained (UFG) aluminum produced by severe plastic deformation (SPD) was studied. Commercial purity 1100 aluminum sheets were highly strained up to an equivalent strain of 4.8 by the Accumulative Roll-Bonding (ARB) process at ambient temperature. The ARB-processed sheets were found to be filled with pancake-shaped ultrafine grains surrounded by high-angle grain boundaries. The ultrafine grains had a mean grain thickness of 200 nm and a mean grain length of 1100 nm. The ultrafine-grained aluminum sheets were deformed at various strain rates ranging from 2 to 6.0×10⁴ s⁻¹ by conventional rolling, ultra-high-speed rolling, and impact compression. High-speed plastic deformation generates a large amount of heat, inducing coarsening of the ultrafine grains during and after deformation. On the other hand, it was also suggested that high-speed plastic deformation is effective for grain-subdivision, in other words, ultra-grain refinement, if the effect of heat generation is extracted.     

An empirical approach for structure-based prediction of carbohydrate-binding sites on proteins

A computer program system was developed to predict carbohydrate-bindingsites on three-dimensional (3D) protein structures. The programssearch for binding sites by referring to the empirical rulesderived from the known 3D structures of carbohydrate–proteincomplexes. A total of 80 non-redundant carbohydrate–proteincomplex structures were selected from the Protein Data Bankfor the empirical rule construction. The performance of theprediction system was tested on 50 known complex structuresto determine whether the system could detect the known bindingsites. The known monosaccharide-binding sites were detectedamong the best three predictions in 59% of the cases, whichcovered 69% of the polysaccharide-binding sites in the targetproteins, when the performance was evaluated by the overlapbetween residue patches of predicted and known binding sites. Received April 24, 2003; revised June 2, 2003; accepted June 10, 2003.     

Vivid image projection system using e‐Paper active screen

Projected image on a screen is not always vivid enough when it is projected in a bright room. We generally have to choose either vivid image in a dark room or dull image in a bright room. We have suggested a new projection system which can realize high contrast image projection in a bright room. It is consisted of electronic paper screen, projector, and light‐emitting diode room light. The electronic paper (e‐Paper) screen alternates its whole surface white/black with 120 Hz. Room lights are controlled with the same frequency of 120 Hz with the opposite phase as that of the e‐Paper screen. We have confirmed that our new system has achieved higher contrast than the conventional projection system and also enough readability of paper documents in the room simultaneously. We have thus confirmed that our new system can bring an ideal condition, for audience, which can realize a vivid image projection in a bright room.