Concomitant Crystallization of Copper(II) Sachharinato Complexes with 2-methylpyrazine as a Monomer and an One-dimensional Polymer: Syntheses,Crystal Structures,Spectroscopic and Thermal Properties

The reaction of [Cu(sac)₂(H₂O)₄] · 2H₂O with 2-methylpyrazine (mpyz) leads two complexes, concomitant crystallization of a mononuclear complex [Cu(sac)₂(mpyz)(H₂O)₂] (1) and a polymeric complex [Cu(sac)₂(μ-mpyz)]_n (2). Both complexes have been characterized by elemental analyses, magnetic measurements, FT-IR and ESR, TG-DTA and single-crystal X-ray diffraction analyses. Single-crystal X-ray analyses show that complex 1 consists of discrete molecules in which the copper(II) ions exhibits a square-pyramidal coordination geometry. The individual molecules of 1 are connected into a hydrogen-bonded chain structure, which is further assembled to form a three-dimensional network by π–π stacking interactions. Complex 2 is an 1D coordination polymer in which copper(II) centers are bridged by the mpyz ligand. The chains are further assembled to form two-dimensional frameworks by π–π and C–H···π stacking interactions.     

Comparison on efficiency factors of F and C types of fly ashes

Fly ashes are obtained from thermal power plants and they are pozzolanic materials, which can act as partial replacement material for both portland cement and fine aggregate. With their economical advantages and potential for improving fresh and hardened concrete performance, they have some benefits for using in concrete industry. In this study, the objective was to find the efficiency factors of Turkish C and F-type fly ashes and to compare their properties. Three different cement dosages were used (260, 320, 400 kg/m³), two different ratios (10% and 17%) of cement reduced from the control concretes and three different ratios (depending on cement reduction ratio) of fly ash were added into the mixtures. At the ages of 28 and 90 days, compressive strength, modulus of elasticity and ultrasound velocity tests were carried out. From the compressive strength results, the k efficiency factors of C and F-type fly ashes were obtained. As a result, it is seen that efficiency factors of the concrete produced by the replacement of F and C type fly ashes with cement increase with the increase in cement dosage and concrete age.     

Stability analysis of social foraging swarms.

In this article we specify an M-member "individual-based" continuous time swarm model with individuals that move in an n-dimensional space according to an attractant/repellent or a nutrient profile. The motion of each individual is determined by three factors: i) attraction to the other individuals on long distances; ii) repulsion from the other individuals on short distances; and iii) attraction to the more favorable regions (or repulsion from the unfavorable regions) of the attractant/repellent profile. The emergent behavior of the swarm motion is the result of a balance between inter-individual interactions and the simultaneous interactions of the swarm members with their environment. We study the stability properties of the collective behavior of the swarm for different profiles and provide conditions for collective convergence to more favorable regions of the profile.     

Heat transfer enhancement in a tube using circular cross sectional rings separated from wall

A numerical study was undertaken for investigating the heat transfer enhancement in a tube with the circular cross sectional rings. The rings were inserted near the tube wall. Five different spacings between the rings were considered as p = d/2, p = d, p = 3d/2, p = 2d and p = 3d. Uniform heat flux was applied to the external surface of the tube and air was selected as working fluid. Numerical calculations were performed with FLUENT 6.1.22 code, in the range of Reynolds number 4475–43725. The results obtained from a smooth tube were compared with those from the studies in literature in order to validate the numerical method. Consequently, the variation of Nusselt number, friction factor and overall enhancement ratios for the tube with rings were presented and the best overall enhancement of 18% was achieved for Re = 15,600 for which the spacing between the rings is 3d.     

Experimental evaluation of different spectral methods for damage estimation of an electrical panel bracket mounted on a military wheeled vehicle

Journal of Mechanical Science and Technology - This study evaluates different frequency domain vibration fatigue methods by verifying the results of the analyses with the experimental data on the...     

Column Solid Phase Extraction of Copper and Nickel on Triethylenetetramine Bonded Silica Gel for their Atomic Absorption Spectrometric Determination

Abstract

A procedure for the preconcentration of Cu(II) and Ni(II) is proposed using a minicolumn filled with silica gel modified by triethylenetetramine. The retained analytes on the modified silica gel were eluted with hydrochloric acid solution. The metal ions in the eluate were determined by flame atomic absorption spectrometry. The effect of various factors, such as pH of the sample solution, sample volume, flow rate of the sample solution, type of eluent, and matrix content of the sample solution, on preconcentration were examined to obtain optimum conditions. The recoveries for Cu(II) and Ni(II) ions under optimum preconcentration conditions were 98.3±1.3 and 99.2±1.4% at 95% confidence level, respectively. The analytical detection limits of Ni and Cu were found to be 0.22 and 0.36 µg L^?1, respectively. The proposed method was applied to the determination copper and nickel in river and synthetic sea water.     

UMV control via FOSMO

Journal of Mechanical Science and Technology - In this work, the speed and direction angle of an unmanned vehicle (UMV) are controlled by using a sliding mode controller (SMC). However, no...     

Effect of salt crystallization on stones of historical buildings and monuments,Konya, Central Turkey

In this study, we investigated the chemical and physical properties of the volcanic rocks used as building stones in historical places and monuments. The chemical weathering effect of salt crystallization on these stones was measured on the laboratory conditions (in most cases, used samples were very small). For this purpose, the dry weight loss (DWL) test was conducted. The rocks of dacite, andesite and tuffs of volcanic origin have different durability against salt crystallization. The most stable rocks are dacites (DWL 2.06%) which were used in the construction of Hittite monuments at Eflatun. The durability of the stones is closely related to their chemical, mineralogical, petrographical and mechanical properties. The stones used in the historical buildings are generally much more stable than present-day building stones.