Investigation on the effectiveness of the repair method 8.3 “Corrosion protection by increasing the electrical resistivity” in chloride-containing concrete Part 2: Chloride redistribution in concrete after application of a system sealing surface protective coating

This DFG-funded research project aimed to gain a better understanding of the mechanisms of the W-Cl repair principle within the framework of fundamental investigations, to contribute to the creation of the necessary basis for a broader application of the repair principle in practice. The focus was on the development of a model to describe the chloride redistribution after the application of a system sealing surface protective coating. On the basis of Fick's second law of diffusion, a mathematical model with a self-contained analytical solution was developed, with the help of which the chloride redistribution after application of a system sealing surface protective coating can be calculated under the idealized assumption of complete water saturation of the concrete. Furthermore, the influence of the dehydration of the concrete, expected as a result of the application of the repair principle W-Cl, on the chloride redistribution was investigated. On the basis of laboratory tests and numerical simulations, material-specific reduction functions were developed to quantify the relationship between the chloride diffusion coefficient and the ambient humidity.     

Selective Analysis of Sulfur-Containing Species in a Heavy Crude Oil by Deuterium Labeling Reactions and Ultrahigh Resolution Mass Spectrometry

A heavy crude oil has been treated with deuterated alkylating reagents (CD₃I and C₂D₅I) and directly analyzed without any prior fractionation and chromatographic separation by high-field Orbitrap Fourier Transform Mass Spectrometry (FTMS) and Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) using electrospray ionization (ESI). The reaction of a polycyclic aromatic sulfur heterocycles (PASHs) dibenzothiophene (DBT), in the presence of silver tetrafluoroborate (AgBF₄) with ethyl iodide (C₂H₅I) in anhydrous dichloroethane (DCE) was optimized as a sample reaction to study heavy crude oil mixtures, and the reaction yield was monitored and determined by proton nuclear magnetic resonance spectroscopy (¹H-NMR). The obtained conditions were then applied to a mixture of standard aromatic CH-, N-, O- and S-containing compounds and then a heavy crude oil, and only sulfur-containing compounds were selectively alkylated. The deuterium labeled alkylating reagents, iodomethane-d₃ (CD₃I) and iodoethane-d₅ (C₂D₅I), were employed to the alkylation of heavy crude oil to selectively differentiate the tagged sulfur species from the original crude oil.     

一体化的信号源分析仪

与美国同行争分夺秒抢占市场先机不同,欧洲测量仪器厂商Rohde&Schwarz公司的产品策略则相对稳健,他们的产品更专注于功能的多样化     

Relationship between haemodynamics and morphology in pulmonary hypertension. A quantitative intravascular ultrasound study

BACKGROUND: Intravascular ultrasound imaging of the pulmonary arteries has been demonstrated to be a reliable method of quantifying vessel diameter, luminal area and pulsatility. Simultaneous measurement of flow velocity and its response to vasodilators allows the relationship between morphology and functional compromise to be studied, especially endothelial dysfunction. METHODS: In 51 patients (mean age = 49.8 +/- 12.6 years, 17 female) we performed right heart catheterization and simultaneous intravascular ultrasound of pulmonary artery branches. The patients were divided in two groups: group 1 with normal pulmonary artery pressure and pulmonary vascular resistance, and group 2 with pulmonary hypertension (peak pulmonary artery pressure > 30 mmHg and/or mean pulmonary artery pressure > 20 mmHg). Vessel wall and lumen were studied using a 2.9 F intravascular ultrasound catheter with a 30 MHz phased array transducer. Measurement of blood flow velocity was accomplished by a Doppler flow wire (0.018 inch). The maximal flow change during acetylcholine infusion (adjusted to 10(-6); 10(-5), and 10(-4) M concentration in the blood vessel) was measured. RESULTS: There were no significant differences between groups 1 and 2 with respect to age (48.5 +/- 14.3 years vs 50.3 +/- 12.3 years; P = ns), gender (4 female/8 male vs 13 female/26 male; P = ns), luminal area of the vessel segment in which the intravascular ultrasound measurements were obtained (11.8 +/- 6.1 mm2 vs 16.7 +/- 14.3 mm2; P = ns), internal diameter (3.9 +/- 1.2 mm vs 4.2 +/- 1.7 mm; P = ns), and external diameter (6.1 +/- 1.3 mm vs 6.9 +/- 2.1 mm; P = ns). Cross-sectional images of the pulmonary artery wall demonstrated a single ring with high echodensity with a thin inner layer regarded as intima in group 1. In contrast, the majority of patients (n = 35/39) in group 2 demonstrated a thickening of the intimal layer and/or a disturbance of layering of the echogenic arterial wall. The relative wall thickness was higher in group 2 than in group 1 (22.5 +/- 10.4% vs 15.3 +/- 6.5%; P < 0.05). There were no significant correlations between pulmonary artery pressure and wall thickness pulmonary artery pressure and area change in the cardiac cycle, acetylcholine-dependent increase in pulmonary flow and morphological changes in the vessel wall. CONCLUSION: We conclude that intravascular ultrasound is capable of detecting morphological changes in the pulmonary vessel wall in pulmonary hypertension and that vessel wall hypertrophy of small pulmonary segment arteries, as detected by intravascular ultrasound, is not predictive of functional vasodilatory response of resistance vessels of the same vessel area.     

Management of multidimensional discrete data

Spatial database management involves two main categories of data: vector and raster data. The former has received a lot of in-depth investigation; the latter still lacks a sound framework. Current DBMSs either regard raster data as pure byte sequences where the DBMS has no knowledge about the underlying semantics, or they do not complement array structures with storage mechanisms suitable for huge arrays, or they are designed as specialized systems with sophisticated imaging functionality, but no general database capabilities (e.g., a query language). Many types of array data will require database support in the future, notably 2-D images, audio data and general signal-time series (1-D), animations (3-D), static or time-variant voxel fields (3-D and 4-D), and the ISO/IEC PIKS (Programmer's Imaging Kernel System) BasicImage type (5-D). In this article, we propose a comprehensive support ofmultidimensional discrete data (MDD) in databases, including operations on arrays of arbitrary size over arbitrary data types. A set of requirements is developed, a small set of language constructs is proposed (based on a formal algebraic semantics), and a novel MDD architecture is outlined to provide the basis for efficient MDD query evaluation.     

Zur Verantwortung des Informatikers-Militärische Anwendungen der Informatik

Ohne Zusammenfassung     

Bauarten von Kristallisatoren

Types of crystallizers . In the industrial application of single mass crystallization from solution clear aims exist with regard to crystallizate qualities. To fulfil these aims, one can choose between various types of crystallizers. Magma types, i.e. agitated tank crystallizer, forced circulation and draft tube (baffle) crystallizer, as well as classifying types with the well-known Oslo-crystallizer belong to the present state of the art. The rates of secondary nucleation decrease in the same sequence as that given above and the possibilities of influencing crystal size distributions increase, and coarser crystals are produceable.