微合金钢热变形组织与性能演变的CA模拟

建立了预测微合金钢热变形奥氏体动态再结晶组织与性能演变的元胞自动机模型.采用基于位错密度的动态再结晶理论,主要考虑动态再结晶的形核、晶粒长大,实现对动态再结晶过程晶粒形态、体积分数及晶粒尺寸的定量化表征及其演变过程的可视化描述,获得了位错密度及流变应力等参数.模拟得到的动态再结晶组织形貌及基于位错密度变化计算出的流变应力与实验结果吻合较好.     

Millipede forming-a new metal forming approach

Millipede Forming is a novel metal forming method that has been proposed and developed recently.It can be applied to overcome fundamental limitations in conventional roll forming,and,in addition,used for incremental forging and integrated into a strip casting or extrusion process for downstream thickness reduction. In this new method,there are two main principles:①the use of an optimal transitional surface or space linking of the incoming material to the outgoing product,and②implementation of a method to...     

THR EFFECT OF OXIDE LAYER FORMATION ON THE ADHESION OF CONDUCTIVE POLYMER COATING TO A MILDSTEEL

１．ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｃｅｎｔｌｙ,ｔｈｅｒｅｈａｓｂｅｅｎａｎｕｐｓｕｒｇｅｏｆｉｎｔｅｒｅｓｔｉｎｔｈｅｐｒｅｖｅｎｔｉｏｎｏｆｃｏｒｒｏｓｉｏｎｏｆｓｔｅｅｌｔｈｒｏｕｇｈｔｈｅｕｓｅｏｆｃｏｎｄｕｃｔｉｖｅｐｏｌｙｍｅｒｃｏａｔｉｎｇｓ〔１〕．Ｕｎｆｏｒｔｕｎａｔｅｌｙ,ｐｏｏｒｃｏａｔｉｎｇａｄｈｅｓｉｖｅｄｕｒａｂｉｌｉｔｙ,ｗｈｉｃｈｈａｄｏｆｔｅｎｂｅｅｎｅｎｃｏｕｎｔｅｒｅｄｄｕｒｉｎｇｃｏａｔｉｎｇｅｍｐｌｏｉｅｄ,ｌｉｍｉｔｅｄｔｈｅａｐｐｌｉｃａｔｉｏｎｏｆｃｏ…     

Synthesis of Al_2O_3-SiC Composite and Its Effect on the Properties of Low-carbon MgO-C Refractories

Al2O3-SiC composite was synthesized with pyrophyllite and natural graphite as raw materials by carbothermal reduction reaction under argon atmosphere. The effect of synthesis temperature on phase composition and microstructure was investigated. Low-carbon MgO-C refractories were prepared by using the synthesized Al2O3-SiC composite as additive. The effect of its addition on the slag penetration and corrosion resistance as well as oxidation resistance of the refractories was investigated, and the slag resist...     

Optimization of pass schedule to improve the strip shape in hot strip rolling

In this study,the authors proposed a new algorism which can simultaneously meets the strip shape control criterion and the strip crown control criterion.Based on the new algorism,the pass schedule is optimized to maximize the allowable PC angle range.To calculate the objective value for optimization of pass schedule,a slab method has been integrated with the roll stack deformation to simulate the strip profile.     

空心聚吡咯/V_2O_5复合材料的制备及其电化学性能

为改善晶态V2O5（c-V2O5）正极材料实际容量较低、循环性能较差等问题,制备了空心球聚吡咯/V2O5复合材料。利用导电吡咯单体（Py）在中空型V2O5层间发生原位氧化聚合反应制备聚吡咯（PPy）/中空型V2O5复合材料（HS-PPy/V2O5）。采用X射线衍射仪（XRD）、扫描电镜（SEM）、透射电镜（TEM）对样品进行表征,采用恒流充放电测试和电化学阻抗（EIS）测试样品的电化学性能。结果表明,Py单体已插入中空型V2O5层间,与纯中空型V2O5相比,制备的HS-PPY/V2O5复合材料比容量虽然有所减小,但是循环稳定性有较大的提高。     

铁法矿区高瓦斯低透气性煤层群卸压煤层气抽采钻孔布置

基于铁法矿区高瓦斯低透气性煤层群地质及开采技术条件,采用物理模拟方法系统分析了煤层群不同开采顺序时采动裂隙演化特征,运用CFD（Computational Fluid Dynamics）Fluent分析了U型负压通风条件下采空区瓦斯流动规律,总结了铁法矿区卸压煤层气抽采钻孔布置原则。研究结果表明：回采巷道内侧约在工作面倾斜长度的1/3处为采动裂隙发育区、距回风巷30~80 m范围为高浓度瓦斯富集区。铁法矿区煤层气抽采钻孔布置的原则为：垂直方向上钻孔终孔位置布置在断裂带下1/3处、地面钻井的合理间距不小于100~150 m、沿工作面倾斜方向靠回风巷（1/3~1/2）工作面斜长范围为最佳的钻孔位置。     

Analysis of strip edge cracks during cold rolling of thin strip

In this paper,the mechanics of strip edge cracks and its propagation has been studied,and the effects of strip edge drop and stress intensity factor(SIF) on edge crack defections during cold rolling of thin strip have been discussed.An experimental investigation was presented into the effect of strip edge drop on edge cracks during cold rolling of thin strip.The edge crack increases significantly due to more inhomogeneous deformation and work hardening at the strip edge.The effective stress intensity fac...     

Breaking and Repairing Trapdoor-Free Group Signature Schemes from Asiacrypt'2004

Group signature schemes allow a member of a group to sign messages anonymously on behalf of the group. In case of later dispute, a designated group manager can revoke the anonymity and identify the originator of a signature. In Asiacrypt2004, Nguyen and Safavi-Naini proposed a group signature scheme that has a constant-sized public key and signature length, and more importantly, their group signature scheme does not require trapdoor. Their scheme is very efficient and the sizes of signatures are smaller than those of the other existing schemes. In this paper, we point out that Nguyen and Safavi-Naini's scheme is insecure. In particular, it is shown in our cryptanalysis of the scheme that it allows a non-member of the group to sign on behalf of the group. And the resulting signature convinces any third party that a member of the group has indeed generated such a signature, although none of the members has done so. Therefore is in case of dispute, even the group manager cannot identify who has signed the message. In the paper a new scheme that does not suffer from this problem is provided.