Iodine-123-BMIPP myocardial washout and cardiac work during exercise in normal and ischemic hearts

Due to the changes in the frequency of penicillin-resistant strains of S. pneumoniae, it is necessary to perform surveillance studies of bacterial resistance. Isolates from the upper respiratory tract of asymptomatic children have been useful. There is no information about the difference between isolates from children with and without upper respiratory tract infection (URTI). The objective of the authors in this paper is to establish the prevalence of carrier-state, serotype and antimicrobial resistance of S. pneumoniae isolates from children with and without acute upper respiratory tract infection (URTI) in a rural area in Mexico. A cross-sectional comparative study was performed in Tlaxcala, Mexico. Children from one month 5 years of age were included. Nasopharyngeal swabs were obtained. Identification was done by international microbiology standards. Serotyping was done by the capsular Quellung test. The susceptibility testing was performed by the agar dilution method. Four-hundred and fifty patients were included. S. pneumoniae was isolated in 134 children (29.7%). Frequency of carriers was greater in patients with URTI (107/323) than without URTI (27/127) (33.1% vs. 21.1% p = 0.012, OR 1.84, IC 95% 1.1-3.08). The six most frequent serotypes were: 6B (16.4%); 19F (11.9%); 19A (6.7%); 14, 23F, and 35 (5.2% each), with no difference among the groups. Only 3% of the strains had high level resistance to penicillin, and 12.6% had intermediate resistance, and for ampicillin 4%, amoxicillin 4%, amoxicillin-clavulanate 4%, ceftriaxone 3%, cefotaxime 1.5%, erythromycin 6%, miocamycin 3%, chloramphenicol 4%, and vancomycin 0%. Trimethoprim-sulfamethoxazole resistance was very high (42%). In conclusion, colonization is higher in children with URTI. Five of the most frequent serotypes identified in this study were the same as those identified in patients with S. pneumoniae invasive diseases in Mexico City. In Tlaxcala, Mexico, beta-lactams could be the drug of choice for the treatment of S. pneumoniae lower respiratory tract infections. It is necessary to perform clinical assays to evaluate the efficacy of trimethoprim-sulfamethoxazole due to the high resistance in vitro.     

Electrical characterization of homoepitaxial diamond p–n junction

Electrical properties of homoepitaxial diamond p–n⁺ junction of boron (B)-doped p-type layer and phosphorus-doped n-type layer on Ib (111) diamond single crystal have been characterized. Current–voltage characteristics show a clear rectifying property with rectification ratio of over 10⁵ at ± 10 V. From capacitance–voltage characteristics, it is found that a spatial distribution of space-charge density N_i of the p–n⁺ junction is not uniform and N_i at a middle region of the space-charge layer formed at zero bias voltage is higher than that of other region of the space-charge layer. This peculiar characteristic can be explained by superposition of two effects; one is the deep dopant effect due to B atoms in the p-type layer, which makes to reduce N_i at around the edge of the space-charge layer formed at zero bias voltage. The other is the compensation of B acceptors by impurity atoms diffusing during the p–n⁺ interface and incorporating during the growth of p-type layer, which makes to reduce N_i at the vicinity of the p–n⁺ interface.     

Analysis of distribution of Campylobacter jejuni and Campylobacter coli in broilers by using restriction fragment length polymorphism of flagellin gene

The incidence of Campylobacter jejuni and Campylobacter coli in broiler farms was 33.9% (19/56). C. jejuni-positive flocks accounted for 20.0% (17/85) and C. coli-positive ones was 4.7% (4/85). There were 14 patterns (fla type) of restriction fragment length polymorphism (RFLP) of flagellin A gene among these 22 strains of C. jejuni and C. coli including the standard strain C. jejuni ATCC 33560. Different fla types of Campylobacter were isolated from broilers in different growing cycles on the same farms. Four strains of C. jejuni were isolated from four breeder farms and four fla types of C. jejuni were detected from their progenies reared on growing farms. Three fla types of C. jejuni detected from the progenies were different from those of each breeder. Also, the other three fla types of C. jejuni were detected from different progenies of each growing farm during the next growing cycle. These findings indicate that the RFLP analysis may contribute to epidemiological studies of C. jejuni and C. coli contamination of broilers and suggest the risk of contamination with different types of Campylobacter in every growing cycle of broilers on the farm even on the same farm. They also supported that there was little likeliness of the vertical transmission of C. jejuni and C. coli from breeders to broilers.     

An automatic torque ripple compensation system for direct drive motors

A serious problem in motion control is the occurrence of torque ripple. Since a direct drive (DD) motor with a magnet rotor uses a rare-earth magnet, the torque ripple is more serious than that of conventional servomotors. This paper presents an auto-compensation of torque ripple using a software-implemented torque observer. The frequency and amplitude of torque ripple can be obtained in the controller by using the estimated torque from an observer, and the autonomous generation of a compensating current component for a torque ripple is possible. The proposed algorithm has been verified by experiments.     

An all-digital analog-to-digital converter with 12-/spl mu/V/LSB using moving-average filtering

A compact, high-resolution analog-to-digital converter (ADC) especially for sensors is presented. The basic structure is a completely digital circuit including a ring-delay-line with delay units (DUs), along with a frequency counter, latch, and encoder. The operating principles are: (1) the delay time of the DU is modulated by the analog-to-digital (A/D) conversion voltage and (2) the delay pulse passes through a number of DUs within a sampling (= integration) time and the number of DUs through which the delay pulse passes is output as conversion data. Compact size and high resolution were realized with an ADC having a circuit area of 0.45 mm/sup 2/ (0.8-/spl mu/m CMOS) and a resolution of 12 /spl mu/V (10 kS/s). Its nonlinearity is /spl plusmn/0.1% FS per 200-mV span (1.8-2.0 V), for 14-b resolution. Sample holds are unnecessary and a low-pass filter function removes high-frequency noise simultaneously with A/D conversion. Thus, the combination of this ADC and a digital filter that follows can eliminate an analog prefilter to prevent the aliasing before A/D conversion. Also, both this ADC can be shrunk and operated at low voltages, so it is an ideal means to lower the cost and power consumption. Drift errors can be easily compensated for by digital processing.     

Partial scan design and test sequence generation based on reduced scan shift method

This paper presents a partial scan algorithm, calledPARES (PartialscanAlgorithm based onREduced Scan shift), for designing partial scan circuits. PARES is based on the reduced scan shift that has been previously proposed for generating short test sequences for full scan circuits. In the reduced scan shift method, one determines proch FFs must be controlled and observed for each test vector. According to the results of similar analysis, PARES selects these FFs that must be controlled or observed for a large number of test vectors, as scanned FFs. Short test sequences are generated by reducing scan shift operations using a static test compaction method. To minimize the loss of fault coverage, the order of test vectors is so determined that the unscanned FFs are in the state required by the next test vector. If there are any faults undetected yet by a test sequence derived from the test vectors, then PARES uses a sequential circuit test generator to detect the faults. Experimental results for ISCAS'89 benchmark circuits are given to demonstrate the effectiveness of PARES.     

Mechanism for high singlemode stability of gain-coupled DFB laserswith periodically etched quantum wells

The sidemode suppression ratio of gain-coupled DFB lasers with periodically etched quantum wells is analysed by a more accurate model for amplified spontaneous emission. It is shown that the periodic etching of quantum wells is very effective for providing a high side-mode suppression. The mechanism for the high singlemode stability is explained by the effective modal gain. which has an enhancement at the longer wavelength side of the Bragg stopband     

Analysis and design of combined distributed-feedback/Fabry-Perotstructures for surface-emitting semiconductor lasers

We propose combined distributed-feedback/Fabry-Perot (DFB/FP) structures for surface-emitting semiconductor lasers. The analysis is based on coupled-wave equations modified for surface-emitting lasers. The proposed structures, which exhibit enhanced resonance due to a matching between the gain and field distributions resulting in a reduced threshold compared with simple FP structures, are formed by placing the DFB structure between two DBR mirrors of an FP resonant cavity and introducing phase layers between the DFB region and the mirrors. It was found that the periodic-gain structures are a special case of the combined DFB/FP structures in which the index coupling effect is assumed to be negligible due to a small fill factor or a small refractive-index difference. The effect of complex (gain and index) coupling on the design and the threshold characteristics of the structures is clearly illustrated. Some important design considerations that were neglected in the previous papers are addressed     

Circular beam emission from 1.3 μm InGaAsPstrained-multiquantum-well lasers

The beam divergence in the vertical direction from a graded index separate confinement heterostructure (GRINSCH) multiquantum-well (MQW) laser has been studied. It is demonstrated both theoretically and experimentally that a circular beam MQW laser can be produced by choosing appropriate thicknesses for the GRINSCH layers, while maintaining other desired laser characteristics. The beam divergence is found to be more affected by the index change induced by injected carriers than by strain in the MQW active layer. Theoretical results are in good agreement with the measurements for 1.3-μm InGaAsP strained MQW lasers     

Complexity of the color appearance of objects with nonuniform illumination

An inversion relationship is clarified between lightness and brightness, and also between chroma and colorfulness under nonuniform illumination with different illuminance levels (high and low) within the same visual field. Brightness (or colorfulness) of object color with low lightness (or chroma) under high illuminance level is perceived higher than that of another object color with high lightness (or chroma) under low illuminance level. Two color images are given for showing the inversion phenomena on brightness–lightness and colorfulness–chroma between object colors under different illuminance levels. These color images are useful for making researchers on color understand the differences in concept between brightness and lightness, and also between colorfulness and chroma. In particular, the concept of colorfulness is important, but difficult to understand. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 372–377, 2007