Review: the latest advances in biomedical applications of chitosan hydrogel as a powerful natural structure with eye-catching biological properties

Journal of Materials Science - Chitosan is one of the natural cationic polymers with unique properties such as non-toxicity, biodegradability, biocompatibility, environmentally friendly that has...     

A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Studying the Effect of Cobalt Doping on Optical and Magnetic Properties of Zinc Oxide Nanoparticles

Silicon - Nano-crystalline powders of Zn1−xCoxO with $\left (0.0\le x\le 0.07 \right )$ have been synthesized by sol-gel method. X-ray diffraction patterns of the prepared samples confirm the...     

The effect of pre-wetting on dynamic contact angles

A roll-coating experimental system is used to study the effect of pre-wetting on dynamic contact angles, the interfacial displacement depth, and the associated phenomenon of air entrainment. The system consists of a roll, which is horizontally rotating in a liquid pool. The dynamic contact angle is recorded by a macrophotography system. The test liquids are glycerol solutions with viscosities in the range 104 < μ < 748 mPa · s. The value of (μV/ρg)^0.5 is taken as the characteristic length to be used in the dimensionless relationships which correlate experimental measurements. The effect of base layer entry angle into the liquid pool on the dynamic contact angles and other flow parameters is studied. Comparison is made with measurements in dry tape-coating and other pre-wet roll–coating systems.     

K-ras gene mutations: an unfavorable prognostic marker in stage I lung adenocarcinoma

Activation of K-ras gene by point mutations, a common finding in lung adenocarcinomas, has been suggested to decrease patient survival. We investigated 109 lung adenocarcinomas, mostly small, peripheral, stage I tumours (81/109) for presence of K-ras gene mutations at codons 12 and 13. Mutations were detected by denaturing gradient gel electrophoresis analysis of specific sequences amplified by polymerase chain reaction from DNA extracted from archival pathological material. Thirty-three of 109 (30.3%) tumours showed mutations at codon 12 (28/33, 84.8%) or 13 (5/33, 15.2%) of the gene. Mutations and type of nucleotide substitutions were differently distributed among cytological subtypes, being more prevalent among less differentiated (G2 and G3) tumours and among bronchial than bronchiolo-alveolar type adenocarcinomas. Survival analysis showed an adverse effect of K-ras mutation on survival, restricted to stage I tumours. Median survival for 81 stage I patients was 30 months for non-mutated tumours versus 20 months for mutated tumours (p = 0.016). Multivariate analysis showed that age of patient (p = 0.001) and K-ras mutation status (p = 0.04) were the only independent factors influencing survival significantly. These data strengthen the hypothesis that K-ras gene mutations may be useful in identifying a subgroup of patients with poor outcome.     

A study on the mechanical strength of Fe2O3/Cr2O3/CuO catalyst for high temperature water gas shift reaction

Journal of Porous Materials - The present study aims to investigate the effects of iron (hydr)oxide phases formed during precipitation and the addition of different binders on the mechanical and...     

Effect of plasticizers on the thermal decomposition of chlorinated polyvinylchloride

Plasticized samples of chlorinated polyvinylchloride (CPVC) were investigated by using thermogravimetric (TG) analysis and differential scanning calorimetry (DSC). Three different plasticizers were studied, namely, dioctyl phthalate (DOP), alkyldiaryl phosphate ester (Santiciser 2148), and triaryl phosphate ester (Reofos 50). TG experiments in nitrogen showed one major decomposition stage, involving dehydrochlorination, and minor pyrolysis reaction of the hydrocarbon residue. In contrast to the three stages previously reported to occur in the nonplasticized‐stabilized CPVC, TG analyses in air showed two distinctive decomposition stages for the plasticized CPVC samples. The DOP system provided a suggestion of a third stage. The first decomposition stage was due not only to the loss of all the chlorine present, but also to loss of the plasticizer or its decomposition products. The second decomposition stage was mostly due to char oxidation, the char being formed almost exclusively from the DCE and VDC units in CPVC polymer. DSC results showed that in the presence of nitrogen, there was no significant plasticizer effect on the thermal decomposition behavior of CPVC up to about 330°C, while in air the DSC traces also show no significant differences below 400°C. The two phosphate plasticizers showed no significant differences in their effect on the thermal decomposition behavior of CPVC under the same experimental conditions. It is believed that P₂O₅ and polyphosphoric acid are among the main constituents of the residua. These would impart a protective glassy surface to the char. This will facilitate effective flame retardant action. This preliminary conclusion is based on the premise that the more stable the char layers are, the more resilient will be the protective layer, and consequently, the better the flame retardant effect. J. VINYL ADDIT. TECHNOL., 11:21–27, 2005. © 2005 Society of Plastics Engineers     

Application of orthogonal collocations to some transport phenomena problems in co-axial cylinders and spheres

Collocation methods are developed for the solution of some differential equation models for transport phenomena problems in one-and two-dimensions in co-axial annuli of spherical and cylindrical shapes. General formulae are developed to obtain orthogonal polynomials over an arbitrary interval using two types of weighting functions. The convergence and accuracy of the methods are demonstrated using two test problems, i.e., calculation of effectiveness factors in (a) a spherical pellet with peripherally deposited catalyst and (b) a Raschig ring type cylindrical catalyst pellet. Comparisons of results obtained from the present methods with analytic solutions for the first-order reactions indicate good agreement. Numerical solutions are also obtained for the second-and the third-order reactions for which analytic solutions are not available. Results obtained in terms of a new Thiele modulus involving the ratio of volume of peripherally deposited part of catalyst to exterior surface area indicate that this normalization brings effectiveness factor versus Thiele modulus curves close together for co-axial spherical and long cylindrical pellets, as it does for these geometries without the inner co-axial portion.     

Natural killer or T-lymphocyte cells: Which is the best immune therapeutic agent for cancer? An optimal control approach

Therapeutic vaccines are being developed as a promising new approach to treatment for cancer patients. There are still many unanswered questions about which kind of therapeutic vaccines are the best for the cancer treatments? In this paper we consider a mathematical model, in the form of a system of ordinary differential equations (ODE), this system is an example from a class of mathematical models for immunotherapy of the tumor that were derived from a biologically validated model by Lisette G. de Pillis. The problem how to schedule a variable amount of which vaccines to achieve a maximum reduction in the primary cancer volume is consider as an optimal control problem and it is shown that optimal control is quadratic with 0 denoting a trajectory corresponding to no treatment and 1 a trajectory with treatment at maximum dose along that all therapeutics are being exhausted. The ODE system dynamics characterized by locating equilibrium points and stability properties are determined by using appropriate Lyapunov functions. Especially we attend a parametric sensitivity analysis, which indicates the dependency of the optimal solution with respect to disturbances in model parameters.