Referenzprozesse für elektronische Ausschreibungen aus Sicht des industriellen Einkaufs

Many companies and purchasing departments only possess a limited knowledge about the modelling of inter-company business processes for electronic procurement. In the past the discussion about electronic procurement was mostly focused on technical aspects. This article introduces a reference process model for procurement auctions. The process model is made up of a basic process, which describes a minimal process for procurement auctions, and a number of process alternatives, which allow for the adoption of the basic process to changing parameters and individual company requirements.     

Aqua-Biomant: integrated biological and electrochemical oxidation for industrial wastewater treatment.

An innovative technology for industrial wastewater treatment has been developed. The main focus of the new system is a transformation of persistent organic compounds (biorecalcitrant COD) into a biodegradable fraction, followed by high efficient biological elimination using specialised bacteria's. To fulfill these targets the Aqua-Biomant process integrates two treatment steps: an aerated biological upflow filter and a electrochemical oxidation technique using boron doped-diamond electrodes. The advantages of the process are high efficient COD removal with reduced energy consumption combined with low total residence time.     

The residue of vector sets with applications to decidability problems in Petri nets

Summary A set K of integer vectors is called right-closed, if for any elementmK all vectors mm are also contained in K. In such a case K is a semilinear set of vectors having a minimal generating set res(K), called the residue of K. A general method is given for computing the residue set of a right-closed set, provided it satisfies a certain decidability criterion.Various right-closed sets wich are important for analyzing, constructing, or controlling Petri nets are studied. One such set is the set CONTINUAL(T) of all such markings which have an infinite continuation using each transition infinitely many times. It is shown that the residue set of CONTINUAL(T) can be constructed effectively, solving an open problem of Schroff. The proof also solves problem 24 (iii) in the EATCS-Bulletin. The new methods developed in this paper can also be used to show that it is decidable, whether a signal net is prompt [23] and whether certain -languages of a Petri net are empty or not.It is shown, how the behaviour of a given Petri net can be controlled in a simple way in order to realize its maximal central subbehaviour, thereby solving a problem of Nivat and Arnold, or its maximal live subbehaviour as well. This latter approach is used to give a new solution for the bankers problem described by Dijkstra.Since the restriction imposed on a Petri net by a fact [11] can be formulated as a right closed set, our method also gives a new general approach for implementations of facts.     

Gezielte Nutzung biologischer Systeme

Directed exploitation of biological systems . During the past few decades, our knowledge of molecular process responsible for genetics has increased dramatically. Discovery of the giant molecule deoxyribonucleic acid – abbreviated as DNA – as the carrier of genetic information heralded in a development which nowadays permits us to effect directed changes in the genetic material of an organism. Thus we can provide easily cultured microorganisms with genes which were previously located in a completely different genetic environment. This helps us to obtain high yields of proteins or other substances which were formerly very difficult to obtain. Higher organisms such as animals and plants can also undergo modification of their genetic equipment. This adds a new dimension to the breeding of such species. Above all, genetic engineering provides new insights into the enormously complex interplay of molecules which go to make up a living cell. The resulting understanding of life processes on a molecular level permits recognition of malfunction and therapy of the ensuring disease by new drugs. In addition to these positive aspects, genetic engineering provides scope for conducting experiments whose ethical implications demand very earnest consideration.     

Mass transfer in trickle-bed reactors at low reynolds number

Mass transfer rates were determined in a 3.4 cm i.d. trickle-bed reactor in the absence of reaction by absorption measurements and in presence of reaction. Gas flow rates were varied from 0-100 l/h and liquid flow rates from 0-1.5 l/h. The catalyst particles were crushed to an average diameter of 0.054 and 0.09 cm. Mass transfer coefficients remained unaffected by change in gas flow rate but increased with liquid rate. The data from absorption measurements were evaluated with predictions based upon plug-flow and axial dispersion model. Mass transfer coefficients were found greater in case of axial dispersion model than that of plug-flow model specially at low Reynolds number (Re₁ < 1).Hydrogenation of α-methylstyrene to cumene using a Pd/Al₂O₃ catalyst was taken as a model reaction. Intrinsic kinetic studies were made in a laboratory-stirred-autoclave. Mass transfer coefficients were determined using these intrinsic kinetic data from the process kinetic measurements in trickle-bed reactor. Mass transfer coefficients under reaction conditions were found to be considerably higher than those obtained by absorption measurements.Correlations were suggested for predicting mass transfer coefficients at low Reynolds number.The gas to liquid mass transfer coefficients for lower gas and liquid flow rates were determined in a laboratory trickle-bed reactor. The effect of axial dispersion on mass transfer was considered in order to evaluate the experimental data. Three correlations were formulated to calculate the mass transfer coefficients, which included the effect of liquid loading, particle size and the properties of the reacting substances. The gas flow rate influences the gas to liquid mass transfer only in the region of low gas velocities. In the additional investigations of gas to liquid mass transfer without reaction in trickle-bed reactor, the mass transfer coefficients were determined under reaction conditions and the intrinsic kinetics was studied in a laboratory scale stirred autoclave with suspended catalyst. A few correlations are formulated for the mass transfer coefficients. A comparison with the gas-liquid mass transfer coefficient obtained by absorption measurements showed considerable deviations, which were illustrated phenomenologically.     

Energieinformatik

Due to the increasing importance of producing and consuming energy more sustainably, Energy Informatics (EI) has evolved into a thriving research area within the CS/IS community. The article attempts to characterize this young and highly dynamic field of research by describing current EI research topics and methods and provides an outlook of how the field might evolve in the future. It is shown that two general research questions have received the most attention so far and are likely to dominate the EI research agenda in the coming years: How to leverage information and communication technology (ICT) to (1) improve energy efficiency, and (2) to integrate decentralized renewable energy sources into the power grid. Selected EI streams are reviewed, highlighting how the respective research questions are broken down into specific research projects and how EI researchers have made contributions based on their individual academic background.     

Distance visualization for interactive 3D implant planning

An instant and quantitative assessment of spatial distances between two objects plays an important role in interactive applications such as virtual model assembly, medical operation planning, or computational steering. While some research has been done on the development of distance-based measures between two objects, only very few attempts have been reported to visualize such measures in interactive scenarios. In this paper we present two different approaches for this purpose, and we investigate the effectiveness of these approaches for intuitive 3D implant positioning in a medical operation planning system. The first approach uses cylindrical glyphs to depict distances, which smoothly adapt their shape and color to changing distances when the objects are moved. This approach computes distances directly on the polygonal object representations by means of ray/triangle mesh intersection. The second approach introduces a set of slices as additional geometric structures, and uses color coding on surfaces to indicate distances. This approach obtains distances from a precomputed distance field of each object. The major findings of the performed user study indicate that a visualization that can facilitate an instant and quantitative analysis of distances between two objects in interactive 3D scenarios is demanding, yet can be achieved by including additional monocular cues into the visualization.     

Interactive separating streak surfaces

Streak surfaces are among the most important features to support 3D unsteady flow exploration, but they are also among the computationally most demanding. Furthermore, to enable a feature driven analysis of the flow, one is mainly interested in streak surfaces that show separation profiles and thus detect unstable manifolds in the flow. The computation of such separation surfaces requires to place seeding structures at the separation locations and to let the structures move correspondingly to these locations in the unsteady flow. Since only little knowledge exists about the time evolution of separating streak surfaces, at this time, an automated exploration of 3D unsteady flows using such surfaces is not feasible. Therefore, in this paper we present an interactive approach for the visual analysis of separating streak surfaces. Our method draws upon recent work on the extraction of Lagrangian coherent structures (LCS) and the real-time visualization of streak surfaces on the GPU. We propose an interactive technique for computing ridges in the finite time Lyapunov exponent (FTLE) field at each time step, and we use these ridges as seeding structures to track streak surfaces in the time-varying flow. By showing separation surfaces in combination with particle trajectories, and by letting the user interactively change seeding parameters such as particle density and position, visually guided exploration of separation profiles in 3D is provided. To the best of our knowledge, this is the first time that the reconstruction and display of semantic separable surfaces in 3D unsteady flows can be performed interactively, giving rise to new possibilities for gaining insight into complex flow phenomena.