Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

数值模拟铸件充型过程中的液/固两相流动

铸造过程中熔融金属内的固体渣粒的运动轨迹是非常重要的。文中给出了粒子传输轨迹的数学模型,该数学模型采用显示法来确定粒子的位置。模拟研究结果与用其它数学模型的模拟结果比较,吻合良好。该模型可用于固体粒子位置的确定,并应用到SUTCAST软件中。     

Stability analysis of shallow tunnels subjected to eccentric loads by a boundary element method

In this paper, stress behavior of shallow tunnels under simultaneous non-uniform surface traction and symmetric gravity loading was studied using a direct boundary element method(BEM). The existing fullplane elastostatic fundamental solutions to displacement and stress fields were used and implemented in a developed algorithm. The cross-section of the tunnel was considered in circular, square, and horseshoe shapes and the lateral coefficient of the domain was assumed as unit quantity. Double-node procedure of the BEM was applied at the corners to improve the model including sudden traction changes. The results showed that the method used was a powerful tool for modeling underground openings under various external as well as internal loads. Eccentric loads significantly influenced the stress pattern of the surrounding tunnel. The achievements can be practically used in completing and modifying regulations for stability investigation of shallow tunnels.     

Synthesis and electrochemical properties of LiNi0.8Co0.2O2 nanopowders for lithium ion battery applications

Nitrates of lithium, cobalt and nickel are utilized to synthesize LiNi_0.8Co_0.2O₂ cathode material through sol-gel technique. Various synthesis parameters such as calcination time and temperature as well as chelating agent are studied to determine the optimized condition for material processing. Using TG/DTA techniques, the optimized calcination temperatures are selected. Different characterization techniques such as ICP, XRD and TEM are employed to characterize the chemical composition, crystal structure, size and morphology of the powders. Micron and nano-sized powders are produced using citric/oxalic and TEA as chelating agent, respectively. Selected powders are used as cathode material to assemble batteries. Charge-discharge testing of these batteries show that the highest discharge capacity is 173 mAh g⁻¹ at a constant current of 0.1 mA cm⁻², between 3.0 and 4.2 V. This is obtained in a battery assembled with the nanopowder produced by TEA as chelating agent.     

Nafion/histidine functionalized carbon nanotube: High-performance fuel cell membranes

Here we show preparation and characterization of a new type of composite membrane based on Nafion^®/histidine modified carbon nanotube by imidazole groups (Im-CNT), for direct methanol fuel cell (DMFC) applications. Due to the presence of this imidazole-based amino acid on the surface of CNT, new electrostatic interactions can be formed in the interface of Nafion^® and Im-CNT. Physical characteristics of these nanocomposite membranes are investigated by water uptake, methanol permeability, ion exchange capacity, proton conductivity, as well as fuel cell performance results.     

Synthesis of kappa-carrageenan-g-poly(acrylamide)/sepiolite nanocomposite hydrogels and adsorption of cationic dye

In this study, nanocomposite hydrogels from grafting of acrylamide onto kappa-carrageenan biopolymer were prepared in the presence of sepiolite clay. Methylenebisacrylamide and ammonium persulfate were used as cross-linker and initiator, respectively. The sepiolite nanoclay was introduced into hydrogel matrix without any chemical treatment. The structure of nanocomposites was investigated by FTIR, SEM, TEM, and TGA techniques. The TEM image showed that sepiolite exists as individual needle’s shape. The swelling of hydrogels were studied in distilled water, salt solutions, and various pHs. The obtained nanocomposites were evaluated to remove of cationic crystal violet (CV) dye from water. The kinetic and isotherm of adsorption of dye onto nanocomposites were studied and analyzed according to kinetic and isotherm models. The results showed that the pseudo-second-order adsorption kinetic was predominated for the adsorption of CV onto nanocomposites. The experimental equilibrated adsorption capacity of nanocomposites was analyzed using Freundlich and Langmuir isotherm models. The results corroborated that the experimental data fit the Langmuir isotherm the best. By varying the pH of initial dye solution, while the clay-free hydrogel showed relatively pH-independent adsorption behavior, the nanocomposites depicted pH-dependent adsorption.     

Production of hydrogen from purge gases of ammonia plants in a catalytic hydrogen-permselective membrane reactor

The present study investigates hydrogen production in a hydrogen-permselective membrane reactor from purge gases of an ammonia plant. Hydrogen which initially exists in the purge gases and hydrogen that is produced from decomposition of ammonia on nickel–Alumina catalyst bed simultaneously permeate from reaction side to shell side through a thin layer of palladium–silver membrane. A sweep gas can be used in the shell side for increasing driving force. The amount of hydrogen that can be gained annually and effect of pressure, temperature, thickness of Pd–Ag layer, configuration of flow in the membrane reactor and sweep gas flow ratio have been studied. This study shows that the countercurrent mode is better than co-current mode of operation. The rate of hydrogen permeation increases with increasing of temperature, pressure and sweep gas flow rate. This approach produces and separates large amounts of hydrogen and decreases environmental impacts owing to ammonia emission.     

Corrigendum to the paper ‘Linear Time Varying Model Predictive Control and its Application to Active Steering Systems: Stability Analysis and Experimental Validation’ (International Journal of Robust and Nonlinear Control 2008; 18(8):862–875)

This note is a corrigendum of the paper ‘Linear Time Varying Model Predictive Control and its Application to Active Steering Systems: Stability Analysis and Experimental Validation’, published on the volume 18, issue 8, pages 862–875 of the International Journal of Robust and Nonlinear Control in 2008. Next we point out a technical error in the proof of Lemma 2 of the paper, and provide the corrected version of the lemma. Copyright © 2011 John Wiley & Sons, Ltd.     

A new link function in GLM-based control charts to improve monitoring of two-stage processes with Poisson response

In this paper, a new procedure is developed to monitor a two-stage process with a second stage Poisson quality characteristic. In the proposed method, log and square root link functions are first combined to introduce a new link function that establishes a relationship between the Poisson variable of the second stage and the quality characteristic of the first stage. Then, the standardized residual statistic, which is independent of the quality characteristic in the previous stage and follows approximately standardized normal distribution, is computed based on the proposed link function. Then, Shewhart and exponentially weighted moving average (EWMA) cause-selecting charts are utilized to monitor standardized residuals. Finally, two examples and a case study with a Poisson response variable are investigated, and the performance of the charts is evaluated by using average run length (ARL) criterion in comparison with the best literature method.     

Producing Ti–6Al–4V/TiC composite with good ductility by vacuum induction melting furnace and hot rolling process

In this paper, Ti–6Al–4V/TiC composite was fabricated by VIM furnace and graphite crucible. X-ray diffraction analysis and EDS techniques were used to identify the phases in the material. Microstructure characteristics of the Ti–6Al–4V/TiC composite were evaluated by means of optical microscopy. The tensile test was performed at room temperature after hot-rolling of the samples in the beta phase field. The results revealed that at different melting times, three kinds of precipitates are formed in the microstructure including grain boundary, eutectic and transgranular precipitates. The size of transgranular precipitates was significantly larger than that of the other two types of carbides and had the worst effect on ductility. Furthermore, an increase in the amount of carbon by increasing the melting time led to an increase in hardness and strength and decrease in ductility. Finally, TiC/Ti–6Al–4V with high strength (∼1200 MPa) and good ductility (10% elongation and 15% reduction in area) was produced in VIM furnace using 0.5 min melting time.