Using biochemically purified water at coke plants

The use of biochemically purified water in place of industrial-grade water for the exhaust-gas scrubbers in the drying department of the coal-enrichment shop and for irrigation of the cyclone washers in the coke shops at OAO ZSMK is considered. It is found that biochemically purified water may be used for 100% of the water needs in coke production. Using biochemically purified water in the dust-trapping equipment, the coaland coke-dust content of the atmospheric emissions may be reduced by 24.5%. Additional purification of wastewater by adsorption on coke and coal dust is possible.     

Stabilization and termination of severe accidents in LWRs

The last 20 years of research on severe accident safety for light water reactors (LWRs) has resolved a number of issues. However, the issue of melt/debris coolability is still unresolved. At stake is the stabilization and termination of a severe accident, if ever it would occur. The stabilization and termination can be established only through the coolability of the melt or the particulate debris, which are found in-vessel, or ex-vessel, depending upon the extent of the progression of a postulated accident.This paper will review the state of the art of coolability during a severe accident for the current light water reactors (LWRs). It will also review whether the accident management actions will be effective in terminating a postulated severe accident. The attention paid to the stabilization and coolability in future LWRs will be discussed and the design solutions will be evaluated.     

A new mathematical programming approach to multi-group classification problems

In this paper we introduce a goal programming formulation for the multi-group classification problem. Although a great number of mathematical programming models for two-group classification problems have been proposed in the literature, there are few mathematical programming models for multi-group classification problems. Newly proposed multi-group mathematical programming model is compared with other conventional multi-group methods by using different real data sets taken from the literature and simulation data. A comparative analysis on the real data sets and simulation data shows that our goal programming formulation may suggest efficient alternative to traditional statistical methods and mathematical programming formulations for the multi-group classification problem.     

Kinetics of the Hydrolysis of some alkyl halides in aqueous ethyl alcohol

A comparison of the rates of substitution and elimination reactions occuring simultaneously in alkaline hydrolysis of n-amyl chloride, isoamyl chloride, n-amyl iodide and n-hexyl iodide at different temperatures and in varying alcohol-water mixtures, has been made. Under the same conditions the rates of solvolysis of these halides have also been reported. In the case of n-amyl halides there is a much larger rate difference between chloride and bromide than between bromide and iodide.     

Peeling dynamics of fluid membranes bridged by molecular bonds: moving or breaking

Biological adhesion is a critical mechanical function of complex organisms. At the scale of cell–cell contacts, adhesion is remarkably tunable to enable both cohesion and malleability during development, homeostasis and disease. It is physically supported by transient and laterally mobile molecular bonds embedded in fluid membranes. Thus, unlike specific adhesion at solid–solid or solid–fluid interfaces, peeling at fluid–fluid interfaces can proceed by breaking bonds, by moving bonds or by a combination of both. How the additional degree of freedom provided by bond mobility changes the mechanics of peeling is not understood. To address this, we develop a theoretical model coupling diffusion, reactions and mechanics. Mobility and reaction rates determine distinct peeling regimes. In a diffusion-dominated Stefan-like regime, bond motion establishes self-stabilizing dynamics that increase the effective fracture energy. In a reaction-dominated regime, peeling proceeds by travelling fronts where marginal diffusion and unbinding control peeling speed. In a mixed reaction–diffusion regime, strengthening by bond motion competes with weakening by bond breaking in a force-dependent manner, defining the strength of the adhesion patch. In turn, patch strength depends on molecular properties such as bond stiffness, force sensitivity or crowding. We thus establish the physical rules enabling tunable cohesion in cellular tissues and in engineered biomimetic systems.     

Bandpass filter with an ultra-wide stopband designed on miniaturized coaxial resonators

Characteristics of a new miniaturized coaxial resonator are theoretically investigated. It is shown that the first resonant frequency of the resonator can be significantly lowered relative to the second one and the resonator dimensions can be considerably decreased as compared to those of a traditional dielectric-filled quarter-wavelength coaxial resonator. Based on the investigated resonator, a fourth-order bandpass filter has been designed and fabricated. The filter stopband at a level of no worse than ?90 dB extends to the frequency that exceeds the passband center frequency by a factor of 47. Calculated frequency responses are in good agreement with those measured on the fabricated filter prototypes.     

P-type double gate junctionless tunnel field effect transistor

We have investigated the 20 nm p-type double gate junctionless tunnel field effect transistor （P-DGJLTFET） and the impact of variation of different device parameters on the performance parameters of the P-DGJLTFET is discussed. We achieved excellent results of different performance parameters by taking the optimized device parameters of the P-DGJLTFET. Together with a high-k dielectric material （TiO2） of 20 nm gate length, the simulation results of the P-DGJLTFET show excellent characteristics with a high IoN of ～ 0.3 mA/μm, a low/OFF of ～ 30 fA/μm, a high ION/IOFF ratio of ～ 1×10^10, a subthreshold slope （SS） point of ～ 23 mV/decade, and an average SS of ～ 49 mV/decade at a supply voltage of -1 V and at room temperature, which indicates that PDGJLTFET is a promising candidate for sub-22 nm technology nodes in the implementation of integrated circuits.     

Target tracking in infrared imagery using weighted composite reference function-based decision fusion.

In this paper, we propose a novel decision fusion algorithm for target tracking in forward-looking infrared image sequences recorded from an airborne platform. An important part of this study is identifying the failure modes in this type of imagery. Our strategy is to prevent these failure modes from developing into tracking failures. The results furnished by competing ego-motion compensation and tracking algorithms are evaluated based on their similarity to a target model constructed using the weighted composite reference function.     

Spiral-CT-based assessment of tracheal stenoses using 3-D-skeletonization

PURPOSE: Demonstration of a technique for three-dimensional (3-D) assessment of tracheal-stenoses, regarding site, length and degree, based on spiral computed tomography (S-CT). PATIENTS AND METHODS: S-CT scanning and automated segmentation of the laryngo-tracheal tract (LTT) was followed by the extraction of the LTT medial axis using a skeletonization algorithm. Orthogonal to the medial axis the LTT 3-D cross-sectional profile was computed and presented as line charts, where degree and length was obtained. Values for both parameters were compared between 36 patients and 18 normal controls separately. Accuracy and precision was derived from 17 phantom studies. RESULTS: Average degree and length of tracheal stenoses was found to be 60.5% and 4.32 cm in patients compared with minor caliber changes of 8.8% and 2.31 cm in normal controls (p < 0.0001). For the phantoms an excellent correlation between the true and computed 3-D cross-sectional profile was found (p < 0.005) and an accuracy for length and degree measurements of 2.14 mm and 2.53% respectively could be determined. The corresponding figures for the precision were found to be 0.92 mm and 2.56%. CONCLUSION: LTT 3-D cross-sectional profiles permit objective, accurate and precise assessment of LTT caliber changes. Minor LTT caliber changes can be observed even in normals and, in case of an otherwise normal S-CT study, can be regarded as artifacts.