Ultrasound evaluation of piglet diaphragm function before and after fatigue

Clinically, a noninvasive measure of diaphragm function is needed. The purpose of this study is to determine whether ultrasonography can be used to 1) quantify diaphragm function and 2) identify fatigue in a piglet model. Five piglets were anesthetized with pentobarbital sodium and halothane and studied during the following conditions: 1) baseline (spontaneous breathing); 2) baseline + CO2 [inhaled CO2 to increase arterial PCO2 to 50-60 Torr (6.6-8 kPa)]; 3) fatigue + CO2 (fatigue induced with 30 min of phrenic nerve pacing); and 4) recovery + CO2 (recovery after 1 h of mechanical ventilation). Ultrasound measurements of the posterior diaphragm were made (inspiratory mean velocity) in the transverse plane. Images were obtained from the midline, just inferior to the xiphoid process, and perpendicular to the abdomen. M-mode measures were made of the right posterior hemidiaphragm in the plane just lateral to the inferior vena cava. Abdominal and esophageal pressures were measured and transdiaphragmatic pressure (Pdi) was calculated during spontaneous (Sp) and paced (Pace) breaths. Arterial blood gases were also measured. Pdi(Sp) and Pdi(Pace) during baseline + CO2 were 8 +/- 0.7 and 49 +/- 11 cmH2O, respectively, and decreased to 6 +/- 1.0 and 27 +/- 7 cmH2O, respectively, during fatigue + CO2. Mean inspiratory velocity also decreased from 13 +/- 2 to 8 +/- 1 cm/s during these conditions. All variables returned to baseline during recovery + CO2. Ultrasonography can be used to quantify diaphragm function and identify piglet diaphragm fatigue.     

Motion patterns of Nabesna Glacier (Alaska) revealed by interferometric SAR techniques

Nabesna Glacier is one of the longest land-terminus mountain glaciers in North America. However, its flow has never been studied. We derived detailed motion patterns of Nabesna Glacier in winter and spring 1994–1996 from the synthetic aperture radar (SAR) images acquired by the European Remote Sensing satellites (ERS-1 and ERS-2) using interferometric SAR (InSAR) techniques. Special effort was made to assess the accuracy of the motion estimates, and remove data points with high uncertainty from the motion profiles, enabling us to obtain reliable glacier flow patterns along the highly curved main course of Nabesna Glacier. The results, covering 80 km of the 87 km main course of the glacier, were used to delineate four distinctive sections in terms of spatial and temporal variability of the glacier speed: (1) the upper section where glacier flow was apparently random both temporally and spatially presumably due to development of crevasses; (2) the upper-middle section with relatively steady flow around 0.27 to 0.4 m/day; (3) the middle section with a stable pattern of acceleration from 0.27–0.3 m/day to the maximum about 0.67–0.73 m/day, followed by a general deceleration to 0.17–0.33 m/day before reaching (4) the lower section where the glacier motion was generally slow yet highly variable although uncertainty in the estimation is high. Occurrence of the flow maximum, as well as many local maxima and minima at consistent locations over different periods suggests that the valley geometry affect the overall flow pattern. On top of this general trend, many small-scale temporal/spatial variations in the glacier flow patterns were observed along the glacier, especially in the lower sections. On average, the flow speeds were in the range of 0.3 to 0.7 m/day; however this lacks any measurements of summer flow speeds which are expected to be significantly higher.     

Observers for stabilization of systems with matched uncertainty

In this article, we study the design of observer-based robust linear feedback controllers. The uncertainty, which can enterA, and either theB orC matrices, is assumed to satisfy certain matching conditions. Lyapunov techniques are used to establish sufficient conditions for stability, given an uncertainty bound. In particular, sufficient conditions are obtained that, if met, result in stabilizing controllers regardless of the size of the uncertainty entering the system matrix, as long as the standard constraints on the uncertainty entering the input or output matrices are met. As with the case of more general forms of uncertainty, the resulting observers often have high gains. To study performance, the problem of disturbance rejection is considered. Sufficient conditions are presented for obtaining control laws that stabilize the closed loop system, regardless of the size of the uncertainty entering the system matrix, while simultaneously guaranteeing arbitrarily small infinity norm for the transfer function from the plant disturbances to the outputs.     

Analysis of multilayered dielectric waveguides: variationaltreatment

A fast and near exact modal analysis is presented to obtain the propagation constants and electric field profiles for dielectric multilayered channel (rib) waveguides. Calculations are performed for a particular channel configuration and found to be in excellent agreement with those obtained using the finite difference method     

Rapid assessment of infant predictors of adult IQ: Midtwin-midparent analyses.

Assessed infant predictors of adult IQ with same-sex infant twins (114 pairs) and their parents. The midtwin–midparent design permits the rapid assessment of infant measures to predict later behavior, because the midparent score serves as a proxy for the infant's potential score at maturity. At 5, 7, and 9 mo, Ss were observed on the Fagan Test of Infant Intelligence, hand preference, vocalizations, selected Bayley Scales of Infant Development items, and a modified Bayley Infant Behavior Record. At 8 mo, Ss received the Visual Expectation Paradigm and an auditory discrimination task. Their parents received the Wechsler Adult Intelligence Scale—Revised (WAIS—R). Some infant measures, indicative of information processing, language ability, and temperament, predicted midparent IQ. This study extended and partially replicated findings from a previous midtwin–midparent cohort (L. F. DiLalla et al; see record 1991-04066-001). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Morphology and properties of ASA/PET blends

This study examines the morphology and mechanical properties of acrylate styrene acrylonitrile (ASA) and polyethylene terephthalate (PET) blends. The morphology of the 60/40 and 40/60 ASA/PET blends reveals a dispersed phase morphology verging on co-continuity, whilst the 50/50 blend appears to be completely co-continuous. Processing temperature has no effect on blend modulus or tensile strength and there is no statistically significant difference in mechanical performance between the three blend ratios. Charpy impact resistance decreases with increasing processing temperature. The fracture surface reveals a similar mushroom fibril morphology found for the ASA/polybutylene terephthalate (PBT) system, but is less extensive. Thermal analysis shows a marked drop in glass transition temperature for the blends compared to the component polymers.     

Magnitude response peak detection and control using balanced modelreduction and leakage to a target

Adaptive filters are often used in systems that need to adjust to unknown environments. Communication channels with frequency nulls, signals that lack energy in a frequency band, and transducers with a finite bandwidth present special problems since adaptive filters can develop a large gain at frequencies where excitation is lacking. Such magnitude response peaks can cause problems if unchecked. This paper suggests a procedure for detecting and controlling magnitude response peaks that uses a balanced model reduction technique to form a low-order IIR filter that approximates the performance of the filter. The poles are then studied to determine if magnitude response peaks are present. If a peak is detected, then “leakage to a target” is used to gradually reduce the peak with minimal effect on the equalizer's response at other frequencies. Several useful bounds on the equalizer frequency response magnitude are derived, and the frequency domain behavior of the leakage to a target algorithm is analyzed. A case study is provided     

New energy transfer dyes for DNA sequencing

We have synthesized a set of four energy transfer dyes and demonstrated their use in automated DNA sequencing. The donor dyes are the 5- or 6-carboxy isomers of 4'-aminomethylfluorescein and the acceptor dyes are a novel set of four 4,7-dichloro-substituted rhodamine dyes which have narrower emission spectra than the standard, unsubstituted rhodamines. A rigid amino acid linker, 4-aminomethylbenzoic acid, was used to separate the dyes. The brightness of each dye in an automated sequencing instrument equipped with a dual line argon ion laser (488 and 514 nm excitation) was 2-2.5 times greater than the standard dye-primers with a 2 times reduction in multicomponent noise. The overall improvement in signal-to-noise was 4- to 5-fold. The utility of the new dye set was demonstrated by sequencing of a BAC DNA with an 80 kb insert. Measurement of the extinction coefficients and the relative quantum yields of the dichlororhodamine components of the energy transfer dyes showed their values were reduced by 20-25% compared with the dichlororhodamine dyes alone.     

Acid-base and electrolyte effects of shortening steeplechase in a three-day-event

This study was designed to characterise the acid-base and electrolyte effects of shortening the distance required during steeplechase (Phase B) in the face of hot and humid weather conditions during a treadmill-simulated Speed and Endurance test. Eight conditioned Thoroughbred horses underwent 3 randomised permutations of a standardised exercise test on a high speed treadmill. Each test consisted of trotting at 3.7 m/s for 10 min (Phase A); galloping at 11 m/s (Phase B) for 4 (cool laboratory conditions), 3 (hot and humid), or 2 (hot and humid) min; trotting at 3.7 m/s for 30 min (Phase C); and walking at 1.8 m/s for 10 min (Phase X). The treadmill slope was 4% for trotting and galloping and 0% for walking. Cool versus hot and humid conditions were 20 degrees C and 50-60% relative humidity vs. 26-28 degrees C and 80-85% relative humidity, respectively. Pulmonary artery blood samples were obtained at rest prior to exercise (Rest); at the end of Phases A (A10) and B (B2-4); at 10 (C10), 20 (C20) and 30 (C30) min through Phase C; and at 5 min into Phase X (X5). Additional samples for lactate (LA) and glucose (GLC) analysis were obtained 5 min into Phase C (C5) and at the end of Phase X (X10). Samples were analysed for packed cell volume (PCV), haemoglobin (HB), total plasma protein (TP), sodium (Na), potassium (K), chloride (Cl), anion gap (AG), plasma glucose (GLC) and lactate (LA), pH, PCO2, bicarbonate (HCO3) and base excess (BE). Shortening steeplechase distance by 50% under hot and humid conditions (2 min B) resulted in a consistent return to control measurements (4 min B) only for plasma LA. Changes in PCV, HB, TP, K and Cl were related more to the longer galloping distance in the 4 min B trials than to hot vs. cold laboratory conditions. Alternatively, changes in LA, GLC, pH, PCO2 and AG were more related to hot and humid laboratory conditions than they were to galloping distance. These latter variables, when combined with physical measures such as core temperature, bodyweight loss, point of fatigue on Phase C and recovery heart rates may serve as the best monitors of positive responses in future studies of proposed modifications to Phase C, rather than those variables which were more distance than weather-related.     

Substrate specificity of the Escherichia coli RuvC protein. Resolution of three- and four-stranded recombination intermediates

The specificity of the Escherichia coli RuvC Holliday junction resolvase has been investigated in vitro. RuvC protein cleaves synthetic DNA substrates that model three- or four-stranded recombination intermediates but fails to act upon Y junctions, G/A mismatches, heterologous loop structures, or two-stranded branched junctions. RuvC therefore differs from endonuclease VII of bacteriophage T4 which exhibits broad range specificity. Using related three- and four-stranded synthetic DNA junctions, we show that RuvC cleaves both junctions at the same DNA sequence and requires a region of homology at the junction point. The action of RuvC on three- and four-stranded recombination intermediates made by RecA was also investigated. We found that RuvC fails to resolve three-stranded intermediates in the presence of RecA, although four-stranded intermediates are resolved under the same conditions. However, both three- and four-stranded intermediates are substrates for the nuclease after removal of RecA. We interpret these differences in terms of the contiguity of the RecA nucleoprotein filament which may, under certain conditions, limit access to the Holliday junction resolvase.