Development of low-alcohol isotonic beer by interrupted fermentation

Alcohol-free beer with isotonic properties is getting more popular and its production can be carried out by different production strategies; however, interrupted fermentation is still a challenge. Therefore, the objective of this study was to develop a low-alcohol isotonic beer (<0.5% v/v) by interrupted fermentation. Moreover, the major objective is to compare the developed product to commercial beverages (sports drinks, ‘Pilsen' regular beer, alcohol-free beers and low-alcohol isotonic beer). The beverages were evaluated based on pH, alcohol content (% v/v), total titratable acidity (mEq L⁻¹), osmolality (mOsmol kg⁻¹), bitterness International Bitterness Units, colour European Brewery Convention, total phenolic compounds (mg L⁻¹ gallic acid), reducing and total sugars (%) and Na and K contents (mg L⁻¹). The developed low-alcohol isotonic beer presented characteristics similar to sports drinks, with the advantage of being richer in phenolic compounds and suitable osmolality. Despite salts were added in its formulation, the grades attributed to all beers employed in the sensory evaluation, as well as the purchase intention did not present significant differences.     

Microwave heating controlled reactive melt infiltration for graphite-Si-SiC ceramics manufacturing

In this work, we investigated a procedure which exploits microwave ovens to produce SiC- based components by reactive melt infiltration of silicon into graphite preforms. The employed oven is designed to grant optical access to the sample surface, which allows to measure its temperature evolution though a noncontact pyrometer. This signal was used as a feedback to control the power provided to the preform and as an experimental output whose analysis provides insight into the reaction mechanism. Specifically, it is found that complete infiltration is achieved much before the end of the reaction. The latter is not fully self-sustained as the global reaction rate continuously decreases with time until it is no more able to keep the temperature above the silicon solidification value. At that point, the reaction stops. The analysis of the processed samples proved that this procedure allows producing fully infiltrated samples without material failure by adjusting the heat provided during the infiltration stage rather than by tuning the preform structure and composition, which is the usual approach. The proposed method is less time and energy consuming than the standard one.     

Overnight closed suction drainage after axillary lymphadenectomy for breast cancer

Axillary lymphadenectomy in breast conservation surgery is associated with substantial morbidity in either seroma formation or infection. Seroma formation in the axilla requiring aspiration occurs in up to 42 per cent of patients treated without drainage. Prolonged outpatient suction drainage reduces but does not eliminate the incidence of seroma formation, while increasing cost, discomfort, and possibly infection rates. We studied the efficacy of overnight closed suction drainage in patients undergoing breast conservation surgery. Fifty consecutive patients undergoing a standard axillary dissection for breast cancer were studied. The axilla was drained with a 7-French closed suction drain. All drains were removed within 23 hours of surgery and prior to discharge from the outpatient surgical center. Patients were examined by the operating surgeon 7 to 10 days after surgery. One patient (2%) experienced a seroma postoperatively. No infections were observed in all 50 patients, and the remaining 49 patients did not experience visible or symptomatic seromas. The number of lymph nodes removed ranged between 5 and 33 with a mean of 15.5 +/- 0.6. Nine out of 50 (18%) patients had metastatic breast cancer to the axillary lymph nodes. Patients undergoing breast conservation surgery benefit from overnight closed suction drainage of the axilla. This short-term method reduces the incidence and the inherent morbidity of axillary seroma formation.     

Coronary bypass in vascular patients: a relatively high-risk procedure

A premise of cardiac risk stratification is that the added risk of coronary artery bypass grafting (CABG) is offset by the improved safety of subsequent vascular reconstruction (VR). We questioned if elective CABG is patients with severe peripheral vascular disease (PVD) is a relatively high-risk procedure. A cohort study of 680 elective CABG patients from January 1993 to December 1994 was performed using three mutually exclusive outcomes of complication-free survival, morbidity, and mortality. Patient characteristic, operative, and outcome data were prospectively collected. Retrospective review determined that 58 patients had either a standard indication for or a history of VR. Overall CABG mortality was 2.5%, with statistically similar but relatively higher rates for PVD as compared to non-PVD patients. In contrast, major morbidity occurred at rates 3.6-fold higher in PVD patients (39.7%) than in disease-free patients (16.7%) after adjustment for the effects of patient and operative variables (odds ratio [OR] 3.67, 95% confidence interval [CI] 1.93-6.99). CABG morbidity in the PVD patient was most likely in those patients with aortoiliac (OR 9.51, CI 3.20-28.27) and aortic aneurysmal (OR 5.24, CI 1.28-21.41) disease types. CABG in PVD patients is associated with significant major morbidity. Such morbidity may preclude or alter the timing of subsequent VR.     

Properties of nanoporous organosilicate hybrid thin films with a bimodal pore size distribution

Low dielectric poly[methylsilsesquioxane‐ran‐trifluoropropylsilsesquioxane‐ran‐(2,4,6,8‐tetramethyl‐2,4,6,8‐tetraethylenecyclotetrasiloxane)silsesquioxane]s {P[M‐ran‐TFP‐ran‐(TCS)]SSQs} having various compositions were synthesized using trifluoropropyl trimethoxysilane, methyl trimethoxysilane and 2,4,6,8‐tetramethyl‐2,4,6,8‐tetra(trimethoxysilylethyl)cyclotetrasiloxane. The chemical composition of the polymers and the content of SiOH end‐groups were controlled by adjusting the reaction conditions, and they were characterized by ¹H‐NMR. The thermally decomposable trifluoropropyl groups on the P[M‐ran‐TFP‐ran‐(TCS)]SSQ backbone and heptakis(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin (CD) were employed as pore generators. The dielectric constants of the porous CD/P[M‐ran‐TFP‐ran‐(TCS)]SSQ films were in the range 2.0–2.7 (at 100 kHz) depending on the concentration of the porogens, and showed no change over 4 days under aqueous conditions. The pore size of the films showed a bimodal distribution, with diameters of ca 0.5–1.0 nm for those originating from the trifluoropropyl groups and 1.7 nm from the CD. The elastic modulus and hardness of the 30 vol% CD‐blended film with a dielectric constant of 2.26 were 2.40 and 0.38 GPa, respectively, as determined by a nanoindenter. Copyright © 2005 Society of Chemical Industry     

Hot-carrier reliability of 20V MOS transistors in 0.13 μm CMOS technology

This paper presents results of reliability investigation of 20 V N-Drift MOS transistor in 0.13 μm CMOS technology. Due to high performances required for CMOS applications, adding high voltage devices becomes a big challenge to guarantee the reliability criteria. In this context, new reliability approaches are needed. Safe Operating Area are defined for switch, V_ds limited and V_gs limited applications in order to improve circuit designs. For V_ds limited applications, deep doping dose effects in drift area are investigated in correlation to lifetime evaluations based on device parameter shifts under hot carrier stressing. To further determine the amount and locations of hot carriers injections, accurate 2D technological and electrical simulations are performed and permit to select the best compromise between performance and reliability for N-Drift MOS transistor.     

Relationship between the genomic organization and the overlapping embryonic expression patterns of the zebrafish dlx genes

To understand the relationship between the expression and the genomic organization of the zebrafish dlx genes, we have determined the genomic structure of the dlx2 and dlx4 loci. This led to the identification of the zebrafish dlx1 and dlx6 genes, which are closely linked to dlx2 and dlx4, respectively. Therefore, the inverted convergent configuration of Dlx genes is conserved among vertebrates. Analysis of the expression patterns of dlx1 and dlx6 showed striking similarities to those of dlx2 and dlx4, respectively, the genes to which they are linked. Furthermore, the expression patterns of dlx3 and dlx7, which likely constitute a third pair of convergently transcribed genes, are indistinguishable. Thus, the overlapping expression patterns of linked Dlx genes during embryonic development suggest that they share cis-acting sequences that control their spatiotemporal expression. The evolutionary conservation of the genomic organization and combinatorial expression of Dlx genes in distantly related vertebrates suggest tight control mechanisms that are essential for their function during development.