计算机辅助液压阀测试系统

一、前言液压元件性能的高精度测试是发展液压技术,提高液压元件性能的重要手段之一。在液压元件的设计、制造、改进中都需要进行大量的、高精度的测试工作,以深刻认识元件的性能并作出分析对比。计算机辅助测试(CAT)在提高测试精度、测试速度、测试的重复性和可靠性,从而在节省大量人力和能源方面都提供了必要的保证,因此在国内外都受到了普遍重视。但是液压元件CAT涉及到试验方法、测试用的各种传感器和仪表,计算机的硬元件     

A scalable kernel-based semisupervised metric learning algorithm with out-of-sample generalization ability

In recent years, metric learning in the semisupervised setting has aroused a lot of research interest. One type of semisupervised metric learning utilizes supervisory information in the form of pairwise similarity or dissimilarity constraints. However, most methods proposed so far are either limited to linear metric learning or unable to scale well with the data set size. In this letter, we propose a nonlinear metric learning method based on the kernel approach. By applying low-rank approximation to the kernel matrix, our method can handle significantly larger data sets. Moreover, our low-rank approximation scheme can naturally lead to out-of-sample generalization. Experiments performed on both artificial and real-world data show very promising results.     

Analysis of Inhomogeneous Optical Systems by the Use of Ray Tracing. II. Three-dimensional Systems with Symmetry

We describe a new approach to the index reconstruction of three-dimensional optical systems with rotational symmetry, which is based on sampling ray paths that lie in the sagittal plane. Since the observed rays are distorted by the optical system itself, they cannot be used directly for index reconstruction. We present an iterative procedure to compute the true ray paths and then to find the index distribution. The utility of the method is verified on the model problem.     

Practical and simple circuitry for the measurement of small capacitance

Practical and cost-effective circuitry with high sensitivity has been developed to measure a small capacitance using current compensation method. The circuitry uses an electronic switch to periodically connect or separate the capacitor under test (C(x)) from a reference capacitor (C(r)). When C(x) is connected in parallel with C(r) the total capacitance becomes C(x)+C(r). On the other hand, as C(x) is separated from C(r), the total capacitance is only C(r). This periodic change of the capacitance generates a periodic square-wave output with an amplitude in proportion to the capacitance of C(x). A high sensitivity of DeltaV/DeltaC=202.2 mV/pF has been achieved, making the circuitry a powerful tool in measuring small capacitances. Three applications have been performed to present its capability: (a) displacement, (b) height of liquid, and (c) angle of tilt. The experimental results demonstrate the performance of the circuitry.     

The discovery of biomarkers for type 2 diabetic nephropathy by serum proteome analysis

Diabetic nephropathy (DN) is a serious kidney complication of diabetes, and constitutes the leading cause of end-stage renal disease. The earliest clinical evidence of DN is microalbuminuria, a term which refers to the appearance of small but abnormal amounts of albumin in the urine. However, screening methods for DN, such as biomarker assays, are yet to be developed for type 2 DN. In the present study, in an attempt to identify the biomarkers for initial diagnoses of type 2 DN, the protein profiles of human sera collected from 30 microalbuminuric type 2 diabetic patients were compared with those collected from 30 normoalbuminuric type 2 diabetic patients, via 2-DE. As a result, a total of 18 spots were determined to have different protein levels in the microalbuminuric patients. Twelve spots had lower protein levels of approximately 50%, and the other six had higher levels of approximately 100-300% as compared to the spots of normoalbuminuric patients. These spots were identified with ESI-Q-TOF (ESI-quadrupole-TOF) MS. Among the identified proteins, vitamin D-binding protein (DBP) and pigment epithelium-derived factor (PEDF) were verified by Western blotting. The results of this study indicate that the DBP may be employed as diagnostic and monitoring biomarkers of type 2 DN, contingent on further study into the matter.     

Knowledge-based system for boundary detection of four-dimensional cardiac magnetic resonance image sequences

A strategy for a knowledge-based system to detect the interior and exterior boundaries of the left ventricle from time-varying cross-sectional images obtained by ECG-gated magnetic resonance imaging (MRI) is discussed. The system uses both fuzzy set theory and Dempster and Shafer theory to manage the knowledge and to control the flow of system information for more efficient use of limited computational resources and memory space. The key to the approach is that it performs edge detection on images through integration and unification of knowledge and information from edge candidates on all the slices and phases of the acquired cardiac MRI dataset. The analysis system does not base decisions on individual measurements, but on consensus opinions by combining many knowledge sources, some of which may not be completely accurate.     

Bulk wave membrane quartz resonators fabricated by a hollow cathode RF plasma etching technique

A hollow cathode maskless plasma etching method for fabrication of thin quartz membranes is presented. A special geometric arrangement of electrodes and substrates allows the complete plasma structure (plasma sheath, bulk plasma) to be transferred to the substrate area during the etching process. The process has successfully been used in preparing thin quartz membranes with plane-convex and plane-parallel shape, and thicknesses of less than 5 mum. Vibration modes in these thin quartz membranes are calculated using the method of equivalent resonant radius. The membranes are used for realization of bulk acoustic wave resonators at fundamental frequencies above 60 MHz. Good agreement between theoretical and experimental characteristics is achieved.     

In-plane contributions to phase contrast in intermittent contact atomic force microscopy

Contrast in the phase response of intermittent-contact atomic force microscopy (IC-AFM) reveals in-plane structural and mechanical properties of polymer monolayers. This result is unexpected, as IC-AFM has previously only been considered as a probe of out-of-plane properties. Until now, AFM measurements of nanoscale in-plane properties have employed contact mode techniques. In-plane property measurements are possible with intermittent contact AFM because there is a small but significant component of tip motion parallel to the sample surface. This in-plane component of tip displacement is virtually universal in AFM, implying that oscillating-tip techniques generally are sensitive to in-plane material properties. We present a simple Hertzian model of intermittent-contact AFM that includes such an in-plane displacement.     

Real-time resolution of self-intersection in dynamic cylindrical free-form deformation

This paper presents a method of self-intersection detection and resolution for dynamic cylindrical-lattice-based free-form deformation (FFD). The lattice-based approach allows efficient computation of deformation of complex geometries. But excessive deformation can cause visual anomalies such as surface infiltration and distortion. This paper derives a geometrically intuitive sufficient condition to guarantee that the FFD function is a homeomorphism and there is no self-intersection. The FFD function is defined by linear and quadratic B-Spline functions with the control points of the cylindrical lattice cell. The sufficient condition is satisfied if each trilinear function of the nine prism-shaped pentahedrons derived from the cell has a positive Jacobian determinant. The positivity is satisfied if the 12 tetrahedrons derived from the pentahedron have positive volumes. Based on the sufficient condition, the proposed method converts the self-intersection problem into a point-face collision detection and response problem suitable for dynamic simulation. The efficiency and accuracy of the self-intersection detection algorithm is analyzed and compared with a previous method. The results show that the proposed technique allows simulation of excessive deformation of tubular objects in an efficient and realistic manner.