Investigation of the changes in physical properties of PES/PVC fabrics after aging

The aim of this work was to investigate the physical and mechanical performance of architectural polyester (PES)–poly(vinyl chloride) (PVC) membranes exposed to different artificial aging conditions. Two commercially available architectural membranes were chosen as research objects. The durability of the PES/PVC fabrics was evaluated by the loss in mechanical performance, scanning electron microscopy, and X-ray diffraction analysis in order to understand the effect of the degradation agents on the surface of the membranes. The mechanical performance of the PES/PVC membranes was unchanged. Scanning electron microscopy images of the tested materials showed initial cracks after aging. The X-ray fluorescence analysis showed that at the time of aging, the amount of Cl and Si decreased slightly, while Ti decreased by half, and Ca by volume increased twice. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47523.     

A practical SPICE model based on the physics and characteristics of realistic single-electron transistors

A practical model for a single-electron transistor (SET) was developed based on the physical phenomena in realistic Si SETs, and implemented into a conventional circuit simulator. In the proposed model, the SET current calculated by the analytic model is combined with the parasitic MOSFET characteristics, which have been observed in many recently reported SETs formed on Si nanostructures. The SPICE simulation results were compared with the measured characteristics of the Si SETs. In terms of the bias, temperature, and size dependence of the realistic SET characteristics, an extensive comparison leads to good agreement within a reasonable level of accuracy. This result is noticeable in that a single set of model parameters was used, while considering divergent physical phenomena such as the parasitic MOSFET, the Coulomb oscillation phase shift, and the tunneling resistance modulated by the gate bias. When compared to the measured data, the accuracy of the voltage transfer characteristics of a single-electron inverter obtained from the SPICE simulation was within 15%. This new SPICE model can be applied to estimating the realistic performance of a CMOS/SET hybrid circuit or various SET logic architectures.     

Liquid chromatographic determination of five benzoylurea insecticides in fruit and vegetables

A liquid chromatographic (LC) method was developed to determine 5 benzoylureas--diflubenzuron, hexaflumuron, teflubenzuron, flufenozuron, and lufenuron--in peppers, tomatoes, eggplants, cucumbers, and oranges. Preparation of samples involve extraction with acetone and partitioning into dichloromethane-petroleum ether. A portion of this extract is cleaned up with a solid-phase extraction aminopropyl disposable column. With LC analysis using an RP-8-DB microbore column, acetonitrile-water (70 + 30, v/v) as mobile phase, and photodiode array detection at 254 nm, recovery and repeatability data were collected for the 5 benzoylureas on 4 vegetables and citrus in the range 0.04-2.0 mg/kg. Validated limits of detection and quantitation were 0.01 and 0.04 mg/kg, respectively. The method is reliable for routine analysis of vegetables and fruits.     

Migration of Intergranular Liquid Films and Formation of Core-Shell Grains in Sintered TiC–Ni Bonded to WC–Ni

When TiC–20 wt% Ni powder mixtures are sintered at 1400°C, relatively large TiC grains possibly containing some Ni form with near-equilibrium shapes. When these specimens are heat-treated again at 1400°C in contact with sintered WC–20 wt% Ni pieces, the liquid films between the TiC grains in the contact region migrate against their increasing curvatures, forming (Ti,W)C solid solution behind them. These migrating liquid films reverse their directions on further heat-treatment. As in other alloys, this liquid film migration must be driven by the coherency strain energy produced by W diffusion at the surface of the dissolving TiC grains. Shells of (Ti,W)C solid solution also form around the cores of TiC grains near the contact region, and this process is probably driven by both coherency strain energy and free energy of mixing. At some contact regions, (Ti,W)C precipitates nucleate and grow, probably driven mainly by the free energy of mixing. In powder mixtures, the formation of core-shell grains is expected to be driven by the coherency strain energy, the free energy of mixing, and the capillary effect.     

Fracture behavior of core‐shell rubber–modified clay‐epoxy nanocomposites

Morphology and fracture mechanisms in two nanoclay‐filled epoxy systems were investigated using both microscopy and spectroscopy tools. Clay exfoliation was achieved using a series of sample preparation steps, and confirmed using wide angle X‐ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. Significant improvement in modulus was obtained when clay exfoliation was achieved. Incorporation of core‐shell rubber (CSR) in both caly‐filled epoxy systems leads to greatly enhanced fracture toughness. Optical microscopy and TEM observations of the CSR‐modified nanocomposites suggest that CSR cavitation. shear yielding of the matrix, clay layer delamination. CSR bridging, crack bifurcation. and crack deflection are among the operative toughening mechanisms observed, depending on the nature of the epoxy matrix utilized.     

Process development for the removal of copper from wastewater using ferric/limestone treatment

The removal of copper from wastewater by ferric/limestone coagulation followed by screen filtration was carried out at a laboratory scale. The optimum coagulant (FeCl₃) dose and working pH were 50 mg// of Fe(m) and pH 7.5, respectively, through jar tests. For the efficient removal of copper from wastewater, we developed a novel process including the co-precipitation of copper with FeCl₃, alkalization in a limestone aeration bed, and separation of precipitates in a sedimentation tank coupled with internal stainless steel screen filter. The performance results showed that removal of copper from the solution was over 99.5%. The pH was effectively maintained over 7.5 in limestone bed during the whole process. Ferric hydroxide/copper aggregates were removed over 99% by stainless steel screen filter of 1,450 mesh. Periodic air backwashing alleviated fouling of the filter surface.     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

Faceting of High-Angle Grain Boundaries in Titanium-Excess BaTiO3

The grain boundaries in BaTiO₃ with excess Ti of 0.5, 0.3, and 0.1 at.% sintered at 1300° or 1250°C have been examined by scanning electron microscopy (SEM), electron backscattered diffraction pattern (EBSP), and transmission electron microscopy (TEM). In the 0.1% Ti-excess specimen, large grains growing abnormally form high-angle grain boundaries when they impinge on each other as verified by EBSP. A large fraction of these grain boundaries are faceted with hill-and-valley shapes. In the 0.5% Ti-excess specimen, large grains growing abnormally are elongated in the directions of their {111} double twins. These grains often form flat grain boundaries parallel to their {111} planes with the fine matrix grains, and the grain-boundary segments between the large impinging grains with high misorientation angles are often also parallel to the {111} planes of one of the grains. These grain boundaries are expected to be singular. Most of the grain boundaries between the randomly oriented fine-matrix grains in the 0.3 at.% Ti-excess specimen are also faceted with hill-and-valley shapes at finer scales when observed under TEM. The facet planes are parallel to {111}, {011}, and {012} planes of one of the grain pairs and are also expected to be singular. These high-angle grain boundaries lying on low index planes of one of the grain pairs are similar to those observed in other oxides and metals.     

Solution copolymerization of methyl methacrylate and alkyl methacrylates in a continuous stirred tank reactor(CSTR)

Continuous solution copolymerization of methyl methacrylate with ethyl methacrylate or n-butyl methacrylate was carried out in a continuous stirred tank reactor. Solvent and initiator used were toluene and benzoyl peroxide, respectively. Reaction volume was 1.2 litters, residence time 3 hours and polymerization temperature 80°C. The copolymerization conversions were analyzed by UV spectrophotometry and confirmed by measuring the solid weights of copolymers obtained after evaporating solvent. The copolymerization of methyl methacrylate and alkyl methacrylates followed the second order kinetics. The simulated conversions and copolymerization rates were compared with the experimental results. The average time to reach dynamic steady-state was three and half times of the residence time.