A complete VARMA modelling methodology based on scalar components

Abstract. This article proposes an extension to scalar component methodology for the identification and estimation of VARMA models. The complete methodology determines the exact positions of all free parameters in any VARMA model with a predetermined embedded scalar component structure. This leads to an exactly identified system of equations that is estimated using full information maximum likelihood.     

Fullerene: biomedical engineers get to revisit an old friend

1. Download high-res image (169KB)
2. Download full-size image

     

The synthesis of nano-sized ZSM-5 zeolite by dry gel conversion method and investigating the effects of experimental parameters by Taguchi experimental design

In this study ZSM-5 Nano particles with high crystallinity were synthesized using a dry gel conversion technique. An L9 orthogonal array of the Taguchi method was applied to investigate the effect of synthesis parameters, such as crystallization time, gel drying temperature, molar composition of template (TPAOH) and water content in the crystallization stage on crystallinity and particle size of the ZSM-5 catalyst. The products were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Beside short crystallization time, the particle sizes were considerably smaller in comparison with those prepared using the hydrothermal method. The results showed that the particle size and crystallinity increased with increasing water content and crystallization time. The effects of gel drying temperature and molar composition of template were found to be more complex, however. Comparing to hydrothermal method, ZSM-5 samples synthesized with the dry gel conversion exhibited higher selectivity to gasoline than other hydrocarbons.     

A new feature selection algorithm and composite neural network for electricity price forecasting

In a competitive electricity market, the forecasting of energy prices is an important activity for all the market participants either for developing bidding strategies or for making investment decisions. In this paper, a new forecast strategy is proposed for day ahead prediction of electricity price, which is a complex signal with nonlinear, volatile and time dependent behavior. Our forecast strategy includes a new two stage feature selection algorithm, a composite neural network (CNN) and a few auxiliary predictors. The feature selection algorithm has two filtering stages to remove irrelevant and redundant candidate inputs, respectively. This algorithm is based on mutual information (MI) criterion and selects the input variables of the CNN among a large set of candidate inputs. The CNN is composed of a few neural networks (NN) with a new data flow among its building blocks. The CNN is the forecast engine of the proposed strategy. A kind of cross-validation technique is also presented to fine-tune the adjustable parameters of the feature selection algorithm and CNN. Moreover, the proposed price forecast strategy is equipped with a few auxiliary predictors to enrich the candidate set of inputs of the forecast engine. The whole proposed strategy is examined on the PJM, Spanish and Californian electricity markets and compared with some of the most recent price forecast methods.     

Synthesis of highly isotactic poly 1-hexene using Fe-doped Mg(OEt)2/TiCl4/ED Ziegler–Natta catalytic system

In this article, polymerization of 1-hexene with FeCl_3-doped Mg(OET)₂/TiCl₄/electron donor (ED) catalytic system is presented. For this purpose, first a number of TiCl₄ catalysts supported on Mg(OEt)₂ and Fe-doped Mg(OEt)₂ supports were prepared with ethylbenzoate or dibutylphthalate as the internal EDs. After successive catalysts synthesis, they were employed in 1-hexene polymerization using cyclohexyl methyl dimethoxysilane as external ED as well as without it. The catalysts activity and molecular weight distribution (MWD) of poly 1-hexenes (PHs) were influenced strongly by both FeCl₃ doping and donor presence so that a remarkable increase in the catalyst activity was seen in doped catalysts. Deconvolution of MWD curves revealed that increase in the type of active centers by introducing FeCl₃ into the support should be responsible for the broadening of MWD of PHs. ¹³CNMR analysis indicated that while isotacticity does not change considerably by Fe doping, EDs increase its amount as high as 8–21%. Second, the stereoselective behavior of active Ti species in doped and undoped catalysts was fully explored by molecular modeling using density functional theory (DFT) method. Finally, with the aid of rheological measurements, the processability of polymers were evaluated and then the gel permeation chromatography (GPC) results were approved through the values obtained from model fitting as well as changes in moduli crossover modulus.     

Investigation of the microstructure and oxidation behavior of Cr-modified aluminide coatings on γ-TiAL alloys

The microstructure and oxidation behavior of aluminide coatings are investigated. The layers are examined by the optical microscopy, scanning electron microscopy (SEM) equipped with EDS, and the X-ray diffraction method. The isothermal oxidation behaviors of samples are investigated at 950°C for 200 h. The results show that TiAl₃ is formed on the substrate. In addition, the aluminide coating improves the oxidation resistance of γ-TiAl alloys by forming a protective alumina scale. Moreover, during oxidation treatment, the interdiffusion of the TiAl₃ layer with γ-TiAl substrate results in the depletion of aluminum in the TiAl₃ layer and the growth of the TiAl₂ layer. After the oxidation treatment, the coating layer preserves a microstructure with phases including TiAl₃, TiAl₂, and Al₂O₃.     

The relative performance of alternative oxygen carriers for liquid chemical looping combustion and gasification

The relative performance of different potential liquid oxygen carriers within a novel system that can be configured for either chemical looping gasification or combustion is assessed. The parameters considered here are the melting temperature, the Gibbs free energy, reaction enthalpy, exergy and energy flows, syngas quality and temperature difference between the two reactors. Results show that lead, copper and antimony oxides are meritorious candidates for the proposed systems. Antimony oxide was found to offer strong potential for high quality syngas production because it has a reasonable oxygen mass ratio for gasification. A sufficiently low operating temperature to be compatible with concentrated solar thermal energy and a propensity to generate methane. In contrast, copper and lead oxides offer greater potential for liquid chemical looping combustion because they have higher oxygen mass ratio and a higher operating temperature, which enables better efficiency from a power plant. For all three metal oxides, the production of methane via the undesirable methanation reaction is less than 2% of the product gasses for all operating temperatures and an order of magnitude lower for lead.     

Quantitative characterization of carrier injection across metal–organic interfaces using Bardeen theory

We have investigated the contact between a metal and an organic/polymeric (o/p) material and we have introduced a relation for carrier injection using Bardeen theory. A series of narrow barriers is considered in the semiconductor side to account for the localized nature of the carriers in the o/p material. As an application of the model, we have calculated the hopping rate of carriers in terms of the contact parameters. Also, we have discussed the hopping of carriers deep into the organic dielectric. Finally, we have explored the hopping rate in practical contacts between polyfluorene-based polymers and different electrodes.     

Novel NGR anchored pullulan micelles for controlled and targeted delivery of doxorubicin to HeLa cancerous cells

Doxorubicin (DOX) is used to treat different kinds of cancers, including cervix carcinoma. However, it has various side effects such as cardiotoxicity. Nano-sized controlled releasing carriers such as polymeric micelles are of interesting approaches to overcome these side effects of doxorubicin in cancer chemotherapy. Regarding the up-regulation of CD13/APN receptors on the cervix carcinoma cells, which can bind to peptide sequences specially NGR (asparagine–glycine–arginine) with high affinity, peptide sequence (NGR) targeted micelles would lead to effective treatment of this carcinoma. In this study, the NGR peptide sequence was synthesized using the solution-phase strategy from asparagine, glycine, and arginine residues. The pullulan–retinoic acid conjugate and pullulan–retinoic acid–NGR conjugate were prepared by the amide and ester bond formation between the hydroxyl groups of pullulan and carboxylic acid groups of retinoic acid and peptide sequence. Pullulan–retinoic acid–NGR micelles were prepared by the direct dissolution method. The optimized micelles, according to their particle size (124.5 nm), zeta potential (? 3.65 mV), entrapment efficiency (85%), and release of DOX (70%, within 72 h) were assessed for their cytotoxicity on HeLa cells using MTT assay. NGR-targeted pullulan/retinoic acid micelles had higher cytotoxicity than the free DOX in cell culture studies on the HeLa cell line, and this can be a promising result in the treatment of cervix carcinoma.     

Thermosensitive folic acid-targeted poly (ethylene-<Emphasis Type="Italic">co</Emphasis>-vinyl alcohol) hemisuccinate polymeric nanoparticles for delivery of epirubicin to breast cancer cells

A novel thermosensitive folic acid (FA)-targeted succinylated poly (ethylene-co-vinyl alcohol) (EVOH) (EVOHS-FA) nanocarrier was synthesized for the specific delivery of epirubicin (EPI) to MCF-7 breast cancer cell line. Three different ratios of synthesized EVOH-Suc were reacted with FA. The structure of the desired products (EVOHS₄₀-FA, EVOHS₆₀-FA and EVOHS₈₀-FA) was confirmed by ¹H NMR and FTIR techniques. Nanoparticles were obtained by nano-precipitation procedure using DMSO/H₂O as solvent/anti-solvent. The particle size, zeta potential, entrapment efficacy and in vitro release profile of the final formulations in different temperatures were measured. The optimized nanoparticles had the particle size of 214 ± 8.5 nm, zeta potential of ?29.6 mV, PDI of 0.198 ± 0.04, and a high encapsulation efficiency that released the drug efficiently within 450 h at the temperature of 40 °C compared to 37 °C. The morphology of nanoparticles was studied by scanning electron microscopy. The in vitro cytotoxicity was evaluated using the MTT assay on MCF-7 cell lines in response to temperatures of 37 and 40 °C. The MTT assay indicated that the targeted nanoparticles carrying EPI were significantly more cytotoxic than the non-targeted nanoparticles and the free drug at 40 °C.