Effects of unequal reactivity of functional groups on gelation phenomena in polyurethane systems

A model to describe the effect of unequal reactivity on curing of a diisocyanate with water, polyol and a diol was developed. The model predicts whether a given initial composition would gel or not and the fractional conversions of functional groups at the gel point. It has been shown that the relative speeds of reaction of water and hydroxyl groups can be used to classify water's behaviour as that of a (i) nonreactive diluent (ii) monofunctional blocking agent and (iii) chain extender capable of connecting branch points.     

The effect of 9-beta-D-arabinofuranosyl-2-fluoroadenine and 1-beta-D-arabinofuranosylcytosine on the cell cycle phase distribution, topoisomerase II level, mitoxantrone cytotoxicity, and DNA strand break production in K562 human leukemia cells

The UvrA and UvrB proteins form part of the UvrABc endonuclease, which is responsible for nucleotide excision repair in Escherichia coli. Using a mobility shift gel assay we have studied the binding of UvrA dimer, UvrB monomer and UvA(2)B trimer complexes with 40, 50 and 136 bp (32)P-end-labelled DNA fragments adducted with aflatoxin B(1). UvrA was shown to re-associate with adduct specific UvrB: DNA complexes, a phenomenon which could be reversed by the addition of 500 mM potassium chloride or anti-UvrA anti-sera. Re-association was shown to be UvrA concentration dependent. Re-association of UvrA(2)B to the UvrB:DNA complex was not seen. We have also shown that the UvrB:DNA complex, in the case of aflatoxin B(1), is extremely stable with a half-life excess of 400 min and that fragment termini are not a specific substrate for UvrA binding.     

Neural networks for signal detection in non-Gaussian noise

We employ neural networks to detect known signals in additive non-Gaussian noise. Training of the neural network for signal detection and its operation at some specified probability of false alarm are discussed. Performance of neural detectors are presented under several non-Gaussian noise environments and are compared with those of matched filter and locally optimum detectors     

Numerical simulation of annular-phased arrays of dipoles forhyperthermia of deep-seated tumors

We have used the finite-difference time domain (FDTD) method to calculate the SAR distributions from an annular-phased array of eight dipole antennas coupled through water "boluses" in anatomically based three-dimensional models of the human body. We evaluated the effect of tapered bolus chambers, frequency (100-120 MHz), dipole length (17-30 cm), and phase and amplitude of power to the various dipoles on the ability to focus energy in the region of deep-seated tumors in the prostate and the liver. Assuming tumor conductivity and permittivity to be similar or slightly higher than surrounding normal tissues, calculations indicate that adjustment of the noted parameters should result in considerable improvement in focusing of SAR distributions in tumor-bearing regions. If such calculations can be shown to correctly predict empirical measurements from complex inhomogeneous (although not necessarily anatomically correct) phantoms, they may be useful for hyperthermia treatment planning based on patient-specific anatomic models.     

Improved corrosion protection of aluminum alloys by electrodeposited silanes

Organofunctional silanes recently have emerged as outstanding, environmentally friendly corrosion protectors for metal substrates, compared with conventional chromate treatments. A simple immersion technique is typically used to coat the metal surface with silane films. However, the thickness and uniformity of the films are uncontrolled in this process. This paper proposes a new deposition technique for the silane films on the metal surface, i.e., by electrodeposition. Hydrolyzed silanes are water-soluble, ionized molecules, so they can be deposited on metals by electrodeposition. Various combinations of silane mixtures were tested at different voltages, pH values, bath concentrations, and exposure times on panels of alloy aluminum and mirror-polished ferro-plate. The surface structure was characterized by scanning electron microscopy (SEM) and ellipsometry. The resistance of the film to corrosion was investigated by direct current (DC) polarization and electrochemical impedance spectroscopy (EIS) techniques. Electrodeposition results in a more organized and uniform film with fewer pores, compared with immersed or dipped films. This paper was presented at the 2nd International Surface Engineering Congress sponsored by ASM International, on September 15–17, 2003, in Indianapolis, Indiana, and appears on pp. 320–26 of the Proceedings.     

The influence of sulfur dioxide on propane oxidation activity over supported platinum and palladium

Earlier studies have shown that sulfur dioxide and metal-support interaction can strongly influence propane oxidation over platinum. In particular, oxidation activity is enhanced when platinum is supported on sulfated -alumina or zirconia compared to -alumina. Therefore, it is of interest to compare the performance of palladium under the same experimental conditions. Four model catalysts were examined: Pt/-alumina, Pt/zirconia, Pd/-alumina and Pd/zirconia. The metal loading was kept at or below 0.05 wt% to emphasize changes in activity attributable to metal-support interaction. Reaction rates were measured with and without sulfur dioxide. Surface sulfation was analyzed by measuring acid strength and evaluating spectra obtained by Fourier-transform infrared spectroscopy. In contrast to platinum, sulfation does not promote propane oxidation on Pd/-alumina, and Pd/zirconia is less active than Pd/-alumina.     

Ultrasound-assisted preparation of novel ibuprofen-loaded excipient with improved compression and dissolution properties

Context: Most of the active pharmaceutical ingredients (APIs) suffer from a drawback of poor aqueous solubility. In addition to the same, some APIs show poor tabletting behavior creating problems in formulation development. Crystal engineering can be an efficient tool in rectification of such problems associated with the APIs. Thus present work deals with crystallization of ibuprofen (a model drug) onto the surface of dicalcium phosphate (DCP) particles using different techniques.

Objective: The objective of the present work was to prepare ibuprofen-loaded DCP particles and further to analyze them for compressibility and dissolution behavior.

Materials and methods: Various crystallization techniques such as solvent evaporation (SE), melt crystallization (MC), melt sonocrystallization (MSC), antisolvent crystallization (AC), and antisolvent sonocrystallization (ASC) were screened for the preparation of ibuprofen-loaded DCP. Products obtained from different techniques were analyzed for physicochemical, micromeritic and compression properties.

Results and discussion: ASC technique was found to be suitable for preparing directly compressible ibuprofen-loaded DCP particles. The change in the crystal habit (needle to plate shape) of ibuprofen and its crystallization in miniscular form onto the surface of DCP particles showed significant improvement in the dissolution rate and compression properties of ibuprofen due to an increase in specific surface area when compared with ibuprofen crystallized by other techniques. Additionally, the tablets prepared from ASC powder did not require binder since ibuprofen acted as melt binder during compression.

Conclusion: Directly compressible ibuprofen-loaded DCP particles can serve as an alternative for conventional ibuprofen tablets prepared by wet granulation technique.     

Formulation and development of ophthalmic in situ gel for the treatment ocular inflammation and infection using application of quality by design concept

Context: The conventional liquid ophthalmic delivery systems exhibit short pre-corneal residence time and the relative impermeability to the cornea which leads to poor ocular bioavailability.

Objective: The aim of this study was to apply quality by design (QbD) for development of dexamethasone sodium phosphate (DSP) and tobramycin sulfate (TS)-loaded thermoresponsive ophthalmic in situ gel containing Poloxamer 407 and hydroxyl propyl methyl cellulose (HPMC) K4M for prolonging the pre-corneal residence time, ocular bioavability and decreases the frequency of administration of dosage form. The material attributes and the critical quality attributes (CQA) of the in situ gel were identified. Central composite design (CCD) was adopted to optimize the formulation.

Materials and methods: The ophthalmic in situ forming gels were prepared by cold method. Materials attributes were the amount of Poloxamer 407 and HPMC and CQA identified were Gel strength, mucoadhesive index, gelation temperature and % of drug release of both drug.

Results and discussion: Optimized batch (F*) containing 16.75% poloxamer 407 and 0.54% HPMC K4M were exhibited all results in acceptable limits. Compared with the marketed formulation, optimized in situ gel showed delayed T_max, improved C_max and AUC in rabbit aqueous humor, suggesting the sustained drug release and better corneal penetration and absorption.

Conclusion: According to the study, it could be concluded that DSP and TS would be successfully formulated as in situ gelling mucoadhesive system for the treatment of steroid responsive eye infections with the properties of sustained drug release, prolonged ocular retention and improved corneal penetration.     

Interpolation of images using discrete wavelet transform to simulate image resizing as in human vision

This paper presents discrete wavelet transform (DWT) and its inverse (IDWT) with Haar wavelets as tools to compute the variable size interpolated versions of an image at optimum computational load. As a human observer moves closer to or farther from a scene, the retinal image of the scene zooms in or out, respectively. This zooming in or out can be modeled using variable scale interpolation. The paper proposes a novel way of applying DWT and IDWT in a piecewise manner by non-uniform down- or up-sampling of the images to achieve partially sampled versions of the images. The partially sampled versions are then aggregated to achieve the final variable scale interpolated images. The non-uniform down- or up-sampling here is a function of the required scale of interpolation. Appropriate zero padding is used to make the images suitable for the required non-uniform sampling and the subsequent interpolation to the required scale. The concept of zeroeth level DWT is introduced here, which works as the basis for interpolating the images to achieve bigger size than the original one. The main emphasis here is on the computation of variable size images at less computational load, without compromise of quality of images. The interpolated images to different sizes and the reconstructed images are benchmarked using the statistical parameters and visual comparison. It has been found that the proposed approach performs better as compared to bilinear and bicubic interpolation techniques.