Insights into low-carbon hydrogen production methods: Green,blue and aqua hydrogen

The primary aim of this study is to provide insights into different low-carbon hydrogen production methods. Low-carbon hydrogen includes green hydrogen (hydrogen from renewable electricity), blue hydrogen (hydrogen from fossil fuels with CO₂ emissions reduced by the use of Carbon Capture Use and Storage) and aqua hydrogen (hydrogen from fossil fuels via the new technology). Green hydrogen is an expensive strategy compared to fossil-based hydrogen. Blue hydrogen has some attractive features, but the CCUS technology is high cost and blue hydrogen is not inherently carbon free. Therefore, engineering scientists have been focusing on developing other low-cost and low-carbon hydrogen technology. A new economical technology to extract hydrogen from oil sands (natural bitumen) and oil fields with very low cost and without carbon emissions has been developed and commercialized in Western Canada. Aqua hydrogen is a term we have coined for production of hydrogen from this new hydrogen production technology. Aqua is a color halfway between green and blue and thus represents a form of hydrogen production that does not emit CO₂, like green hydrogen, yet is produced from fossil fuel energy, like blue hydrogen. Unlike CCUS, blue hydrogen, which is clearly compensatory with respect to carbon emissions as it captures, uses and stores produced CO₂, the new production method is transformative in that it does not emit CO₂ in the first place. In order to promote the development of the low-carbon hydrogen economy, the current challenges, future directions and policy recommendations of low-carbon hydrogen production methods including green hydrogen, blue hydrogen, and aqua hydrogen are investigated in the paper.     

Tree-to-tree variation in stearic and oleic acid content in seed fat from Allanblackia floribunda from wild stands: Potential for tree breeding

We determined whether Allanblackia floribunda, a forest tree species that is valued for the fat extracted from its seeds, could be genetically improved for fruit/seed production by sampling 17–40 fruits from each of 70 trees that were distributed among four sites in wild stands. Fat was extracted from the seeds, and stearic and oleic acid content of the fat was estimated. Highly significant (P < 0.0001) between- and within-tree variation characterised fruits and seed characters. Between-site phenotypic variation was not significant. Stearic and oleic acid percentages in seed fat ranged from 44.16% to 66.12%, and from 24.95% to 48.42% per tree sample, respectively. Moderate repeatabilities were identified in fruit characters and mean seed mass. Moderate positive relationships were found between stearic and oleic acid percentages. Seed fat profiles were not found to vary with other fruit characters. Twenty “plus trees” were selected for breeding.     

Histological and biomechanical analysis of bone and interface reactions around hydroxyapatite-coated intramedullary implants of different stiffness: a pilot study on the goat

We hypothesized that reduced stem stiffness of orthopaedic implants contributes to a high risk of loosening, since interface stresses and relative motions may exceed a tolerable range. To study this hypothesis, three types of load-bearing implant with different stiffnesses were inserted into the tibia of the goat. Histological analysis was performed of bone repair after insertion of the implant, bone ingrowth, interface disruption and loosening. A finite element model of the configuration provided the quantitative range of interface stresses and relative motions for the present experiment. The implants were made out of stainless steel, hollow titanium and a thin titanium core covered with a polyacetal coating. The stiffness ratios of these implants were approximately 10:4:1, respectively. All implants were coated with a layer of hydroxyapatite (HA) in order to minimize the possible biological effects of the different implant materials. Irrespective of the type of implant, there was a repair phase that lasted 6-12 weeks. The stiff implants functioned well. Large areas of bone bonding to the HA layer were found after the repair phase at 12 weeks postoperatively. After 24 weeks, some signs of loosening were observed. More loosening occurred with the hollow titanium and polyacetal implants, mainly during the repair phase. Three hollow titanium and three polyacetal coated implants survived this period, and were killed after 24 weeks. The integrity of the HA layer at the bone-implant interface of the titanium implants was good. In the polyacetal implants, the repair reaction of the cortical bone was incomplete. Bone ingrowth into HA was largely lacking. In conclusion, we found significant differences in the repair and interface reactions around implants of different stiffness. Stiff implants showed favourable initial interface conditions for bone ingrowth. Intermediate and flexible implants provoked unfavourable interface conditions for initial bone ingrowth. The finite element study showed that the flexible stems produce larger micromotions and higher interface stresses at the bone-prosthesis interface than the stiff stems, indicating an explanation for the histological findings.     

Environment-dependent indentation recovery of select soda-lime silicate glasses

Indentations made on silicate glasses can easily be affected by the environment. In the present work, indentations were made on select commercial float glasses as well as on experimental soda-lime silicate glasses using a 1 mm diameter spherical tungsten carbide ball-mounted Brinell indenter. Recovery of indentations made on the glass samples was measured in different environments, namely, 100 °C, room temperature/room humidity and 100% relative humidity, as a function of time by using a Zygo laser non-contact profiliometer. Elastic (Young's modulus, bulk modulus, shear modulus and Poisson's ratio) and indentation (Vickers hardness, fracture toughness, brittleness and fracture surface energy) properties of the glasses were also determined by a pulse-echo and Vickers indentation methods, respectively, to correlate with the recovery of indentations. The elastic properties and Vickers hardness are directly proportional to the packing ions present in the glass structure and the strength of an individual bond, whereas the brittleness and fracture toughness more likely depend on molar volume of the glasses. According to the applied environment, a recovery rate of indentations follows the order: room temperature/room humidity <100% relative humidity <100 °C, regardless of glass composition. The reason for higher recovery rate of indentations is attributed to the structural relaxation, which is promoted by a thermodynamic driving force at 100 °C, and stored strain energy in deformation zone, allowing the indentations to regain their original configurations at certain points.     

Ball-on-Ring Test Revisited

A literature survey indicates that the ball-on-ring test is the best biaxial strength testing method. There is, however, some controversy in the calculation of the strength. In this communication, the theroretical controversy of the ball-on-ring test is resolved by strain and deflection analysis. Consequently, the ball-on-ring test can be used as a reliable method for testing the strength of flat brittle specimens.     

Multiscale characterization of pathological bone tissue

Bone is a complex natural material with a complex hierarchical multiscale organization, crucial to perform its functions. Ultrastructural analysis of bone is crucial for our understanding of cell to cell communication, the healthy or pathological composition of bone tissue, and its three-dimensional (3D) organization. A variety of techniques has been used to analyze bone tissue. This article describes a combined approach of optical, scanning electron, and transmission electron microscopy for the ultrastructural analysis of bone from the nanoscale to the macroscale, as illustrated by two pathological bone tissues. By following a top-down approach to investigate the multiscale organization of pathological bones, quantitative estimates were made in terms of calcium content, nearest neighbor distances of osteocytes, canaliculi diameter, ordering, and D-spacing of the collagen fibrils, and the orientation of intrafibrillar minerals which enable us to observe the fine structural details. We identify and discuss a series of two-dimensional (2D) and 3D imaging techniques that can be used to characterize bone tissue. By doing so we demonstrate that, while 2D imaging techniques provide comparable information from pathological bone tissues, significantly different structural details are observed upon analyzing the pathological bone tissues in 3D. Finally, particular attention is paid to sample preparation for and quantitative processing of data from electron microscopic analysis.     

Evaluation of measures to mitigate mineral oil migration from recycled paper in food packaging

The presence of mineral oil saturated hydrocarbons (MOSH) and aromatic hydrocarbons (MOAH) in food is a safety concern. Migration to food from recycled paper and board is a relevant source of MOSH and MOAH, and the potential of several technologies to reduce it was explored. These technologies were assessed for food safety (people), environment (planet) and economy (profit) in an integrated way, using a framework developed to compare the effect of the technologies with the current state of the art. Two mature technologies were evaluated (MB12 and flotation), two in development (supercritical CO₂ and thermal treatment), and two as a concept (anionic trash catchers and functionalized clays). The use of mineral-oil-free inks for printing newspapers was also evaluated. It was concluded that, although it is desirable to apply mineral-oil-free inks, in the short-term reduction technologies have more impact. All technologies of which the effectiveness could be investigated (MB12, flotation, supercritical CO₂ and thermal treatment) are able to reduce the potential migration of mineral oils by >70%, but none score optimally on all indicators. The MB12 technology shows the best overall performance and is ready for implementation, provided its patent will be available to more parties. Supercritical CO₂ performs best on food safety, but environmental and economic performance has to be improved. The developed assessment framework yields a clear overview of the advantages and disadvantages of the technologies. Based on the assessment, recommendations are made to stakeholders, including the recycling industry, the ink and printing industry, the food industry and research institutes.     

Entry requirements for professional practice of psychology.

Applicants for licensure as professional psychologists frequently encounter frustration and disappointment caused by failure to pass the requirements for licensure. To avoid difficulties in the licensing process, potential licensees are advised to become thoroughly familiar with the requirements of the law in their jurisdictions and to seek broad educational experiences equivalent to those available in training and internship programs approved by the American Psychological Association. The content of examinations for licensure is discussed, with particular attention to the Examination of Professional Practice in Psychology, the national examination prepared by the American Association of State Psychology Boards. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cohort differences in Big Five personality factors over a period of 25 years.

The notion of personality traits implies a certain degree of stability in the life span of an individual. But what about generational effects? Are there generational changes in the distribution or structure of personality traits? This article examines cohort changes on the Big Five personality factors Extraversion, Agreeableness, Conscientiousness, Neuroticism, and Openness to Experience, among first-year psychology students in the Netherlands, ages 18 to 25 years, between 1982 and 2007. Because measurement invariance of a personality test is essential for a sound interpretation of cohort differences in personality, we first assessed measurement invariance with respect to cohort for males and females separately on the Big Five personality factors, as measured by the Dutch instrument Five Personality Factors Test. Results identified 11 (females) and 2 (males) biased items with respect to cohort, out of a total of 70 items. Analyzing the unbiased items, results indicated small linear increases over time in Extraversion, Agreeableness, and Conscientiousness and small linear decreases over time in Neuroticism. No clear patterns were found on the Openness to Experience factor. Secondary analyses on students from 1971 to 2007 of females and males of different ages together revealed linear trends comparable to those in the main analyses among young adults between 1982 onward. The results imply that the broad sociocultural context may affect personality factors. (PsycINFO Database Record (c) 2011 APA, all rights reserved)