Comparative analysis of formaldehyde and toluene sorption on indoor floorings and consequence on Indoor Air Quality

Indoor surfaces may be adsorptive sinks with the potential to change Indoor Air Quality. To estimate this effect, the sorption parameters of formaldehyde and toluene were assessed on five floorings by an experimental method using solid-phase microextraction in an airtight emission cell. Adsorption rate constants ranged from 0.003 to 0.075 m·h⁻¹, desorption rate constants from 0.019 to 0.51 h⁻¹, and the partition coefficient from 0.005 to 3.9 m, and these parameters vary greatly from one volatile organic compound/material couple to another indicating contrasted sorption behaviors. A rubber was identified as a sink of formaldehyde characterized by a very low desorption constant close to 0. For these sorbent floorings identified, the adsorption rates of formaldehyde are from 2 to 4 times higher than those of toluene. Two models were used to evaluate the sink effects of floorings on indoor pollutant concentrations in one room from different realistic conditions. The scenarios tested came to the conclusion that the formaldehyde sorption on one rubber (identified as a sink) has a maximum contribution from 15% to 21% for the conditions of low air exchange rate. For other floorings, the sorption has a minor contribution less than or equal to 5%, regardless of the air exchange rate.     

Physical design of the VCI wrappers for the on-chip packet-switched network named SPIN

This paper presents the physical design methodology of the VCI/SPIN wrappers. The challenge was the validation of the wrappers’ specification with Alliance CAD Tools.A wrapper is a standard gateway used by a subscriber to access an interconnect. Because there are as many wrappers as subscribers, it is relevant to have an estimation of the wrapper’s area, its frequency and then compare these results to the router’s.The interest to perform this study with academic tools is to show that commercial tools are not the unique way for experimentations.     

Efficient algorithms for singleton arc consistency

In this paper, we propose two original and efficient approaches for enforcing singleton arc consistency. In the first one, the data structures used to enforce arc consistency are shared between all subproblems where a domain is reduced to a singleton. This new algorithm is not optimal but it requires far less space and is often more efficient in practice than the optimal algorithm SAC-Opt. In the second approach, we perform several runs of a greedy search (where at each step, arc consistency is maintained), possibly detecting the singleton arc consistency of several values in one run. It is an original illustration of applying inference (i.e., establishing singleton arc consistency) by search. Using a greedy search allows benefiting from the incrementality of arc consistency, learning relevant information from conflicts and, potentially finding solution(s) during the inference process. We present extensive experiments that show the benefit of our two approaches.     

On the application of the Kramers-Kronig relations to problems concerning the frequency dependence of electrode impedance

It is emphasized that, under certain conditions, the frequency dependences of the real and imaginary parts of an electrical impedance are correlated by the Kramers-Kronig relations. The importance of these relations in electrochemistry is illustrated by the examples of certain electrochemical impedance types. Some misapprehensions appearing in the electrochemical literature are pointed out.     

MERIS observations of chlorophyll-a dynamics in Erhai Lake between 2003 and 2009

The Medium Resolution Imaging Spectrometer (MERIS) was used to investigate the spatial and temporal dynamics of chlorophyll-a (chl-a) in Erhai Lake, the second largest freshwater lake in the Yunnan province of China. Six chl-a retrieval models, including four Basic ERS & Envisat (A)ATSR and Meris Toolbox (BEAM) software-incorporated algorithms and MERIS three-band and two-band models, were validated to find the best fit to extract chl-a concentration in Erhai Lake. With a chl-a range of 5–15 mg m^–3, the Lakes/Eutrophic method showed the best performance. The algorithm was then applied to eight-year cloud-free MERIS images between 2003 and 2009, with seasonal and inter-annual variability analysed. Long-term chl-a distributions of Erhai Lake revealed significant seasonal and inter-annual variability. The mean chl-a of the south lake was higher in summer (14.3 mg m^–3) than in spring (10.1 mg m^–3), while generally lower chl-a was found in the north lake with a mean chl-a of 6.4 mg m^–3 in spring and 9.0 mg m^–3 in summer, respectively. An increasing trend was found between 2006 and 2009, and the increasing rate was 12.9% for annual chl-a of the entire lake. While chl-a seasonality was attributed to the seasonal changes of the local temperature, the inter-annual variation was possibly linked to the discharged wastewater from Dali City. This work could provide critical information for decision-makers to manage Erhai Lake’s aquatic ecosystems.     

Microstructural foundations of the strength and resilience of LLDPE artificial turf yarn

The production of linear low‐density polyethylene (LLDPE) yarns for artificial turf is an advanced extrusion process, which relies heavily on the polymer's semicrystalline structure and inherent strengthening mechanisms to obtain the tailored mechanical properties so typical for turf yarns: a combination of strength and resilience. This review aims to bring together all relevant aspects in the structure–materials–processing interaction triangle which is so strongly in evidence in this application, by first summarizing the specific structural origins of the properties of the semicrystalline LLDPE and then discussing how structure evolves during the different steps of the production process, to eventually come to the final product properties of the yarn. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44080.     

长距离、低成本采购可能会占用流动资金

据工信部日前最新消息：今年上半年，我国西部地区水泥产量为2．3亿吨，同比增长25．9％，增速远高于东部和中部地区。但西部地区水泥出厂价格则呈持续下降态势。     

Development of GIS-Based Model to Estimate Relative Reductions in Crop Yield due to Salinity and Waterlogging

A model is introduced that utilizes geographic information systems (GIS) to predict relative reductions in crop yield due to salinity and waterlogging at a field-scale by incorporating spatially and temporally variable crop, climatic, and irrigation data to simulate crop yields. This model utilizes soil and water data commonly collected in field-scale studies. The model’s algorithms are integrated into a GIS (ARCVIEW 3.2) as an extension. The result is a model that does not require extraordinary data collection but will provide practical insight into the spatial effects of salinity and waterlogging on crop yields.     

Comparison of autologous bone marrow transplantation and intensive chemotherapy as postremission therapy in adult acute myeloid leukemia. The Groupe Ouest Est Leucémies Aigu?s Myéloblastiques (GOELAM)

Three intensive consolidation strategies are currently proposed to younger adults with acute myeloid leukemia (AML) in first complete remission (CR): allogeneic or autologous bone marrow transplantation (BMT) and intensive consolidation chemotherapy (ICC). Patients aged 15 to 50 years with de novo AML received an induction treatment with 7 days of cytarabine and either idarubicin or rubidazone. After achievement of a CR, patients up to the age of 40 and having an HLA-identical sibling were assigned to undergo an allogeneic BMT. All the other patients received a first course of ICC with high-dose cytarabine and the same anthracycline as for induction. They were then randomly assigned to either receive a second course of ICC with amsacrine and etoposide or a combination of busulfan and cyclosphosphamide followed by an unpurged autologous BMT. Of 517 eligible patients, 367 had a CR, but only 219 (59.5%) actually received the planned intensive postremission treatment (73 allogeneic BMT, 75 autologous BMT, and 71 ICC). With a median follow-up of 62 months, the 4-year disease-free survival (DFS) of the 367 patients in CR was 39.5%. The 4-year overall survival (OS) of the 517 eligible patients was 40.5%. In multivariate analysis, DFS and OS were influenced only by the initial white blood cell count and by the French-American-British classification. The type of postremission therapy had no significant impact on the outcome. There was no difference in the 4-year DFS and OS between 88 patients for whom an allogeneic BMT was scheduled (respectively, 44% and 53%) and 134 patients of the same age category and without an HLA-identical sibling (respectively, 38% and 53%). Similarly, there was no difference in the outcome between autologous BMT and ICC. The 4-year DFS was 44% for the 86 patients randomly assigned to autologous BMT and 40% for the 78 patients assigned to ICC (P = .41). The 4-year OS was similar in the two groups (50% v 54.5%, P = .72). The median duration of hospitalization and thrombocytopenia were longer after autologous BMT (39 v 32 days, P = .006, and 109.5 v 18.5 days, P = .0001, respectively). After a first course of ICC, a second course of chemotherapy is less myelotoxic than an unpurged autologous BMT but yields comparable DFS and OS rates.     

Study of electron traps in the thin interfacial oxide layer of Al-, Au- and Sn-n GaAs Schottky barriers by detrapping experiments

Electron traps in MIS-type Schottky barriers on n-GaAs were investigated by measuring the change of the flat-band voltage, due to detrapping, as a function of time. The trap depth and the capture cross section for a particular trap were obtained from the temperature dependence of the time constant for detrapping. It was found that the detrapping process in some cases is a two-state thermionic emission and tunneling process. For other trapping levels the results indicated clearly that the mechanism was different from the thermionic emission and tunneling process.