Vapor absorption by LiBr aqueous solution in vertical smooth tubes

Heat and mass transfer in a falling film vertical in-tube absorber was studied experimentally with LiBr aqueous solution. The presented results include the effect of solution flow rate, solution subcooling and cooling water temperature on the absorption in a smooth copper tube 16.05 mm I.D. and 400 mm long. The experimental data in the previous report for a 1200-mm-long tube was also re-examined and compared. It was demonstrated by the observation of the flow in the tube that the break down of the liquid film into rivulets leads to deterioration of heat and mass transfer at lower film Reynolds number or in longer tubes. An attempt to evaluate physically acceptable heat and mass transfer coefficients that are defined with estimated temperature and concentration at the vapor–liquid interface was also presented.     

Preparation of micrometer‐sized,monodisperse, magnetic polymer particles

Micrometer‐sized, monodisperse, magnetic composite particles were prepared by heating micrometer‐sized, monodisperse, hollow polystyrene/polydivinylbenzene composite polymer particles at 200°C for 4 h (particles had been dipped in pentacarbonyliron) and then washed in 12 N HCl and water. The hollow polymer particles were produced by seeded polymerization by the dynamic swelling method that was proposed by authors. The magnetic composite particles contained Fe₃O₄, the content of which was 49% based on total weight, and were attracted easily in water by a 1650 G magnet. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 428–433, 2003     

Microscopic fatigue processes in a plain-weave glass-fibre composite

This paper focuses on the microscopic damage and progressive failure of a composite reinforced by plain-weave glass cloth under tensile fatigue loading. The fatigue process was divided into three stages like that of multi-directional laminates. It was found that the internal damage at each stage (matrix cracks, debonds in the weft, successive debonds in the warp and ‘metadelaminations’ between warps and wefts) occurred near the cross-over point of the fabric. The modulus decay mechanism was explained by considering the progression of this internal damage. From the end of the first stage to the beginning of the middle stage, a characteristic damage state (CDS) (called a ‘meta-CDS’) was observed. It was found that woven composites have a unit area of damage accumulation (called a ‘unit cell’) and the damage of each unit cell and its distribution control the total fatigue damage of the material.     

Analysis of an Electromagnetic Field Created by Line Current Using Constrained Interpolation Profile Method

Development of accurate schemes is a technical issue related to calculation of electromagnetic fields. This study uses constrained interpolation profile (CIP) method to analyze electromagnetic fields created by line current. This is a novel method proposed by Yabe. Comparison of results obtained using finite difference time domain (FDTD) analysis and CIP analysis indicates that CIP analysis provides higher accuracy using identical discretization. In addition, given the same level of accuracy, CIP analysis requires less memory and less calculation time     

Suppression of photo-induced dilation in cyanide treated hydrogenated amorphous silicon films

Effects of cyanide (CN) treatment with hydrogenated amorphous silicon (a-Si:H) films have been investigated. The decrease of ΔV/V was observed in cyanide treated a-Si:H films and the successive thermal annealing at 200°C after CN treatment induced the further reduction of the ΔV/V. XPS spectra show the indirect evidence that the cyanide species is present within 10 nm from the hydrogenated amorphous silicon surface. The results of CN treatment with a-Si:H solar cells are demonstrated.     

Mortality of chromium plating workers in Japan--a 16-year follow-up study

Opportunistic infections are common and major causes of morbidity in patients with AIDS. Endemic mycoses pose serious risks for patients in certain parts of the world. Histoplasmosis occurs in 2-5% of patients with AIDS in the Ohio and Mississippi River valleys of the United States and in over 25% of patients from a few cities. Antigen testing has become a highly useful method for diagnosing histoplasmosis rapidly, evaluating the response to treatment and diagnosing relapse. Treatment with amphotericin B or itraconazole is effective (90% or higher) if the patient is not seriously ill at the time of diagnosis but the mortality approaches 50% for those with multiorgan failure. Itraconazole blood levels should be monitored and drugs that impair the absorption or accelerate the metabolism of itraconazole should be avoided. Prophylaxis with itraconazole may be appropriate in areas with an incidence of histoplasmosis. A recently completed study in cities which have unusually high rates of histoplasmosis will provide greater insight into the role of prophylactic antifungal therapy.     

Preparation of γ-alumina thin membrane by sol-gel processing and its characterization by gas permeation

-alumina porous membranes without pinholes or cracks were prepared by the sol-gel process. The boehmite sol obtained from hydrolysation of aluminium isopropoxide was applied to the inner surface of a porous supporting tube by a dipping procedure. The effects of sol concentration and the repetition number of dipping-drying-firing procedure on the membrane performance were investigated by scanning electron microscopy, X-ray diffraction and the Brunauer-Emmett-Teller method in connection with the micro-structure of the membrane. Gas permeation measurements were also conducted. The gas permeation through the thin membranes is well explained by Knudsen's flow, indicating the pores are controlled finely and homogeneously.     

Adsorption of trypsin onto poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres and its enzymatic activity

Poly(2-hydroxyethyl methacrylate)/polystyrene (PHEMA/PS) composite microspheres were produced by emulsifier-free seeded emulsion polymerization for styrene in the presence of PHEMA seed particles. Effects of the surface characteristics of the PHEMA/PS composite microspheres on the adsorption immobilization of trypsin and on its enzymatic activity were discussed. Above 5 mol% of HEMA content, trypsin molecules adsorbed had high activity, 65–100% of the activity of free trypsin. The excellence of the composite microspheres as a carrier for trypsin seems to be closely related with the surface heterogeneity consisting of both hydrophilic and hydrophobic parts.