Optimization of Selective Epitaxial Growth of Silicon in LPCVD

Selective epitaxial growth (SEG) of silicon has attracted considerable attention for its good electrical properties and advantages in building microstructures in high‐density devices. However, SEG problems, such as an unclear process window, selectivity loss, and nonuniformity have often made application difficult. In our study, we derived processing diagrams for SEG from thermodynamics on gas‐phase reactions so that we could predict the SEG process zone for low pressure chemical vapor deposition. In addition, with the help of both the concept of the effective supersaturation ratio and three kinds of E‐beam patterns, we evaluated and controlled selectivity loss and nonuniformity in SEG, which is affected by the loading effect. To optimize the SEG process, we propose two practical methods: One deals with cleaning the wafer, and the other involves inserting dummy active patterns into the wide insulator to prevent the silicon from nucleating.     

A New Approach for Built‐in Self‐Test of 4.5 to 5.5 GHz Low‐Noise Amplifiers

This paper presents a low‐cost RF parameter estimation technique using a new RF built‐in self‐test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using 0.18 μm SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Simultaneous degradation of nitroaromatic compounds TNT,RDX, atrazine,and simazine by Pseudomonas putida HK‐6 in bench‐scale bioreactors

BACKGROUND: Environmental contamination by nitroaromatic compounds such as 2,4,6‐trinitrotoluene (TNT), hexahydro‐1,3,5‐trinitro‐1,3,5‐s‐triazine (RDX), atrazine, and/or simazine (TRAS) generated as waste from military and agricultural activities is a serious worldwide problem. Microbiological treatment of these compounds is an attractive method because many explosives and herbicides are biodegradable and the process can be made cost‐effective. We explored the feasibility of using cultures of Pseudomonas putida HK‐6 for simultaneous degradation of TRAS with the aim of microbial application in wastewater treatment in bench‐scale bioreactors. RESULTS: Experiments were conducted to study the effects of supplemental carbons, nitrogens, and Tween‐80 on the degradation of Ps. putida HK‐6 in media containing TRAS as target substrate(s). The most effective TRAS degradation was shown in the presence of molasses. Addition of nitrogen sources produced a delayed effect for the target substrate(s). Tween‐80 enhanced the degradation of target substrate(s). Simultaneous degradation of these compounds proceeded to completion within the given period. CONCLUSIONS: Ps. putida HK‐6 was capable of growth with TRAS, and the effects of supplements on TRAS degradation and simultaneous TRAS degradation were evaluated in bench‐scale bioreactors. The results of this study have practical applications in the processes of industrial waste stream treatment where the disposal of TRAS may be problematic. Copyright © 2008 Society of Chemical Industry     

Bias-temperature instabilities of polysilicon gate HfO/sub 2/ MOSFETs

Bias-temperature instabilities (BTI) of HfO/sub 2/ metal oxide semiconductor field effect transistors (MOSFETs) have been systematically studied for the first time. NMOS positive BTI (PBTI) exhibited a more significant V/sub t/ instability than that of PMOS negative BTI (NBTI), and limited the lifetime of HfO/sub 2/ MOSFETs. Although high-temperature forming gas annealing (HT-FGA) improved the interface quality by passivating the interfacial states with hydrogen, BTI behaviors were not strongly affected by the technique. Charge pumping measurements were extensively used to investigate the nature of the BTI degradation, and it was found that V/sub t/ degradation of NMOS PBTI was primarily caused by charge trapping in bulk HfO/sub 2/ rather than interfacial degradation. Deuterium (D/sub 2/) annealing was found to be an excellent technique to improve BTI immunity as well as to enhance the mobility of HfO/sub 2/ MOSFETs.     

Lead differentially modifies cytokine production in vitro and in vivo

An imbalance between helper T cell type 1 (Th1) and helper T cell type 2 (Th2) activation can result in immunodysregulations leading to impaired cell-mediated immunity with an increased incidence of infectious disease or cancer and/or aberrant humoral immunity that may culminate with an autoimmune disease. Mercury, a heavy-metal toxicant, is known to induce renal autoimmunity characterized by a predominant Th2 response. Lead, another metal toxicant, causes enhanced B cell activities and impairs host resistance to several bacterial and viral infections. In addition, Pb was reported to enhance Th2 proliferation and inhibit Th1 proliferation. The differential effects of Pb on Th subset activation have been further investigated. In vitro IL-4 production by a Th2 clone was significantly increased by the addition of PbCl2, whereas IFN gamma production by a Th1 clone was decreased by the addition of PbCl2. When BALB/c mice were subcutaneously exposed to PbCl2, ex vivo Il-4 production by anti-CD3-stimulated splenic T cells was enhanced, but IFN gamma production was inhibited. Additionally, the plasma IL-4 and IgE levels of Pb-exposed mice were increased, and the plasma IFN gamma levels were significantly lowered in the absence of any additional exogenous antigen. In vitro, ex vivo, and in vivo treatment with HgCl2 produced similar findings. This study is the first report of the preferential activation of a Th2 response by Pb in vivo and suggests that PB, like Hg, may induce autoimmune responses by upsetting the balance between Th1- and Th2-like cells, which could enhance production of antibodies to self antigens.     

Recent advances in theory and applications of scrambling techniquesfor lightwave transmission

This paper discusses recent advances in the theory and applications of scrambling techniques for digital lightwave transmission. It introduces the theories of sequence space and shift register generator (SRG) space which enable systematic analysis and mathematical manipulation of the behavior of sequences in general and the related SRG's. It discusses the behavior and realization of frame synchronous scrambling (FSS) and distributed sample scrambling (DSS) with emphasis on parallel sequences and the related parallel SRG's (PSRG). In addition, it describes self synchronous scrambling (SSS). Then the paper applies the theories to today's lightwave transmission systems by demonstrating practical parallel designs of FSS for SDH/SONET transmission, DSS for cell-based ATM transmission, and SSS for SDH-based ATM transmission. It finally considers how DSS can be used for scrambling of mixed isochronous and nonisochronous data in future high-speed data networks. The paper employs various new concepts and terminology, such as PSRG engine, generating vector discrimination matrix, (M,N) PSRG, sampling vector, correction vector, correction matrix, predictable scrambling concurrent sampling, and immediate correction