Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

Photoinduced Formation of Small Gold Particles in Silica Gels

AuCl⁻₄ ions in sol-gel-derived silica gels (Au/silica gels) were photoreduced by ultraviolet light irradiation at room temperature. In the presence of ethylene glycol in the silica gels, small Au particles were effectively formed by the irradiation. When the storage temperature of the gels was increased in the dark after the irradiation, the surface plas-mon resonance absorption peak of the Au particles was shifted to longer wavelengths, indicating that the Au particles became large. At a storage temperature below 9°C, Au particles could not be observed in the silica gels. The apparent activation energy of Au particle formation was estimated to be 17. 3 kcal·tmol⁻¹.     

Stability analysis of continuous-time periodic systems via theharmonic analysis

Asymptotic stability of finite-dimensional linear continuous-time periodic (FDLCP) systems is studied by harmonic analysis. It is first shown that stability can be examined with what we call the harmonic Lyapunov equation. Another necessary and sufficient stability criterion is developed via this generalized Lyapunov equation, which reduces the stability test into that of an approximate FDLCP model whose transition matrix can be determined explicitly. By extending the Gerschgorin theorem to linear operators on the linear space l₂, yet another disc-group criterion is derived, which is only sufficient. Stability of the lossy Mathieu equation is analyzed as a numerical example to illustrate the results     

2D Image Construction from Low Resolution Response of a New Non‐invasive Measurement for Medical Application

This paper presents an application of digital signal processing to data acquired by the radio imaging method (RIM) that was adopted to measure moisture distribution inside the human body. RIM was originally developed for the mining industry; we are applying the method to a biomedical measurement because of its simplicity, economy, and safety. When a two‐dimensional image was constructed from the measured data, the method provided insufficient resolution because the wavelength of the measurement medium, a weak electromagnetic wave in a VHF band, was longer than human tissues. We built and measured a phantom, a model simulating the human body, consisting of two water tanks representing large internal organs. A digital equalizer was applied to the measured values as a weight function, and images were reconstructed that corresponded to the original shape of the two water tanks. As a result, a two‐dimensional image containing two individual peaks corresponding to the original two small water tanks was constructed. The result suggests the method was applicable to biomedical measurement by the assistance of digital signal processing. This technique may be applicable to home‐based medical care and other situations in which safety, simplicity, and economy are important.     

Formation of uniform GaAs multi-atomic steps with 20–30 nm periodicity and related structures on vicinal (111)B planes by MBE

We studied morphology of GaAs surfaces and the transport properties of two-dimensional electron gas (2DEG) on vicinal (111)B planes. Multi-atomic steps (MASs) are found on the vicinal (111)B facet grown by molecular beam epitaxy, which will affect electron transport on the facet. We also studied how the morphology of GaAs epilayers on vicinal (111)B substrates depends on growth conditions, especially on the As₄ flux. The uniformity of MASs on the substrates have been improved and smooth surfaces were obtained when the GaAs was grown with high As₄ flux, providing step periodicity of 20 nm. The channel resistance of the 2DEG perpendicular to the MASs is reduced drastically with this smooth morphology. These findings are valuable not only for fabricating quantum devices on the (111)B facets but also those on the vicinal (111)B substrates.     

Mechanical stress control in a VLSI-fabrication process: a method for obtaining the relation between stress levels and stress-induced failures

An ideal fabrication process is designed to minimize mechanical stress in semiconductor devices and to improve device reliability. Mechanical stress levels were predicted by in-house simulations supported by a thin-film database. These stress levels were correlated with stress-induced defects by TEM analysis supported by fail bit addressing on matured megabit SRAMs. Amorphous-doped silicon film with various annealing temperatures were used for the gate electrode to change the mechanical stress in devices and to get the direct relationship between predicted stress levels and stress related defects. The authors describe brief guidelines for suppressing dislocations in the small geometry shallow-trench isolation process utilizing this system. Polysilicon thickness in the W-polycide gate electrode is designed to minimize mechanical stress in the gate oxide and to suppress the gate oxide failure in probe and class tests. Moreover, critical stress generates dislocations during post source/drain ion implantation anneal obtained by a ball indentation method. This indicated that lower temperature anneal is effective in suppressing the dislocations. A two-step anneal was introduced to suppress dislocations and to enable higher ion activation.     

Evidence that angiotensin II, endothelins and nitric oxide regulate mitogen-activated protein kinase activity in rat aorta

We measured the activity of mitogen-activated protein (MAP) kinases, enzymes believed to be involved in the pathway for cell proliferation, in rat aortic strips with or without endothelium, and examined effects of angiotensin receptor antagonists, endothelin receptor antagonists and nitric oxide (NO)-related agents. Endothelium removal produced an activation of MAP kinase activity in the strips, whereas the enzyme activity was not affected in the adventitia. The MAP kinase activation was inhibited by either the angiotensin AT1 receptor antagonist losartan or the endothelin ETA receptor antagonist BQ 123. The combination of both antagonists caused an additive inhibition. The angiotensin AT2 receptor antagonist PD 123,319 and the endothelin ETB receptor antagonist BQ 788 did not affect the MAP kinase activation. The NO synthase inhibitor NG-nitro-L-arginine methyl ester (L-NAME) caused an activation of MAP kinase in the endothelium-intact aorta and the MAP kinase activation was inhibited by losartan or BQ123. The NO releaser nitroprusside inhibited the MAP kinase activation induced by endothelium removal or angiotensin II. These results suggest that even in isolated arteries, NO of endothelial origin tonically exert MAP kinase-inhibiting effects and endogenous angiotensin II and endothelins in the media are tonically released to cause MAP kinase-stimulating effects in medial smooth muscle.