Inactivation of Fusarium oxysporum Conidia in Soil with Gaseous Ozone – Preliminary Studies

ABSTRACT

In this study, the efficiency of gaseous ozone (O₃) injected in the soil as an oxidizing agent for the inactivation of F. oxysporum was evaluated under laboratory conditions. The results show the treatment reached an inactivation efficiency of 76% after an applied dose of 0.40 g O₃ kg ^?1 soil. This shows that the injection of O₃ can be a viable alternative to control pathogenic organisms in the soils. Nevertheless, it is clear that more studies on determining the effects of this treatment on soil quality are needed.     

Towards Increased Understanding of Open Data Use for Software Development

Information Systems Frontiers - The way open data resources of varied type and volume are used by software applications remains only partly known. In this study, following CRoss-Industry Standard...     

Path Loss Modelling for Location Service Applications

The aim of this paper is the path loss modelling for the radiolocation services in radio communication networks, particularly in cellular networks. The main results of the measurements obtained in the physical layer of the UMTS are introduced. A new method for the utilization of the multipath propagation phenomenon to improve the estimation of the distance between the MS （mobile station） and the BS （base station） is outlined. This method significantly increases the quality of location services in systems which use a radio interface with DS （direct sequence） CDMA （code division multiple access）.     

Temperatures in linguistics as a model of thermodynamics

Natural languages have been taken as models of systems with strong statistical correlations. In such systems the usual probabilistic limiting laws (Gauss etc.) are no more valid and the concept of higher order temperatures can be applied. It has been shown that this is the case in such languages as English, German, French, Russian and Japanese, for letter and word statistics. The corresponding temperatures (up to the 5-th order), entropies and statistical moments have been calculated and their mutual relations have been checked.... erst wenn du plötzlich Fänger wirst des Balles, den eine ewige Mitspielerin dir zuwarf, ... erst dann ist Fangen-können ein Vermögen, nicht deines, einer Welt.(... only when you suddenly catch the ball which the eternal fellow player throws to you,... only then the catching ability is an accomplishment, not of you, but of the world.)R. M. Rilke (from the motto of [3])Supported by Committee of Scientific Research, Warsaw (KBN), Project Nr. 20412 91 01.     

Bending impact on the performance of a flexible Li4Ti5O12-based all-solid-state thin-film battery

The growing demand of flexible electronic devices is increasing the requirements of their power sources. The effect of bending in thin-film batteries is still not well understood. Here, we successfully developed a high active area flexible all-solid-state battery as a model system that consists of thin-film layers of Li₄Ti₅O₁₂, LiPON, and Lithium deposited on a novel flexible ceramic substrate. A systematic study on the bending state and performance of the battery is presented. The battery withstands bending radii of at least 14 mm achieving 70% of the theoretical capacity. Here, we reveal that convex bending has a positive effect on battery capacity showing an average increase of 5.5%, whereas concave bending decreases the capacity by 4% in contrast with recent studies. We show that the change in capacity upon bending may well be associated to the Li-ion diffusion kinetic change through the electrode when different external forces are applied. Finally, an encapsulation scheme is presented allowing sufficient bending of the device and operation for at least 500 cycles in air. The results are meant to improve the understanding of the phenomena present in thin-film batteries while undergoing bending rather than showing improvements in battery performance and lifetime.     

Miniaturized ceramic differential scanning calorimeter with integrated oven and crucible in LTCC technology

A miniaturized ceramic differential scanning calorimeter (MC-DSC) with integrated oven and crucible is presented. Despite its small size of only 11 mm × 39 mm × 1.5 mm, all functions of a conventional DSC apparatus are integrated in this novel device - including the oven. The MC-DSC is fully manufactured in thick-film and green glass ceramic tape-based low temperature co-fired ceramics (LTCC) technology. Therefore, production costs are considered to be low. Initial results using indium as a sample material show a good dynamic performance of the MC-DSC. Full width at half maximum of the melting peak is 2.4 °C (sample mass approx. 11 mg, heating rate approx. 50 °C/min). Repeatability of the indium melting point is within ±0.02 °C. The melting peak area increases linearly with the sample mass up to at least 26 mg. Simulations of a strongly simplified finite element model of the MC-DSC are in a good agreement with measurement results allowing a model-based prediction of its basic characteristics.     

Stability properties of a higher order scheme for a GKdV-4 equation modelling surface water waves

This work is devoted to the study of a higher order numerical scheme for the critical generalized Korteweg-de Vries equation (GKdV with p=4) in a bounded domain. The KdV equation and some of its generalizations as the GKdV type equations appear in Physics, for example in the study of waves on shallow water. Based on the analysis of stability of the first order scheme introduced by Pazoto et al. (Numer. Math. 116:317–356, 2010), we add a vanishing numerical viscosity term to a semi-discrete scheme so as to preserve similar properties of stability, and thus able to prove the convergence in L ⁴-strong. The semi-discretization of the spatial structure via central finite difference method yields a stiff system of ODE. Hence, for the temporal discretization, we resort to the two-stage implicit Runge-Kutta scheme of the Gauss-Legendre type. The resulting system is unconditionally stable and possesses favorable nonlinear properties. On the other hand, despite the formation of blow up for the critical case of GKdV, it is known that a localized damping term added to the GKdV-4 equation leads to the exponential decay of the energy for small enough initial conditions, which is interesting from the standpoint of the Control Theory. Then, combining the result of convergence in L ⁴-strong with discrete multipliers and a contradiction argument, we show that the presence of the vanishing numerical viscosity term allows the uniform (with respect to the mesh size) exponential decay of the total energy associated to the semi-discrete scheme of higher-order in space with the localized damping term. Numerical experiments are provided to illustrate the performance of the method and to confirm the theoretical results.     

MDO: assessment and direction for advancement—an opinion of one international group

This paper is a summary of topics presented and discussed at the 2006 European–U.S. Multidisciplinary Optimization (MDO) Colloquium in Goettingen, Germany, attended by nearly seventy professionals from academia, industry, and government. An attempt is made to accurately reflect the issues discussed by this diverse group, qualified by interest, experience, and accomplishment to present an opinion about the state-of-the-art, trends, and developments in Multidisciplinary Design Optimization. As such, its main purpose is to provide suggestions and stimulus for future research in the field. The predominant content of the colloquium was centered on aerospace, with a few contributions from the automotive industry, and this is reflected in the article. Due to the timeframe that has passed since the conclusion of the workshop, the authors have updated topics where appropriate to reflect observed developments over the past 3 years. Finally, rather than dwelling extensively on past accomplishments and current capabilities in MDO we focus on the needs and identified shortcomings from the colloquium which lead to potential future research directions. A brief MDO background is provided to set the discussion in its proper context.     

Physical Reasoning to Synchronize Electrical Signals and Related Diagnostics in Plasma Focus Devices

Plasma Focus (PF) devices as well as other similar pulsed discharge devices requires a variety of diagnostics for their proper control and optimization, including the voltage between electrodes, the time derivative of the discharge current, detection of X-rays and neutron emissions, and pulsed laser images (Shadow, Schlieren, interferograms). This article discusses the problem of the time reference of all these outputs and proposes specific techniques for synchronizing them based on sound physical grounds. The foundations of synchronization criterion are verified in several experiments on PF devices.