Facile Deposition of Silver Nanoparticles on Photonic Cellulose Nanocrystals Films: A Study on Solvent Stability and Post Antibacterial Activity

Cellulose nanocrystals (CNCs) incorporated with silver nanoparticles (AgNPs) photonic films have drawn considerable attention due to their plasmonic chiroptical activity. However, the exploitation of some fundamental properties for practical use such as the affinity analysis of metal nanoparticles attached to the surface of photonic films according to the solvent compatibility and antibacterial activity under physical conditions has yet not been studied. Hence, a facile process of in situ deposition of AgNPs into the chiral structure of CNC films is proposed. CNC photonic films, cross-linked by glutaraldehyde are prepared. This interaction generated the solvents-stable photonic film with a considerable amount of unreacted aldehyde functional groups that facilitates the reduction of Ag salt to AgNPs. The formed AgNPs in the photonic films show excellent stability over immersion in various polar and non-polar solvents. The post-solvent treated photonic films display excellent contact-based antibacterial behavior against gram-negative Escherichia coli.     

Influence of mixing cycle on the degree of mixing of calcite‐filled polyethylene upon stretching

The mixing cycle‐dependent degree of dispersion and degree of mixing of a calcite (calcium carbonate) agglomerate in high‐density polyethylene (HDPE), low‐density polyethylene (LDPE), and linear low‐density polyethylene (LLDPE) matrices upon stretching was investigated using three different techniques: mechanical property, morphological behavior, and image analyzer analyses. The mechanical properties analyzed in terms of the tensile strength and maximum elongation resulted in that the second mixing was the best for giving a better property for all systems except the LDPE system, which exhibited no significant difference between the second and third mixings. The morphological behavior of the three compounds were different, but no distinctive difference was observed to differentiate the degree of mixing from system to system. The number‐, weight‐, and z + 1‐average diameters of the air hole and the aspect ratio upon the stretching and mixing cycle were calculated to analyze the degree of mixing of the calcite‐filled composites. As a consequence, no difference in the average diameter of the air hole was obtained among the three systems, but the aspect ratios of the air hole varied significantly. Thus, the degree of dispersion and the degree of mixing may be influenced by the average calcite agglomerate size, the average diameter of the air hole, and the aspect ratio upon stretching and mixing cycles. Those factors would be formed by the difference in chemical characteristics upon various microstructures of polyethylene and its molecular weight and molecular weight distribution. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 311–321, 2003     

A near-optimal database allocation for reducing the average waiting time in the grid computing environment

In a grid computing environment, a great many users may access the same database simultaneously. To reduce the average waiting time for all users, a grid designer usually replicates the frequently accessed database among nodes based on the load balance heuristic. On the other hand, users may raise identical queries regarding an issue of interest, e.g., stock information, on a database and each of the queries will be directed to any node having a replica of that database. That is, the same answer will be determined by multiple nodes. Consequently, there exist two shortcomings of poor data sharing and duplicate calculations if the database is not replicated and allocated adequately. In this paper, we aim to minimize average waiting time and try to overcome the two shortcomings by performing database allocation over multiple nodes without any replication. The main idea behind the proposed method is to map the original problem to the Euclidean space Rⁿ and to solve the mapped problem in Rⁿ by a gradient-based optimization technique. The theoretical analyses ensure that the proposed method can converge linearly and achieve near-optimal results.     

Kinetic model for the simulation of hen egg white lysozyme adsorption at solid/water interface

A simulation model for adsorption kinetics of hen egg white lysozyme (HEW) adsorption to hydrophilic silica is proposed. The adsorption kinetic data were monitored by usingin-situ ellipsometry. The model is based on an irreversible adsorption mechanism allowing two different adsorbed states. The adsorbed states were differentiated based on binding strengths resistant to the concentration gradient exerted by rinse. Molecules desorbing and remaining upon rinse were identified as loosely bound (state 1) and tightly bound (state 2) states, respectively. The adsorption rate constants were assumed to be a time-dependent nonlinear function in order to account for the change in surface properties originating from the protein layer formed on the surface. The parameters of adsorption rate constants were evaluated by using adsorption kinetic data at different protein concentrations, and the relationships between the adsorption parameters and protein concentration were established which eventually demonstrated a linear relationship. The established relations between the adsorption parameters and concentration elucidated the effect of protein concentration on adsorption to hydrophilic silica.     

Error Concealment Using Inter‐layer Correlation for Scalable Video Coding

In this paper, we propose a new error concealment (EC) method using inter‐layer correlation for scalable video coding. In the proposed method, the auxiliary motion vector (MV) and the auxiliary mode number (MN) of intra prediction are interleaved into the bitstream to recover the corrupted frame. In order to reduce the bit rate, the proposed method encodes the difference between the original and the predicted values of the MV and MN instead of the original values. Experimental results show that the proposed EC outperforms the conventional EC by 2.8 dB to 6.7 dB.     

Stretchable,Transparent Zinc Oxide Thin Film Transistors

Stretchable and transparent thin film transistors (TFTs) with intrisically brittle oxide semiconductors are built using a wavy structural configuration that can provide high flexibility and stretchability. After device fabrication procedures including high temperature annealing, the oxide semiconductor‐based TFT arrays can be transferred directly to plastic or rubber substrates, without an additional device process, using transfer printing methods. This procedure can avoid some of the thermal degradation problems associated with plastic or rubber substrates by separating them from the annealing procedure needed to improve the device performance. These design and fabrication methods offer the possibility of developing a new format of stretchable electronics.     

Rheological investigations of suspensions of talc,calcium carbonate,and their mixtures in a polystyrene melt

An experimental study of the rheological properties of talc, calcite, and mixed particle compounds of polystyrene (PS) compounds has been carried out on a range of instruments at 200°C. We investigated the shear viscosity over a very wide range of shear rates in capillary, cone-plate, and sandwich rheometers. Shear stresses below which there is no flow, i.e. yield stresses, were found. A uniaxial elongational rheometer based on floating samples on a silicone oil bath was used to study the uniaxial extensional flow characteristics. The compounds were found to absorb silicone oil. It was, however, possible to estimate yield values of highly filled compounds in uniaxial extension by investigating the stretching of vertical filaments in a chamber filled with nitrogen.