A noncontact NDE method using a laser generated focused-Lamb wave with enhanced defect-detection ability and spatial resolution

The laser generation method of a focused Lamb wave is expected to have high defect-detection abilities and spatial resolution, with the added advantage of noncontact testing. In this method, the laser beam is illuminated on the surface of an object through an arrayed arc slit. The energy of the generated Lamb wave is then concentrated at a focus of an arc. This focusing effect improves the NDE (nondestructive evaluation) performance, which is dependent on the geometries of an arrayed arc slit. In this paper, the relationships between the parameters determining the slit geometry and the focusing effect of the generated Lamb wave was investigated using a parametric study, and appropriate values of the parameters were obtained to maximize the focusing ability. In order to validate the performance of this method, an NDE system was constructed and experiments were performed to detect through-hole defects in a plate. The results showed that the proposed system could clearly detect defects as small as 0.3 mm in diameter, while the conventional line array method failed to detect defects smaller than 1 mm in diameter. Moreover, this method showed possible detection of defects much smaller than 0.3 mm, and great improvements in the spatial resolution as compared with the line array method.     

Evaluation of fracture toughness degradation of CrMoV rotor steels based on ultrasonic nonlinearity measurements

The objective of this paper is to develop a nondestructive method for estimating the fracture toughness (K _IC) of CrMoV steels used as the rotor material of steam turbines in power plants. To achieve this objective, a number of CrMoV steel samples were heat-treated, and the fracture appearance transition temperature (FATT) was determined as a function of aging time. Nonlinear ultrasonics was employed as the theoretical basis to explain the harmonic generation in a damaged material, and the nonlinearity parameter of the second harmonic wave was the experimental measure used to be correlated to the fracture toughness of the rotor steel. The nondestructive procedure for estimating theK _IC consists of two steps. First, the correlations between the nonlinearity parameter and the FATT are sought. The FATT values are then used to estimateK _IC, using theK _IC versus excess temperature (i.e.,T-FATT) correlation that is available in the literature for CrMoV rotor steel.     

Renal Protective Effects of Low Molecular Weight of Inonotus obliquus Polysaccharide (LIOP) on HFD/STZ-Induced Nephropathy in Mice

Diabetic nephropathy (DN) is the leading cause of end-stage renal disease in diabetes mellitus. Oxidative stress, insulin resistance and pro-inflammatory cytokines have been shown to play an important role in pathogeneses of renal damage on type 2 diabetes mellitus (DM). Inonotus obliquus (IO) is a white rot fungus that belongs to the family Hymenochaetaceae; it has been used as an edible mushroom and exhibits many biological activities including anti-tumor, anti-oxidant, anti-inflammatory and anti-hyperglycemic properties. Especially the water-soluble Inonotus obliquus polysaccharides (IOPs) have been previously reported to significantly inhibit LPS-induced inflammatory cytokines in mice and protect from streptozotocin (STZ)-induced diabetic rats. In order to identify the nephroprotective effects of low molecular weight of IOP fraction (LIOP), from the fruiting bodies of Inonotus obliquus, high-fat diet (HFD) plus STZ-induced type 2-like diabetic nephropathy C57BL/6 mice were investigated in this study. Our data showed that eight weeks of administration of 10–100 kDa, LIOP (300 mg/kg) had progressively increased their sensitivity to glucose (less insulin tolerance), reduced triglyceride levels, elevated the HDL/LDL ratio and decreased urinary albumin/creatinine ratio(ACR) compared to the control group. By pathological and immunohistochemical examinations, it was indicated that LIOP can restore the integrity of the glomerular capsules and increase the numbers of glomerular mesangial cells, associated with decreased expression of TGF-β on renal cortex in mice. Consistently, three days of LIOP (100 μg/mL) incubation also provided protection against STZ + AGEs-induced glucotoxicity in renal tubular cells (LLC-PK1), while the levels of NF-κB and TGF-β expression significantly decreased in a dose-dependent manner. Our findings demonstrate that LIOP treatment could ameliorate glucolipotoxicity-induced renal fibrosis, possibly partly via the inhibition of NF-κB/TGF-β1 signaling pathway in diabetic nephropathy mice.     

The optimal used period of repairable product with leadtime after the warranty expiry

This paper considers the two-phase warranty models for repairable products. It defines the time-interval [0,?W] as the first phase (warranty period) and the time interval (W,?T?+?W) as the second phase (buyer survival period). The products have two types of failures: type I failures (minor failures) and type II failures (catastrophic failures). In the model, type I failures are also removed by minimal repairs in the first and the second phases, and type II failures are removed by replacements in the first phase. If type II failures take place in the second phase, then it is supposed the life of products will be ended. To buy a new product is conducted at time T+W or upon the type II failure. Whenever each replacement takes place, the spare unit is ordered and then delivered. Therefore, the lead-time is considered. This thesis considers three warranty and maintenance models for seller, buyer and the society. The objective is to obtain the optimal T?*. Finally, a numerical example is provided.     

A generalized age replacement policy with random delivery time and inspection

This paper is concerned with an age replacement policy that is more general because spare part random delivery time, age-dependent minimal repair and inspection are considered. Introducing the cost due to ordering, repairs, shortage, holding and inspection, we derive the expected cost per unit time in the long run as a criterion of optimality and seek the optimum age replacement policy by minimizing that cost. Various special cases are discussed and a numerical example is finally given to illustrate the method.     

Cooperative and Opportunistic Channel Access for Vehicle to Roadside (V2R) Communications

This paper focuses on vehicle to roadside (V2R) communications in vehicular networks based on the IEEE 802.11 DCF MAC protocol. In vehicular networks, roadside units (RSUs) are typically spaced apart along the road and each vehicle can be connected to an RSU only when the vehicle is within its transmission range. Due to the high relative speed between a moving vehicle and a stationary RSU, the residence time of the vehicle within the coverage of each RSU is very short. Thus it is hard for the system to reach a steady state. With multi-hop forwarding, in which a vehicle may be connected to an RSU through relaying over other vehicles, the connection time of each V2R access may be extended. But this is at the expense of introducing wireless interference among vehicles, which may dramatically degrade the system performance. To tackle these challenges, we propose a new mechanism called Proxy-based Vehicle to RSU access (PVR) for V2R communications. This protocol is designed to exploit cooperative and opportunistic forwarding between any two distant RSUs and to emulate back-to-back transmissions within the coverage of an RSU. As a result, it can shorten the access delay by taking advantage of opportunistic forwarding and mitigate the interference problem during the short residence time within the coverage of an RSU. The simulation results show that PVR achieves excellent performance and outperforms all existing solutions for V2R communications in vehicular networks.     

Midwall fractional shortening is an independent predictor of left ventricular diastolic dysfunction in asymptomatic patients with systemic hypertension

Conventional measures of left ventricular (LV) systolic performance suggest that diastolic dysfunction precedes the development of systolic dysfunction in hypertension. Midwall fractional shortening is a new measure of systolic function that identifies hypertensive patients who have evidence of target-organ damage, impaired contractile reserve, and increased mortality. We therefore sought to determine whether depressed midwall fiber shortening is associated with abnormal diastolic function. Echocardiograms were obtained in 102 otherwise healthy hypertensive patients without treatment with normal conventional measures of systolic function. Of these, 15 had depressed midwall shortening based on previously described normative relations. Patients with depressed midwall shortening had slightly higher blood pressure. Abnormal diastolic function, defined as late (A) LV inflow velocity greater than early (E) velocity, was observed in 33% of those with normal midwall shortening but in 60% of those with depressed shortening (p <0.05). Patients with A/E >1 had lower absolute midwall fiber shortening (15 +/- 3% vs 18 +/- 3%, p <0.0001) but similar endocardial shortening. Patients with abnormal midwall shortening had higher A/E and longer isovolumic relaxation times (both p <0.05). In multivariate analysis, midwall fractional shortening, age, and heart rate were independent predictors (p <0.01) of A/E in a model including blood pressure, LV mass, and endocardial shortening. We conclude that subnormal midwall shortening predicts LV diastolic abnormalities in this population of hypertensive patients with otherwise normal measures of LV systolic function. Contrary to our previous understanding, depressed LV systolic performance, when identified with this newer method, occurs coincidentally with impaired diastolic function.     

Tracer of complex movement by using five optical line detectors and fifth-order cross-correlation analysis

A new method to detect the trace of complex movement of vehicle by using five optical line detectors and fifth-order cross-correlation analysis is proposed. In this method, the curvature and center coordinates of trace segment can be estimated simultaneously together with the velocity of the vehicle's motion. Hence the trace of the vehicle in a fixed measuring time interval can be detected as a circular are and the whole trace is reconstructed as the connection of these arcs. To confirm the usefulness of the proposed method, an actual measurement system has been constructed and experiments using the sham road of which movement was controlled have been carried out. The details of the principle, system construction and the results are shown.     

Numerical study on thermal stress cutting of silicon wafers using two-line laser beams

We propose a method of cleaving silicon wafers using two-line laser beams. The base principle is separating the silicon wafer using crack propagation caused by laser-induced thermal stress. Specifically, this method uses two-line laser beams parallel to the cutting line such that the movements of the laser beam along the cutting line can be omitted, which is necessary when using a point beam. To demonstrate the proposed method, 3D numerical analysis of a heat transfer and thermo-elasticity model was performed. Crack propagation was evaluated by comparing the stress intensity factor (SIF) at the crack tip with the fracture toughness of silicon, where crack propagation is assumed begin when the SIF exceeds the fracture toughness. The influences of laser power, line beam width, and distance between two laser beams were also investigated. The simulation results showed that the proposed method is appropriate for cleaving silicon wafers without any thermal damage.

     

Genipin-crosslinking polyvinyl alcohol hollow braids degradable tissue engineering scaffolds: Manufacturing techniques and property evaluations

Tissue engineering has been developed with the aim of improving the regeneration and recovery of impaired tissues and organs. Biodegraded scaffolds serve the aforementioned functions and can also be decomposed by means of metabolism. They have no biological toxicity and save patients from injuries by the second surgery, which makes biodegradable scaffolds a new development trend in the tissue engineering. In this study, the textile engineering and chemical crosslinking techniques are employed to produce biodegradable polyvinyl alcohol (PVA) hollow braids, serving as the tissue engineering scaffolds. The process involves two types of products, including the twisted yarns and hollow braids. The twist number of PVA twisted yarns is changed to form different PVA twisted yarns, which are then used to braided into hollow braids via the braiding technology. Therefore, the hollow braids are basically composed three types of PVA twisted yarns. Next, the surface observation, mechanical properties, and degradation of the products are then evaluated. The test results indicate that PVA twisted yarns exhibit the optimal mechanical properties when being twisted with 3 turns/inch. Any higher twist counts result in over twist in the twisted yarns. The optimal hollow braids are composed of PVA twisted yarns with a twist counts being 3 turns/inch. Afterwards, hollow braids are crosslinking with genipin, thereby obtaining greater mechanical strength of 23.6 N and higher decomposition rate of 0.8. The specified hollow braids are suitable for the use as tissue engineering scaffolds.