论直流电动机换向火花的检测与调整

本文着重探讨直流电动机换向火花的形成、征状以及使用的一些对其进行判别、调整的简单方法，并阐述其原理及效果。     

实现多无线接入点网络连接模型的研究

本文提出一种负载均衡模型,此模型不仅考虑AP的信号强度,而且要考虑现有AP已接入无线工作站的数量还有连接质量因素。除此之外,还讨论了实现此模型的无线协议的扩充。     

Synthesis and characterization of caprolactone based polyurethane with degradable and antifouling performance

In this work,a degradable polyurethane composed of caprolactone(CL)and L-Lactide(LLA)as soft seg-ments,and 4,4'-methylenebis(cyclohexyl isocyanate)(H12MDI)and polytetramethylene ether glycol(PTMEG)as hard segments,was prepared.Hydrolytic degradation experiment revealed that the degrad-able polyurethane(PU)could be degraded in artificial seawater.It also showed that caprolactone-co-polyurethane(CL-PU)copolymer with higher crystallinity degraded much slower in artificial seawater.However,the introduction of LLA resulted in an increase in the hydrophilicity and reduction in the crys-tallinity of degradable PU,as demonstrated by the contact angle analysis.The result of the scanning elec-tron microscope showed that the surface of degradable PU renewed under static condition.Moreover,degradable PU was able to be used as a carrier,and it controlled the release rate of 4,5-dichloro-2-octyl-isothiazolone(DCOIT).The anti-diatom(Navicula incerta)test demonstrated that the(caprolactone-co-L-lactide)-co-polyurethane 4(CL/LAx-PU4)with DCOIT contents prevented the adhe-sion of diatom Navicula incerta(88.37％reduction)due to their self-polishing and the release of antifou-lants.Therefore,the degradable PU consisted of CL,LLA,and DCOIT could be a durable resin with good antifouling activity for the application in the marine anti-biofouling field.     

An alignment-free fingerprint bio-cryptosystem based on modified Voronoi neighbor structures

Bio-cryptography is an emerging security technology which combines cryptography with biometrics. A good bio-cryptosystem is required to protect the privacy of the relevant biometric data as well as achieving high recognition accuracy. Fingerprints have been widely used in bio-cryptosystem design. However, fingerprint uncertainty caused by distortion and rotation during the image capturing process makes it difficult to achieve a high recognition rate in most bio-cryptographic systems. Moreover, most existing bio-cryptosystems rely on the accurate detection of singular points for fingerprint image pre-alignment, which is very hard to achieve, and the image rotation transformation during the alignment process can cause significant singular point deviation and minutiae changes. In this paper, by taking full advantage of local Voronoi neighbor structures (VNSs), e.g. local structural stability and distortion insensitivity, we propose an alignment-free bio-cryptosystem based on fixed-length bit-string representations extracted from modified VNSs, which are rotation- and translation-invariant and distortion robust. The proposed alignment-free bio-cryptosystem is able to provide strong security while achieving good recognition performance. Experimental results in comparison with most existing alignment-free bio-cryptosystems using the publicly-available databases show the validity of the proposed scheme.     

19.6μm微管内部阻力特征

分别以蒸馏水、四氯化碳为工质,流过内径19.6 μm光滑石英管,分别采用"单管法"和"双管法"测量微管进出口压力、温度和流量,实验得到了雷诺数(Re数)在9.6～530之间的微管内部流动阻力,并与经典理论值进行了对比.实验研究结果表明,粘性耗散效应降低了摩擦系数,降低了约13.7%;进出口压力降、入口效应与双电层效应(electrical double layer,EDL效应)则增加微管内部摩擦系数,在Re数相同时,其中,进出口压力降与入口效应大约增加了16.12%摩擦系数,EDL效应增加了约6.84%摩擦系数.忽略3种微尺度效应,19.6 μm管流动摩擦系数与Hagen Poiseuille理论值几乎一致.     

用金属卟啉络合物引发合成高分子量聚醚

介绍了用四苯基卟啉铝络合物催化体系合成高分子量聚醚的方法。该聚合过程显示出一种持续特性。产物具有均一的链长和极窄的分子量分布，且数均分子量Ｍｎ可通过改变单体与引发剂的摩尔比来控制。     

Operation speed limited by the electric properties of?the?photorefractive spatial light modulator

With excellent photo-electric and electro-optical effects, the photorefractive spatial light modulators can work as optically addressed modulators in optical information processing systems and parallel optical computing systems. The photo-induced current pulses of the photorefractive spatial light modulator observed in the experiments are analyzed to conclude the characteristics, and to find the relationship between the properties of the current pulse and the structural parameters. Furthermore, the origin of the photo-induced current pulse is analyzed, and the methods to improve the operation speed of the spatial light modulators are proposed. The research results will be significant for extending the applications of the photorefractive spatial light modulators, and pushing ahead the research of all-optical modulation materials and devices for optical supercomputing.     

一种二维极坐标傅里叶描述子在图像检索中的应用

在图像检索中,形状描述是图像内容描述的关键部分。目前已经存在的大多数形状描述符均是基于某一特定应用的,不具有通用性。文章提出了一种基于二维极坐标傅里叶变换的傅里叶描述子对目标形状的描述方法,分析并实验验证了该方法的各个性质,并讨论了它的实际计算问题。实验结果表明,该描述符通用性强,鲁棒性高。     

一种高速折刀运动控制系统的设计与实现

针对高速折页机折刀高速运动的控制问题,设计开发了一种用于折刀高速启停运动的控制系统.该系统采用ATmega128单片机,光电开关、位置开关、编码盘等传感器和两套桥式驱动电路,解决了高速折刀的驱动问题.该系统弥补了PLC在高速折刀运动控制中的不足,在工业现场表现出较高的稳定性和实用性.