三门峡地区黄土工程特性

三门峡地区广泛分布第四纪黄土及黄土状土,通过分析该地区黄土的颗粒成分、矿物成分、化学成分、微观结构特征,分析了黄土的工程特性,结果表明:该地区Q3黄土的组成与中更新统黄土的矿物组成基本相近,颗粒组成以粉粒为主,黏粒含量大于我国西北地区,粉粒含量小于西北地区;全新统黄土、晚更新统黄土为中等、强湿陷性黄土,湿陷性系数为0.020~0.098,中更新统黄土一般不具有湿陷性。     

锗γ能谱测量中的符合相加修正

本文介绍了锗γ能谱测量中符合相加修正的原理和方法,给出了修正公式。分别计算了不同几何条件下两个锗探测器对一些放射性核素的符合相加修正因子,估计了符合相加修正因子对活度测量结果的误差贡献。     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

机车紧急制动装置使用中的几个问题

针对机车紧急制动装置使用中出现的问题进行了分析，并提出了几点解决问题的方法，对今后紧急制动装置的设计和使用具有一定的参考价值。     

A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO₂ laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc.     

基于"三层两网"结构的智能变电站监控信息分步验收方法

针对智能变电站"三层两网"的网络结构特点和监控信息直采直送的数据传送方式,提出了一种监控信息分步验收方法.该方法实现信息传送环节的全环节验证,并与新建站远动通道开通前站内的调试时间充裕、开通后监控验收时间紧张的特点相适应,有效解决了传统监控信息验收时间紧、验收质量无法得到有效保障的问题,已成功应用于湖南多个500 kV变电站的调试工程.     

心内膜三维几何模型交互式网格切割算法研究

针对心内膜三维标测系统中心内膜模型网格切割模块,提出一种新的交互式网格切割算法。系统在载入心内膜三维几何模型后初始化切割平板模型,由用户交互移动切割平板和旋转切割平板的法线。借助矩阵变换,针对心内膜三维几何模型实现能反映用户切割意图和保持网格细节特征的网格切割,而且切割平板可以消除锯齿效应。实验对比结果证明,该算法对于心内膜三维几何模型可以实现令用户满意的实时无锯齿交互式网格切割。     

Preparation and enhanced daylight-induced photo-catalytic activity of transparent C-Doped TiO<Subscript>2</Subscript> thin films

The transparent C-doped TiO₂ nanostructure films were fabricated on the silicate glass substrates by sol-gel spin-coated method. The as-prepared films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-visible absorption spectra (UV-vis) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated via the photo-catalytic oxidation of methylene blue in aqueous under daylight irradiation at room temperature. The results show that the daylight-induced photocatalytic activities of the as-prepared films are improved by the C-doping. The calcination temperatures significantly affect the morphology, microstructure and photocatalytic activity of the as-prepared samples. At 723 K, the C-doped TiO₂ films exhibit the highest photocatalytic activity due to the synergetic effects of good crystallization, appropriate oxygen vacancies and strong absorption in the near UV and visible-light region.