低温多效蒸发海水淡化系统热力分析

建立了喷射器低温多效蒸发海水淡化系统的数学模型,计算分析了各种温度损失随温度的变化,并研究了顶值盐水温度、蒸发器效数和动力蒸汽等参数对系统的造水比和生产单位质量淡水所需传热面积的影响。结果表明各种温度损失在末效蒸发器内显著增加;喷射器低温多效蒸发系统的热力特性明显优于多效蒸发系统;通过增加顶值盐水温度、蒸发器效数和动力蒸汽温度,可以实现系统的优化运行。     

Dendrite morphology of several steady state unidirectionally solidified iron base alloys

The experimental data are presented of the dendrite morphology of steady state unidirectionally solidified steels. The dendrite arm spacings were correlated with the equation A =KR ^mG^mwhereR is the growth rate and G the temperature gradient. The exponentsm andn for the primary arms are fairly close to the theoretical values (m = -0.25,n = -0.5). For the secondary arms they are about the same (-0.4). The primary arm spacings do not depend much on composition. The secondary arm spacings, however, decrease at fixed carbon content with increasing content of substitutional elements, and they were found to be smaller in a steel freezing as ferrite compared to steels freezing as austenite. All the authors were with Max-Planck Institut für Eisenforschung, 4 Düsseldorf 1, Max-Planck-Str. 1, Germany, at the time this investigation was carried out.     

Determination of diffusion controlled reaction rates at a solid/liquid interface using scanning electron microscopy

A high‐resolution method has been developed for the determination of localized values of interfacial reaction rate and mass transfer coefficient in aqueous solution. Scanning electron microscopy has been successfully applied to this problem through the measurement of electroplated film thickness formed under limiting current conditions. The method involves the calculation of local values of reaction rate via Faraday's laws and subsequent conversion of the data to absolute values of mass transfer coefficient. The technique has been verified in an undisturbed, turbulent flow regime (rotating cylinder electrode) through the use of Sherwood group dimensionless analysis. The resulting relationship shows comparable accuracy relative to electrochemical measurements. Favourable comparison has also been made with the generally accepted rotating cylinder correlation of Eisenberg, Tobias and Wilke. Differential rates of mass transfer to a single surface under conditions of disturbed flow have also been examined at a high spatial resolution using the stepped rotating cylinder electrode geometry. In this case, reaction rates have been measured as a function of circumferential distance within a recirculation zone situated immediately downstream of a backward‐facing step.     

A longitudinal study of the effects of ecological interface design on deep knowledge

Some researchers have argued that providing operators with externalized, graphic representations can lead to a trade-off whereby deep knowledge is sacrificed for cognitive economy and performance. This article provides an initial empirical investigation of this hypothesis by presenting a longitudinal study of the effect of ecological interface design (EID), a framework for designing interfaces for complex industrial systems, on subjects' deep knowledge. The experiment continuously observed the quasi-daily performance of the subjects' over a period of six months. The research was conducted in the context of DURESS II, a real-time, interactive thermal-hydraulic process control simulation that was designed to be representative of industrial systems. The performance of two interfaces was compared, an EID interface based on physical and functional (P+F) system representations and a more traditional interface based solely on a physical (P) representation. Subjects were required to perform several control tasks, including startup, tuning, shutdown and fault management. Occasionally, a set of knowledge elicitation tests was administered to assess the evolution of subjects' deep knowledge of DURESS II. The results suggest that EID can lead to a functionally organized knowledge base as well as superior performance, but only if subjects actively reflect on the feedback they get from the interface. In contrast, if subjects adopt a surface approach to learning, then EID can lead to a shallow knowledge base and poor performance, although no worse than that observed with a traditional interface.     

Spectral signal to clutter and thermal noise properties of ocean wave imaging synthetic aperture radars

Abstract

The high wavenumber detection cut-off is determined above which the spectrum of ocean waves imaged by a synthetic aperture radar (SAR) is lost in the background noise spectrum consisting of the clutter noise associated with the Rayleigh statistics of the backscattering surface and the thermal noise originating in the SAR system itself. For given power, the maximum detection cut-off wavenumber is attained if the SAR resolution is chosen such that the clutter and noise spectra are equal at the cut-off wavenumber. Assuming a constant modulation transfer function relating the image modulation and wave slope spectra, the cut-off wavenumber is in this case proportional to (ρ_aρ_g)^?1/2, where ρ_a and ρ_g represent the full bandwidth (single look) azimuthal and ground range resolutions, respectively. The same proportionality holds (but with a cut-off wavenumber increased by a factor √2) for a clutter limited cut-off, the normal operating condition of an SAR. To first order, incoherent multilook averaging has no influence on the signal-to-background detection cut-off wavenumber, provided the reduced Nyquist cut-off wavenumber resulting from the reduced multilook spatial resolution remains greater than the signal-to-background cut-off wavenumber. Estimates of the detection cut-off wave-numbers are given for the Seasat SAR and the SAR proposed for the European Remote Sensing Satellite ERS-1.     

Monte-Carlo simulation studies of the nonlinear imaging of a two dimensional surface wave field by a synthetic aperture radar

Abstract

The imaging of ocean surface waves by synthetic aperture radar (SAR) is investigated using two-dimensional Monte-Carlo simulations. The properties of the SAR imaging mechanism for windseas and swell in the Bragg scattering regime are discussed as a function of a few governing non-dimensional parameters formed from a combination of SAR and ocean wave parameters. The parameter ranges may be classified into three regimes corresponding to linear and weakly nonlinear, medium nonlinear and strongly nonlinear imaging. The nonlinearities are induced by motion effects (velocity bunching, velocity spread and acceleration smearing), while the real aperture radar (RAR) tilt and hydrodynamic modulation processes are regarded as linear. In the strongly nonlinear imaging regime, the velocity bunching mechanism causes a rotation of the spectral peak towards the range direction and a stretching of the peak wavelength. In addition, the azimuthal resolution is degraded through the Doppler spreading arising from the different facet velocities within a SAR resolution cell. The imaging properties in this regime are largely governed by two non-dimensional parameters, the velocity bunching and velocity smearing parameter. The nonlinear imaging distortions are strongest for broad spectra (windseas) and are significantly weaker for narrow-band swell. In the linear and weakly nonlinear imaging regime, the superposition of the hydrodynamic and tilt cross-section modulation and the velocity bunching transfer function normally produces a rotation of the spectral peak towards the azimuthal direction. The interference characteristics of these different modulation mechanisms depends on the wave propagation direction and can lead to a significant distortion of the image. This is often seen in large differences in the image modulation depths of waves propagating parallel and anti-parallel to the flight direction.     

Comparative experimental study on the use of original and compressed multispectral Landsat data for applied research

Abstract

Parts of two multispectral Landsat scenes, compressed by ratio 6·4/1, were investigated on the effect of the compression on the image contents. Landsat images of the Bayuda desert in Sudan and the Baltic Sea have been submitted to supervised maximum likelihood classification. Partitioning of classified images is given on a percentage basis as a function of sigma. Three-dimensional clusters of spectral channels and histograms show the influence of compression. Discussion of results shows effect of compression on partitioning of classified scenes, being displayed in several tables and figures.