In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Renal sodium excretion after oral or intravenous sodium loading in sodium-deprived normotensive and spontaneously hypertensive rats

Spontaneously hypertensive rats (SHR) and normotensive Wistar-Kyoto (WKY) rats that had been on a low sodium diet for 3 days were given 1.5 mmol sodium chloride kg-1 body weight either orally or intravenously. The rats receiving an oral sodium load showed a greater natriuresis than those receiving the same saline load intravenously. No increase of renal sodium excretion was observed when the rats received a hypertonic mannitol solution orally. The cumulative sodium excretion during the 8 h following oral loading was two to three times larger in SHR than in WKY, whereas no difference between strains could be demonstrated after giving saline intravenously. Furthermore, after switching from normal to low sodium diet the rate of decrease of renal sodium excretion was greater in SHR than in WKY rats. It is proposed that there exists a gastrointestinal sensory mechanism for sodium controlling the renal sodium excretion. Furthermore, it is suggested that the function of this mechanism differs between SHR and WKY.     

Pulmonary carcinogenicity of relatively low doses of beta-particle radiation from inhaled 144CeO2 in rats

This study was conducted to examine the carcinogenic effects of inhaled beta-particle-emitting radionuclides, particularly in lower dose regions in which there were substantial uncertainties associated with available information. A total of 2751 F344/N rats (1358 males and 1393 females) approximately 12 weeks of age at exposure were used. Of these, 1059 rats were exposed to aerosols of 144CeO2 to achieve mean desired initial lung burdens (ILBs) of 18 kBq (low level), 247 rats to achieve mean ILBs of 60 kBq (medium level) and 381 rats to achieve mean ILBs of 180 kBq (high level). Control rats (total of 1064) were exposed to aerosols of stable CeO2. Based on the 95% confidence intervals of the median survival times and the cumulative survival curves, there were no significant differences in the survival of groups of female and male exposed rats relative to controls. The mean lifetime beta-particle doses to the lungs of the rats in the four groups were: low level, 3.6 +/- 1.3 (+/-SD) Gy; medium level, 12 +/- 4.5 Gy; and high level, 37 +/- 5.9 Gy. The crude incidence of lung neoplasms increased linearly with increasing doses to the lungs (controls, 0.57%; low level, 2.0%; medium level, 6.1%; and high level, 19%). The estimated linear risk coefficients for lung neoplasms per unit of dose to the lung were not significantly different for the three dose levels studied. The risk coefficient at the lower level was 39 +/- 14 (+/-SE) excess lung neoplasms per 10(4) rat Gy; at the medium level the risk was 47 +/- 12; and at the higher level the risk was 50 +/- 9.0. The relationship of beta-particle dose to the lung and the crude incidence of lung neoplasms was described adequately by a linear function. We concluded that the risk of lung neoplasms in rats per unit of radiation dose did not increase with decreasing mean beta-particle dose to the lung over the range of 3.6 to 37 Gy. The weighted average of these three values was 47 +/- 6.4 (+/-SE) excess lung neoplasms per 10(4) rat Gy. To extend the risk coefficients for lung neoplasms to lower doses by experimentation will require much larger numbers of rats than used in this study.     

Emission of excited potassium species from an industrial iron catalyst for ammonia synthesis

The angular dependence of potassium emission-desorption is studied from a fused iron catalyst of the type used for ammonia synthesis. The excited species (K^*, K _n ^* , etc.) and positive ions K⁺ have strongly different angular distributions. The bilobular distribution measured for ion desorption is concluded to be either due to excited atoms, so-called Rydberg atoms, or excited clusters. Both types of species have to desorb from the edges of the sample and become field ionized and deexcited just outside the sample, as reported in previous studies on an iron oxide catalyst. The peak in the normal direction measured for excited species is due to excited cluster formation outside the catalyst surface. Similarities with previous results for other catalysts are observed. The possibility that the promoter function of potassium in the ammonia synthesis is due to excited species is pointed out.On leave from Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Cracow, Poland.     

Sociomaterial actors in the assimilation gap: a case study of web service, management and IT-assimilation

This paper investigates the conditions for the assimilation of information systems (IS) and information technology (IT) in organizations and the influence of various actors in the organization and eBusiness context. To do so it draws on the literature on assimilation gap, sociomateriality and infrastructure together with a study of implementation and use of information and communication technology in and among organizations in a Swedish region. There were substantial investments in web infrastructure made on a regional level and the focus of this study is how the investments were transformed and assimilated in practices, relations and communication. Based on the empirical data from the case study, the paper extends the assimilation process into interplay among actors in organizations contexts. It describes organizations’ strategies for coping with their needs for information and the actors in these processes. Two categories of actors are identified, sensemaking and sensegiving actors, as most important in assimilation of IS/IT in organizations. A sociomaterial perspective gives guidance and a better understanding of the assimilation process in terms of knowledge and interpretative frames, and how assimilation involves identity construction and negotiations among sensemaking and sensegiving actors. The contribution of this paper is a better understanding of the context of assimilation and adaptation of IT in organizations’ business processes, and steps to be taken to improve readiness.     

Subgingival microbial profile of Papillon-Lefèvre patients assessed by DNA-probes

The prevalence of 18 selected bacterial species was assessed by means of "checkerboard" DNA-DNA hybridisation in a group of 12 Saudi-Arabian adolescents with Papillon-Lefèvre syndrome. A total of 36 tooth sites were investigated. The patients exhibited severe periodontal disease with deep pockets. All 12 patients harboured the putative bacterial pathogens P. intermedia, F. nucleatum, P. micros and S. intermedius while T. denticola, B. forsythus, P. nigrescens, E. corrodens, S. noxia and C. rectus were recovered from 11 patients. P. gingivalis was recovered from 9 patients and 18 sites while corresponding figures for A. actinomycetemcomitans were 8 and 19, respectively. A number of the investigated species (B. forsythus, T. denticola, P. intermedia, C rectus) reached high levels (> or =10(6) cells) in more than 1/2 of the patients. On the other hand, bacteria such as A. actinomycetemcomitans and P. gingivalis were infrequently encountered at high levels in these subgingival samples. In conclusion, the analysis failed to demonstrate a PLS-specific profile of the subgingival infection, since the bacterial composition of the sampled sites closely resembled that characterising deep pockets in adult periodontitis patients.