Bulk and suspension polymerization of styrene in the presence of n-pentane. An evaluation of monofunctional and bifunctional initiation

The plasticizing effect of n-pentane on the rate of bulk free radical polymerization of styrene and molecular weight distribution development has been modeled on the basis of the free volume theory for both monofunctional and bifunctional initiation. A strong decrease in the reaction rate in the late stages of the polymerization, due to the displacement of the onset of the gel effect, has been observed for both types of initiation. This decrease in the polymerization rate limited the terminal conversion to values well below 100% for mono-functional initiation. However, in bifunctionally initiated polymerization, terminal conversions close to 100% were obtained in spite of the decrease in reaction rate. Contrary to what was expected, the molecular weight distribution obtained at terminal conversion was almost completely insensitive to these changes in polymerization rate. This phenomenon is explained in terms of limited transfer to monomer reactions when n-pentane is present in the system. In suspension polymerization, the limiting conversion and plasticizing effects of n-pentane in monofunctionally initiated systems, caused enhanced coalescence leading to suspension set-up. In bifunctionally initiated systems this enhanced coalescence was completely overcome by the short duration of the particle growth stage, owing to high polymerization rates, and stable suspensions were achieved. For these systems the particle size distributions obtained were similar to that of suspension polystyrene without n-pentane. © 1993 John Wiley & Sons, Inc.     

Effect of the marine environment on reinforced concrete durability in Iberoamerican countries: DURACON project/CYTED

This work presents some of the results from the project: “Effect of the environment on reinforcement durability” (DURACON) in its first two-years period, which investigates the influence of urban and marine meteorochemical parameters on the performance of reinforced concrete structures. The results presented in this investigation are from 21 marine test sites only (no urban environments are included), distributed among 11 countries (Argentina, Bolivia, Brazil, Chile, Colombia, Costa Rica, Mexico, Spain, Uruguay, Portugal and Venezuela). The environment was evaluated using ISO Standard 9223 and the concrete was characterized by measuring compressive strength, elastic modulus, total and effective porosity, chloride permeability according to ASTM standards, as well as the effective porosity and resistance to water absorption using the Fagerlund method. To that effect, concrete specimens (with and without reinforcement) were prepared for electrochemical and physical/mechanical/chemical tests using the existing materials in each participating country, following strict procedures which enabled the preparation of similar concrete samples. Two water/cement (w/c) ratios (0.45 and 0.65) were selected, where the concrete with 0.45 w/c ratio had to have a minimum cement content of 400 kg/m³ and the one with 0.65 w/c ratio a compressive strength of 210 kg/cm². Type I Portland cement, siliceous sand, and crushed rock as coarse aggregates (13-mm maximum nominal size) were used. After a one-year exposure, the results of the corrosion potentiality and probability analysis of the reinforcement in the different test stations showed that, for marine atmospheres, the most aggressive environment to induce steel corrosion was at Portugal’s Cabo Raso station, and the least aggressive one was at Chile’s Valparaíso station. These results are comparable with the ones found using electrochemical measurements, after a two-year exposure.     

Effect of prolactin suppression on gonadotrophic secretion in the puerperium

Serum levels of prolactin (PRL), FSH, LH and oestradiol-17 beta were determined by radioimmunoassay in 57 lactating women and in 20 women in whom lactation was inhibited by ergocryptine (CS-154). Women who breast fed their infants exhibited high PRL levels which abruptly declined within 48 h post-partum, and remained low for the duration of the study. Serum FSH was undetectable during the first week post-partum in lactating as well as in CB-154 treated women. Thereafter, lactating women showed increasing FSH levels which reached a maximum by the third week post-partum. These FSH values were higher in lactating women than in the CBS-154 treated group. In contrast, LH levels were higher in those women receiving CB-154. Serum oestradiol-17 beta remained in low levels throughout the study, and no difference was observed between the two groups of subjects. From these results it seems that: 1) inhibition of PRL secretion leads to a faster recovery of gonadotrophin secretion toward the "menstrual type", and 2) PRL suppression produces no effect on the ovarian oestrogen production.     

Multi-Level Composition for Software Federations

Reusability is the holly grail of software engineers. But reusability requires powerful composition mechanisms since the pieces to compose have no reason to match perfectly. Unfortunately, the composition mechanisms available today, mostly method call and component assembly are rather primitive. This paper shows what is the current state of the art in software composition, showing that there is little composition flexibility at code level, even using workflow approaches.The approach presented here claims that composition requires reasoning at different levels of abstraction. Workflow support is first decoupled from real tools, using abstract tool modeling. Contracts have been included to increase the independence between process and tools. Then, we have introduced conceptual abstractions linked by contract to real tools. Finally, we show that it is possible to define composition at the abstract level.The resulting system shows very high adaptability capabilities. Experience shows, however, that to be practical, this approach requires adapted framework and specialized tools. This paper shows the experience gained in implementing many versions of such a framework. The current system is currently in industrial use.     

Potassium sorbate controlled release from corn starch films

Active starch films with glycerol and potassium sorbate were obtained by casting. Native and acetylated corn starches, as well as the mixture of them in equal proportions were used and filmogenic suspensions with pH 4.5 were also prepared. Sorbate concentration decreased during film storage due to its oxidative degradation. Active films resulted more yellow and less transparent than films without sorbate. The minimum inhibitory concentration of sorbate resulted 0.3%, regardless of the starch type and the formulation pH. The use of antimicrobial package was more effective to prevent microbial growth on food surfaces than the use of conventional methods. Additive kinetic release was neither affected by the starch type nor by the formulation pH. Sorbate diffusion process was mathematically modeled satisfactorily. Active films were able to inhibit Candida spp., Penicillium spp., S. aureus and Salmonella spp. growth. Active films extended 21% the shelf life of refrigerated cheese, regardless of the formulation pH.     

Lead (II) detection and contamination routes in environmental sources, cookware and home-prepared foods from Zimatlán, Oaxaca, Mexico

An interdisciplinary investigation, involving environmental geochemists, epidemiologists, nurses, and anthropologists, was undertaken to determine the contamination source and pathway of an on-going outbreak of lead poisoning among migrants originating from Zimatlán, Oaxaca, Mexico and living in Seaside, California, and among their US-born children. An initial investigation in Seaside identified grasshopper foodstuff (“chapulines”) imported from Mexico and consumed as snacks, as containing alarmingly high lead concentrations (up to 2300 mg/kg). The focus in the present work concentrates on the Oaxacan area of origin of the problem in Mexico, and two potential sources of contamination were investigated: wind-borne dusts from existing mine residues as potential contaminants of soil, plant, and fauna; and food preparation practices using lead-glazed ceramic cookware.Over a three year period, sampling was conducted in Oaxaca using community-level sampling and also targeted sampling with families of cases with lead poisoning in California. In addition to fresh field chapulines, we analyzed for total lead: soil, water, mine residues, and plant materials, both from areas adjacent to or at an abandoned waste site containing mine tailings, and from fields where chapulines are collected; foodstuffs gathered in community markets or in a food transport business; and foodstuffs and cookware gathered from relatives of case families in California. Also, selected new and used lead-glazed clay cookware was extracted for lead, using 0.02 M citric acid and with 4% acetic acid.The results indicated significant presence of lead in mine wastes, in specific foodstuffs, and in glazed cookware, but no extensive soil contamination was identified. In-situ experiments demonstrated that lead incorporation in food is made very efficient through grinding of spices in glazed cookware, with the combination of a harsh mechanical action and the frequent presence of acidic lime juice, but without heating, resulting in high but variable levels of contamination.     

Chimney stoves modestly improved Indoor Air Quality measurements compared with traditional open fire stoves: results from a small‐scale intervention study in rural Peru

Nearly half of the world's population depends on biomass fuels to meet domestic energy needs, producing high levels of pollutants responsible for substantial morbidity and mortality. We compare carbon monoxide (CO) and particulate matter (PM_2.5) exposures and kitchen concentrations in households with study‐promoted intervention (OPTIMA‐improved stoves and control stoves) in San Marcos Province, Cajamarca Region, Peru. We determined 48‐h indoor air concentration levels of CO and PM_2.5 in 93 kitchen environments and personal exposure, after OPTIMA‐improved stoves had been installed for an average of 7 months. PM_2.5 and CO measurements did not differ significantly between OPTIMA‐improved stoves and control stoves. Although not statistically significant, a post hoc stratification of OPTIMA‐improved stoves by level of performance revealed mean PM_2.5 and CO levels of fully functional OPTIMA‐improved stoves were 28% lower (n = 20, PM_2.5, 136 μg/m³ 95% CI 54–217) and 45% lower (n = 25, CO, 3.2 ppm, 95% CI 1.5–4.9) in the kitchen environment compared with the control stoves (n = 34, PM_2.5, 189 μg/m³, 95% CI 116–261; n = 44, CO, 5.8 ppm, 95% CI 3.3–8.2). Likewise, although not statistically significant, personal exposures for OPTIMA‐improved stoves were 43% and 17% lower for PM_2.5 (n = 23) and CO (n = 25), respectively. Stove maintenance and functionality level are factors worthy of consideration for future evaluations of stove interventions.     

Protective Silica Coatings on Zinc-Sulfide-Based Phosphor Particles

A spray drying approach was used to apply 15-nm-thick SiO₂ continuous coatings onto ZnS:Ag phosphor particles. A prehydrolyzed TEOS dip coating formula was used as the SiO₂ precursor. The phosphor was mixed together with the precursor then atomized without allowing gelation to occur until the droplets containing the particles were in flight. The coating gelled and dried while falling through a graded heat zone. The dried coated particles were captured in a cyclone separator and heat-treated to further densify the SiO₂ coating. The coatings protected the phosphors while in service in field emission display (FED) devices.